rivz可视化urdf报错:No transform from [base_link] to [base_footprint]

已于 2024-11-08 15:10:42 修改
阅读量1k 收藏 33
点赞数 10
CC 4.0 BY-SA版权
分类专栏： bxxx 文章标签： 嵌入式 硬件 c++
于 2024-11-08 15:10:03 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_49979053/article/details/143626775

环境

Ubuntu 20.04
ROS1: noetic

问题

∗.Launch*.Launch∗.Launch

<launch>
  <param name="robot_description"
    command="$(find xacro)/xacro --inorder '$(find zm_robot_description)/urdf/zm_robot.urdf.xacro'" />

  <!-- send fake joint values -->
  <node name="joint_state_publisher" pkg="joint_state_publisher" type="joint_state_publisher" />
最低0.47元/天 解锁文章

200万优质内容无限畅学
rviz 的Fixed Frame No transform from [base_link] to frame [map] [closed] (情况1-6，强烈推荐)，情况六很重要
pvmsmfchcs的博客
01-28 4495
问题原因：需要启动joint_state_publisher和robot_state_publisher节点，且需要将joint_state_publisher和robot_state_publisher加在了启动rviz前面(本人出现问题就是加在了后面)。一般是你设置了多终端通信，即你是现在运行的rosmaster不在本地，即你在其他终端运行了roscore，如果是请更改~/.bashrc文件的。可能你的世界坐标系设置不对，Fixed Frame是用于表示“世界”参考系的参考系。
ROS坐标系中base_link和base_footprint的区别
01-07
在学tf坐标变换时，误以为这两个是一个意思，并且在一篇博客中看到的解释也是：两者一样，只不过在turtlebot中是叫base_footprint。 后来在一段代码中看到base_footprint到base_link的坐标变换是：0 0 0.1 0 0 0，才明白原来两者的z坐标不一样，然后就再去查了一下，原来base_link一般是与机器人中心重合，而base_footprint是base_link原点在地面的投影（所以z坐标不一样）。（参考博客：https://blog.csdn.net/abcwoabcwo/article/details/101108477） 也可以参考ros问答论坛
turtlebot rviz错误rviz error no transporm from base to map
weixin_30387423的博客
07-27 688
按照ros_by_example_indigo_volume_1做的话，执行如下命令： roslaunch rbx1_bringup fake_turtlebot.launch rosrun rviz rviz -d `rospack find rbx1_nav`/sim.rviz 默认配置下，打开会出现诸多 Global Statue error，显示红色。解决方案...
机器人ROS系统各坐标系含义、关系与作用
06-12 1000
含义：全局固定坐标系，作为其他所有坐标系的参考基准。通常作为最高层级的父坐标系，与机器人所在的环境地图对齐。作用：提供绝对的位置参考，用于全局路径规划和导航。
胡春旭《ROS机器人开发实践》第六章：base_link :No transform from [base link] to [map]
m0_52008052的博客
05-29 2351
base_link :No transform from [base link] to [map]
ROS_RVIZ错误No transform from [base_link] to [map]
热门推荐
总结积累一些日常科研使用软件，方法与程序代码
04-02 1万+
项目场景： 提示：将urdf文件导入rivz时报错 例如：将urdf文件导入rivz时报错 No transform from [base_link] to [map] 问题描述： 终端输入： roslaunch ros_robotics ddrobot_rviz.launch model:=dd_robot.urdf 将urdf文件导入rivz时报错 No transform from [base_link] to [map] roslaunch ros_robotics ddrobot_rviz.la
【ros学习】11.ros建模时遇到No transform from [back_caster_link] to [base_link]不显示轮子
ArtemisKhryso的博客
10-12 4803
踩的坑，搜了好久才发现问题所在 建模时说No transform from [back_caster_link] to [base_link] 原因是启动文件里的joint_state_publisher节点没有启动，它是用来发布机器人的关节状态的 因为我们缺少这个功能包，当然无法启动这个节点 sudo apt-get install ros-xxx-joint-state-publisher-gui xxx替换为当前ros版本 kinetic indigo melodic 安装后再重新启动
rviz 的Fixed Frame No transform from [base_link] to frame [map] [closed]
qq_36559293的博客
06-24 5040
情况一： 可能你的世界坐标系设置不对，Fixed Frame是用于表示“世界”参考系的参考系。通常是“/map”，或“/base_link"， 修改这看是否正常， 情况二： 一般是你设置了多终端通信，即你是现在运行的rosmaster不在本地，即你在其他终端运行了roscore，如果是请更改~/.bashrc文件的 export ROS_MASTER_URI为本地地址，即 sudo vi ~/.bashrc export ROS_MASTER_URI=http://localhost:11311 然后so
EPRobot@EPRobot:~/robot_ws/src/eprobot_start/script/one_car_pkg$ roscd usb_cam EPRobot@EPRobot:/opt/ros/melodic/share/usb_cam$ source /opt/ros/melodic/setup.bash EPRobot@EPRobot:/opt/ros/melodic/share/usb_cam$ cd ~/robot_ws EPRobot@EPRobot:~/robot_ws$ source devel/setup.bash EPRobot@EPRobot:~/robot_ws$ roslaunch eprobot_start one_car_start.launch ... logging to /home/EPRobot/.ros/log/9641654e-6234-11f0-a6b3-e45f0131f240/roslaunch-EPRobot-2443.log Checking log directory for disk usage. This may take a while. Press Ctrl-C to interrupt Done checking log file disk usage. Usage is <1GB. started roslaunch server http://EPRobot:45445/ SUMMARY ======== CLEAR