BGP--联盟实验

R1

<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.14.1 24 
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.12.1 24
[R1-GigabitEthernet0/0/1]int lo0
[R1-LoopBack0]ip add 10.10.1.1 24
[R1-LoopBack0]quit
[R1]bgp 64512
[R1-bgp]rou	
[R1-bgp]route-select
[R1-bgp]router-id 1.1.1.1
[R1-bgp]con	
[R1-bgp]confederation id 200
[R1-bgp]peer 192.168.14.4 as 100
[R1-bgp]quit	
[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]area 0	
[R1-ospf-1-area-0.0.0.0]network 192.168.12.0 0.0.0.255	
[R1-ospf-1-area-0.0.0.0]network 10.10.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]quit
[R1]bgp 64512
[R1-bgp]peer 10.10.2.2 as 64512	
[R1-bgp]peer 10.10.2.2 connect-interface LoopBack 0
[R1-bgp]peer 10.10.2.2 next-hop-local

R2

<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy R2
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.12.2 24
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 192.168.23.2 24
[R2-GigabitEthernet0/0/1]int lo0
[R2-LoopBack0]ip add 10.10.2.2 24
[R2-LoopBack0]quit	
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0	
[R2-ospf-1-area-0.0.0.0]network 192.168.12.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 192.168.23.0 0.0.0.255	
[R2-ospf-1-area-0.0.0.0]network 10.10.2.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]return
[R2]bgp 64512
[R2-bgp]router-id 2.2.2.2
[R2-bgp]confederation id 200
[R2-bgp]peer 10.10.1.1 as 64512	
[R2-bgp]peer 10.10.1.1 connect-interface LoopBack 0
[R2-bgp]confederation peer-as 64513
[R2-bgp]peer 192.168.23.3 as 64513

R3

<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.23.3 24
[R3-GigabitEthernet0/0/0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.39.3 24
[R3-GigabitEthernet0/0/1]int lo0 
[R3-LoopBack0]ip add 10.10.3.3 24
[R3-LoopBack0]quit	
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0	
[R3-ospf-1-area-0.0.0.0]network 192.168.23.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 192.168.39.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]net	
[R3-ospf-1-area-0.0.0.0]network 10.10.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]return
[R3]bgp 64513
[R3-bgp]confederation id 200
[R3-bgp]router-id 3.3.3.3
[R3-bgp]confederation peer-as 64512
[R3-bgp]peer 192.168.23.2 as 64512
[R3-bgp]peer 10.10.9.9 as 64513	
[R3-bgp]peer 10.10.9.9 connect-interface LoopBack 0

R9

<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy R9
[R9]int g0/0/0
[R9-GigabitEthernet0/0/0]ip add 192.168.39.9 24
[R9-GigabitEthernet0/0/0]int g0/0/1
[R9-GigabitEthernet0/0/1]ip add 192.168.59.9 24
[R9-GigabitEthernet0/0/1]int lo0
[R9-LoopBack0]ip add 10.10.9.9 24
[R9-LoopBack0]quit
[R9]ospf 1 router-id 9.9.9.9
[R9-ospf-1]area 0	
[R9-ospf-1-area-0.0.0.0]network 192.168.39.0 0.0.0.255
[R9-ospf-1-area-0.0.0.0]network 10.10.9.0 0.0.0.255
[R9-ospf-1-area-0.0.0.0]quit
[R9]bgp 64513
[R9-bgp]router-id 9.9.9.9
[R9-bgp]confederation id 200
[R9-bgp]peer 10.10.3.3 as 64513
[R9-bgp]peer 10.10.3.3 connect-interface LoopBack 0
[R9-bgp]peer 10.10.3.3 next-hop-local
[R9-bgp]peer 192.168.59.5 as 300

R4

<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy R4
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 192.168.14.4 24
[R4-GigabitEthernet0/0/0]int lo0
[R4-LoopBack0]ip add 10.10.4.4 24
[R4-LoopBack0]q
[R4]bgp 100
[R4-bgp]router-id 4.4.4.4
[R4-bgp]peer 192.168.14.1 as 200
[R4-bgp]network 10.10.4.4 24

R5

<Huawei>u t m
Info: Current terminal monitor is off.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy R5
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 192.168.59.5 24
[R5-GigabitEthernet0/0/0]int lo0
[R5-LoopBack0]ip add 10.10.5.5 24
[R5-LoopBack0]q
[R5]bgp 300
[R5-bgp]router-id 5.5.5.5
[R5-bgp]peer 192.168.59.9 as 200
[R5-bgp]network 10.10.5.5 24