The CMAKE_CXX_COMPILER arm-none-eabi is not a full path and was not found in the PATH

mosepplin

已于 2023-11-22 17:18:18 修改

阅读量1.6k

点赞数 2

CC 4.0 BY-SA版权

文章标签： linux 运维服务器 stm32 arm开发 c语言

于 2023-11-22 17:10:05 首次发布

本文链接：https://blog.csdn.net/mosepplin/article/details/134557422

出现的错误如下（图是网上偷的，因为重启解决后，懒得复现错误自己截图）：

实际上我的错误提示应该是CMakeList.txt的第17行，而不是229。

解决办法是安装gcc-arm-none-eabi

添加环境变量（可以手动，也可以安装时勾选自动添加），到系统环境变量检查一下：

也可以打开命令行，执行以下下列命令：

arm-none-eabi-gcc --version
arm-none-eabi-g++ --version
arm-none-eabi-gdb --version
arm-none-eabi-size --version

如果命令正常有返回，安装就没问题：

在工程设置里重新设置一下c编译和c++的路径：

这时候刷新CMake，可能还是一样的错误。

重启一下就好了。

可以正常build:

补充下背景：

电脑出问题，于是通过恢复的方式重装了系统。CLion装在D盘还健在，只是需要重新激活。

工程也复制到别的盘备份了，Clion打开工程出问题，应该是 gcc-arm-none-eabi之前装在C盘，重装后就没了，所以要重装一下，在工程设置里重新配置一下。

确定要放弃本次机会？

福利倒计时

: :

立减 ¥

普通VIP年卡可用

立即使用

mosepplin

关注关注

2
点赞
踩
2

收藏

觉得还不错? 一键收藏
0
评论
分享

复制链接

分享到 QQ

分享到新浪微博

扫一扫
举报

举报

PX4源码分析15：初次编译，No CMAKE_CXX_COMPILER could be found，需要设置环境变量CXX

XL__MAX的博客

05-08

971

简略描述：验证nuttx安装完整性第一步：arm-none-eabi-gcc --version 第二步：sudo apt install gcc-arm-none-eabi 再次编译问题解决详细描述笔者用官方ubuntu.sh配置好编译环境后，初次用“make px4_fmu-v2_default”命令和“make px4_fmu-v3_default”命令编译1.10.1stb版本的P...

CMake报错「No CMAKE_CXX_COMPILER found」：跨平台编译器路径配置的自动化脚本

热门推荐

zy2317878的博客

11-14

5万+

CMAKE编译DCMTK中遇到的bug记录

clion arm-none-eabi-gcc is not a full path and was not found in the PATH.

zanpocc

08-16

591

Clion一个不好的特性，那就是Clion启动后会读取系统环境变量，后续它的终端启动运行都会使用这些环境变量，如果你在Clion启动后再添加一些环境变量，Clion中的终端则会读取不到。jetbrains软件应该都有这个问题，所以你如果发现在jetbrains软件中和在cmd中执行同一条命令，执行结果不一致，你就可以考虑下这个问题。解决方案是重启Clion。

The CMAKE_CXX_COMPILER: g++-8 is not a full path and was not found in the PATH.

m0_53993552的博客

11-04

724

1、输入编译命令：报错：g++-8解决办法：改为输入命令：

ubuntu 12.04 eclipse 报 program g++ not found in path

01-07

2万+

最近在ubuntu·系统中使用eclipse 编写c++ ，一直报 program g++ not found in path 错误，在网上各种找，最终找到解决办法。 1首先确认是否安装了gcc 与g++ 2.安装了以后查看eclipse 的window--》preference--》c/c++--》 build --》 setting --》discovery--》CDT GCC Build

S32DS导入工程后报错：“Program ‘arm-none-eabi-g++‘not found in PATH“

我是齐潇啊

10-27

4172

S32DS3.4导入工程后报错

Cmake编译，无法找到路径

sinat_34477890的博客

09-09

5258

cmake：cl is not a full path and was not found in the PATH.

解决 “ cmake-tools arm-none-eabi-gcc: error: unrecognized command-line option ‘-rdynamic‘ ” 问题

2303_78834656的博客

12-26

697

使用 vscode cmake-tools 插件进行 STM 工程构建时出现 “ error: unrecognized command-line option ‘-rdynamic’ ” 错误。但通过命令行 “ cmake …” 构建时，不会出现报错。

