yolov5-7.0实例分割使用Tensorrt推理（C++Api）

        yolov5的实例分割其实是在目标识别的基础上有增加一个output1，这个输出是mask的数据输出，所以推理也是在目标识别的基础上加了一些东西。

1、程序环境配置

        具体路径根据自己安装目录修改。

2、pt模型转engine模型

        首先需要获取Tensorrt推理时需要使用的engine模型。这里我直接使用yolov5的export.py进行导出。具体操作参考yolov5的pt模型转onnx模型，onnx模型转engine模型

 3、推理程序

        推理主要使用Tensorrt的C++的Api。程序里主要有logging.h和utils.h两个基础的头文件，这两个头文件不变，主要是含推理程序的yolo.hpp有一些修改。下面是具体程序：

logging.h

#pragma once
/*
 * Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef TENSORRT_LOGGING_H
#define TENSORRT_LOGGING_H

#include "NvInferRuntimeCommon.h"
#include <cassert>
#include <ctime>
#include <iomanip>
#include <iostream>
#include <ostream>
#include <sstream>
#include <string>

using Severity = nvinfer1::ILogger::Severity;

class LogStreamConsumerBuffer : public std::stringbuf
{
public:
    LogStreamConsumerBuffer(std::ostream& stream, const std::string& prefix, bool shouldLog)
        : mOutput(stream)
        , mPrefix(prefix)
        , mShouldLog(shouldLog)
    {
    }

    LogStreamConsumerBuffer(LogStreamConsumerBuffer&& other)
        : mOutput(other.mOutput)
    {
    }

    ~LogStreamConsumerBuffer()
    {
        // std::streambuf::pbase() gives a pointer to the beginning of the buffered part of the output sequence
        // std::streambuf::pptr() gives a pointer to the current position of the output sequence
        // if the pointer to the beginning is not equal to the pointer to the current position,
        // call putOutput() to log the output to the stream
        if (pbase() != pptr())
        {
            putOutput();
        }
    }

    // synchronizes the stream buffer and returns 0 on success
    // synchronizing the stream buffer consists of inserting the buffer contents into the stream,
    // resetting the buffer and flushing the stream
    virtual int sync()
    {
        putOutput();
        return 0;
    }

    void putOutput()
    {
        if (mShouldLog)
        {
            // prepend timestamp
            std::time_t timestamp = std::time(nullptr);
            tm* tm_local = new tm();
            localtime_s(tm_local, &timestamp);
            std::cout << "[";
            std::cout << std::setw(2) << std::setfill('0') << 1 + tm_local->tm_mon << "/";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_mday << "/";
            std::cout << std::setw(4) << std::setfill('0') << 1900 + tm_local->tm_year << "-";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_hour << ":";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_min << ":";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_sec << "] ";
            // std::stringbuf::str() gets the string contents of the buffer
            // insert the buffer contents pre-appended by the appropriate prefix into the stream
            mOutput << mPrefix << str();
            // set the buffer to empty
            str("");
            // flush the stream
            mOutput.flush();
        }
    }

    void setShouldLog(bool shouldLog)
    {
        mShouldLog = shouldLog;
    }

private:
    std::ostream& mOutput;
    std::string mPrefix;
    bool mShouldLog;
};

//!
//! \class LogStreamConsumerBase
//! \brief Convenience object used to initialize LogStreamConsumerBuffer before std::ostream in LogStreamConsumer
//!
class LogStreamConsumerBase
{
public:
    LogStreamConsumerBase(std::ostream& stream, const std::string& prefix, bool shouldLog)
        : mBuffer(stream, prefix, shouldLog)
    {
    }

protected:
    LogStreamConsumerBuffer mBuffer;
};

//!
//! \class LogStreamConsumer
//! \brief Convenience object used to facilitate use of C++ stream syntax when logging messages.
//!  Order of base classes is LogStreamConsumerBase and then std::ostream.
//!  This is because the LogStreamConsumerBase class is used to initialize the LogStreamConsumerBuffer member field
//!  in LogStreamConsumer and then the address of the buffer is passed to std::ostream.
//!  This is necessary to prevent the address of an uninitialized buffer from being passed to std::ostream.
//!  Please do not change the order of the parent classes.
//!
class LogStreamConsumer : protected LogStreamConsumerBase, public std::ostream
{
public:
    //! \brief Creates a LogStreamConsumer which logs messages with level severity.
    //!  Reportable severity determines if the messages are severe enough to be logged.
    LogStreamConsumer(Severity reportableSeverity, Severity severity)
        : LogStreamConsumerBase(severityOstream(severity), severityPrefix(severity), severity <= reportableSeverity)
        , std::ostream(&mBuffer) // links the stream buffer with the stream
        , mShouldLog(severity <= reportableSeverity)
        , mSeverity(severity)
    {
    }

    LogStreamConsumer(LogStreamConsumer&& other)
        : LogStreamConsumerBase(severityOstream(other.mSeverity), severityPrefix(other.mSeverity), other.mShouldLog)
        , std::ostream(&mBuffer) // links the stream buffer with the stream
        , mShouldLog(other.mShouldLog)
        , mSeverity(other.mSeverity)
    {
    }

    void setReportableSeverity(Severity reportableSeverity)
    {
        mShouldLog = mSeverity <= reportableSeverity;
        mBuffer.setShouldLog(mShouldLog);
    }

private:
    static std::ostream& severityOstream(Severity severity)
    {
        return severity >= Severity::kINFO ? std::cout : std::cerr;
    }

    static std::string severityPrefix(Severity severity)
    {
        switch (severity)
        {
        case Severity::kINTERNAL_ERROR: return "[F] ";
        case Severity::kERROR: return "[E] ";
        case Severity::kWARNING: return "[W] ";
        case Severity::kINFO: return "[I] ";
        case Severity::kVERBOSE: return "[V] ";
        default: assert(0); return "";
        }
    }

    bool mShouldLog;
    Severity mSeverity;
};

//! \class Logger
//!
//! \brief Class which manages logging of TensorRT tools and samples
//!
//! \details This class provides a common interface for TensorRT tools and samples to log information to the console,
//! and supports logging two types of messages:
//!
//! - Debugging messages with an associated severity (info, warning, error, or internal error/fatal)
//! - Test pass/fail messages
//!
//! The advantage of having all samples use this class for logging as opposed to emitting directly to stdout/stderr is
//! that the logic for controlling the verbosity and formatting of sample output is centralized in one location.
//!
//! In the future, this class could be extended to support dumping test results to a file in some standard format
//! (for example, JUnit XML), and providing additional metadata (e.g. timing the duration of a test run).
//!
//! TODO: For backwards compatibility with existing samples, this class inherits directly from the nvinfe