#THIS FILE IS AUTO GENERATED FROM THE TEMPLATE! DO NOT CHANGE! set(CMAKE_SYSTEM_NAME Generic) set(CMAKE_SYSTEM_VERSION 1) cmake_minimum_required(VERSION 3.28) # specify cross-compilers and tools set(CMAKE_C_COMPILER arm-none-eabi-gcc) set(CMAKE_CXX_COMPILER arm-none-eabi-g++) set(CMAKE_ASM_COMPILER arm-none-eabi-gcc) set(CMAKE_AR arm-none-eabi-ar) set(CMAKE_OBJCOPY arm-none-eabi-objcopy) set(CMAKE_OBJDUMP arm-none-eabi-objdump) set(SIZE arm-none-eabi-size) set(CMAKE_TRY_COMPILE_TARGET_TYPE STATIC_LIBRARY) # project settings project(untitled C CXX ASM) set(CMAKE_CXX_STANDARD 17) set(CMAKE_C_STANDARD 11) #Uncomment for hardware floating point #add_compile_definitions(ARM_MATH_CM4;ARM_MATH_MATRIX_CHECK;ARM_MATH_ROUNDING) #add_compile_options(-mfloat-abi=hard -mfpu=fpv4-sp-d16) #add_link_options(-mfloat-abi=hard -mfpu=fpv4-sp-d16) #Uncomment for software floating point #add_compile_options(-mfloat-abi=soft) add_compile_options(-mcpu=cortex-m7 -mthumb -mthumb-interwork) add_compile_options(-ffunction-sections -fdata-sections -fno-common -fmessage-length=0) # uncomment to mitigate c++17 absolute addresses warnings #set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-register") # Enable assembler files preprocessing add_compile_options($<$<COMPILE_LANGUAGE:ASM>:-x$<SEMICOLON>assembler-with-cpp>) if ("${CMAKE_BUILD_TYPE}" STREQUAL "Release") message(STATUS "Maximum optimization for speed") add_compile_options(-Ofast) elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "RelWithDebInfo") message(STATUS "Maximum optimization for speed, debug info included") add_compile_options(-Ofast -g) elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "MinSizeRel") message(STATUS "Maximum optimization for size") add_compile_options(-Os) else () message(STATUS "Minimal optimization, debug info included") add_compile_options(-Og -g) endif () include_directories(Core/Inc Drivers/STM32H7xx_HAL_Driver/Inc Drivers/STM32H7xx_HAL_Driver/Inc/Legacy Drivers/CMSIS/Device/ST/STM32H7xx/Include Drivers/CMSIS/Include) add_definitions(-DDEBUG -DUSE_HAL_DRIVER -DSTM32H743xx) file(GLOB_RECURSE SOURCES "Core/*.*" "Drivers/*.*") set(LINKER_SCRIPT ${CMAKE_SOURCE_DIR}/STM32H743XIHX_FLASH.ld) add_link_options(-Wl,-gc-sections,--print-memory-usage,-Map=${PROJECT_BINARY_DIR}/${PROJECT_NAME}.map) add_link_options(-mcpu=cortex-m7 -mthumb -mthumb-interwork) add_link_options(-T ${LINKER_SCRIPT}) add_executable(${PROJECT_NAME}.elf ${SOURCES} ${LINKER_SCRIPT}) set(HEX_FILE ${PROJECT_BINARY_DIR}/${PROJECT_NAME}.hex) set(BIN_FILE ${PROJECT_BINARY_DIR}/${PROJECT_NAME}.bin) add_custom_command(TARGET ${PROJECT_NAME}.elf POST_BUILD COMMAND ${CMAKE_OBJCOPY} -Oihex $<TARGET_FILE:${PROJECT_NAME}.elf> ${HEX_FILE} COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:${PROJECT_NAME}.elf> ${BIN_FILE} COMMENT "Building ${HEX_FILE} Building ${BIN_FILE}")

03-10

首先，用户可能是在进行ARM Cortex-M7的交叉编译，所以这个CMake文件配置了交叉编译工具链，比如arm-none-eabi-gcc和g++。我需要解释这些编译器设置的作用，以及为什么需要设置CMAKE_SYSTEM_NAME为Generic，因为...

# Include toolchain file include("cmake/gcc-arm-none-eabi.cmake")解释

02-18

set(CMAKE_CXX_COMPILER "${TOOLCHAIN_PATH}/arm-none-eabi-g++") set(CMAKE_ASM_COMPILER "${TOOLCHAIN_PATH}/arm-none-eabi-as") # 设置编译器标志（目标MCU为Cortex-M4） add_compile_options( -mcpu=cortex-m4...

*** Target 'HAL_Learn' uses ARM-Compiler 'Default Compiler Version 5' which is not available.

01-23

set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") ``` 这允许开发者切换到其他已知兼容的不同版本编译器上运行程序[^2]。 #### 方法三：更新至最新稳定版本考虑到长期维护性和性能优化方面的原因，建议尽可能升级到...

clion提示CMake Error at CMakeLists.txt:18 (project): The CMAKE_C_COMPILER: D:/tool/gcc-arm-none

qq_40947291的博客

08-23

1228

clion

omnet Program "g++" not found in PATH Program "gcc" not found in PATH

linfeng1993的专栏

02-20

2332

Program "g++" not found in PATH Program "gcc" not found in PATH PATH是系统的环境变量，将g++.exe和gcc.exe的路径加入到环境变量中就好。例如我加入的是: E:\omnetpp-4.6\tools\win32\mingw32\bin;E:\omnetpp-4.6\bin

cmake arm-none-eabi-gcc for stm32 cpp project

XiaoxingChen's blog

10-07

2791

尝试把原有的stm32工程F1canBootloader用cmake来管理，遇到了以下几个坑： 1. 报错，undefined reference to `__dso_handle'。 CMakeFiles/app.elf.dir/home/chenxx/engineering/stmproj/F1canBootLoader/iap/uartIapDevice.cpp.obj: In fu

通过add_subdirectory方式调用子目录cmake 报错 CMAKE_C_COMPILER is not a full path and was not found in the PATH

chengxiaili的博客

08-03

1025

通过add_subdirectory方式调用子目录cmake 报错 CMAKE_C_COMPILER is not a full path and was not found in the PATH一种可能解决方法

STM32 Makefile C/C++ 通用

kyzb002的专栏

07-04

1181

由Nordic SDK的gcc编译文件修改 Makefile: ########################################################################################################################## # File automatically-generated by tool: [projectgenerator] version: [3.7.1] date: [Fri Jul 03 2.

记录:Compiler: CMAKE_CXX_COMPILER-NOTFOUND

weixin_43364556的博客

12-23

3227

我的环境 1.docker容器-centos8 目的源码编译安装安装hh-suite 报错类型命令行报错： The CXX compiler identification is unknown CMakeError文件记录： Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" failed. Compiler: CMAKE_CXX_COMPILER-NOTFOUND Build flags: Id