PARAMETERS * /ekf_se/ PARAMETERS * /amcl/base_frame_id: base_footprint * /amcl/global_frame_id: map * /amcl/gui_publish_rate: 10.0 * /amcl/initial_pose_a: 0.0 * /amcl/initial_pose_x: 0.0 * /amcl/initial_pose_y: 0.0 * /amcl/kld_err: 0.05 * /amcl/kld_z: 0.99 * /amcl/laser_lambda_short: 0.1 * /amcl/laser_likelihood_max_dist: 5.0 * /amcl/laser_max_beams: 60 * /amcl/laser_max_range: 12.0 * /amcl/laser_model_type: likelihood_field * /amcl/laser_sigma_hit: 0.2 * /amcl/laser_z_hit: 0.7 * /amcl/laser_z_max: 0.1 * /amcl/laser_z_rand: 0.3 * /amcl/laser_z_short: 0.1 * /amcl/max_particles: 2000 * /amcl/min_particles: 600 * /amcl/odom_alpha1: 0.2 * /amcl/odom_alpha2: 0.2 * /amcl/odom_alpha3: 0.2 * /amcl/odom_alpha4: 0.2 * /amcl/odom_alpha5: 0.1 * /amcl/odom_frame_id: odom * /amcl/odom_model_type: diff * /amcl/recovery_alpha_fast: 0.2 * /amcl/recovery_alpha_slow: 0.005 * /amcl/resample_interval: 0.4 * /amcl/transform_tolerance: 0.5 * /amcl/update_min_a: 0.05 * /amcl/update_min_d: 0.05 * /amcl/use_map_topic: True * /base_control/base_kd: 0.0 * /base_control/base_ki: 100.0 * /base_control/base_kp: 1000.0 * /base_control/base_kv: 1.0 * /base_control/is_send_anger: false * /camera_uri: http://192.168.3.... * /ekf_se/base_link_frame: /base_footprint * /ekf_se/debug: False * /ekf_se/debug_out_file: /path/to/debug/fi... * /ekf_se/frequency: 30 * /ekf_se/imu0: /imu_data * /ekf_se/imu0_config: [False, False, Fa... * /ekf_se/imu0_differential: False * /ekf_se/imu0_nodelay: True * /ekf_se/imu0_pose_rejection_threshold: 0.8 * /ekf_se/imu0_queue_size: 8 * /ekf_se/imu0_relative: True * /ekf_se/imu0_remove_gravitational_acceleration: True * /ekf_se/initial_estimate_covariance: ['1e-9', 0, 0, 0,... * /ekf_se/map_frame: /map * /ekf_se/odom0: /odom * /ekf_se/odom0_config: [False, False, Fa... * /ekf_se/odom0_differential: False * /ekf_se/odom0_nodelay: True * /ekf_se/odom0_queue_size: 5 * /ekf_se/odom0_relative: True * /ekf_se/odom_frame: /odom * /ekf_se/print_diagnostics: True * /ekf_se/process_noise_covariance: [0.01, 0, 0, 0, 0... * /ekf_se/publish_acceleration: True * /ekf_se/publish_tf: True * /ekf_se/sensor_timeout: 0.025 * /ekf_se/transform_time_offset: 0.0001 * /ekf_se/transform_timeout: 0.025 * /ekf_se/two_d_mode: True * /ekf_se/world_frame: /odom * /image_view/autosize: True * /laser_filter/scan_filter_chain: [{'type': 'laser_... * /lslidar_driver_node/angle_disable_max: 0 * /lslidar_driver_node/angle_disable_min: 0 * /lslidar_driver_node/compensation: False * /lslidar_driver_node/frame_id: base_laser_link * /lslidar_driver_node/high_reflection: False * /lslidar_driver_node/interface_selection: serial * /lslidar_driver_node/lidar_name: M10 * /lslidar_driver_node/max_range: 100.0 * /lslidar_driver_node/min_range: 0.1 * /lslidar_driver_node/pubPointCloud2: False * /lslidar_driver_node/pubScan: True * /lslidar_driver_node/scan_topic: scan * /lslidar_driver_node/serial_port: /dev/EPRobot_laser * /lslidar_driver_node/use_gps_ts: False * /map_server/frame_id: map * /move_base/TebLocalPlannerROS/acc_lim_theta: 0.3 * /move_base/TebLocalPlannerROS/acc_lim_x: 0.2 * /move_base/TebLocalPlannerROS/allow_init_with_backwards_motion: True * /move_base/TebLocalPlannerROS/cmd_angle_instead_rotvel: False * /move_base/TebLocalPlannerROS/costmap_converter_plugin: * /move_base/TebLocalPlannerROS/costmap_converter_rate: 5 * /move_base/TebLocalPlannerROS/costmap_converter_spin_thread: True * /move_base/TebLocalPlannerROS/costmap_obstacles_behind_robot_dist: 1.0 * /move_base/TebLocalPlannerROS/dt_hysteresis: 0.1 * /move_base/TebLocalPlannerROS/dt_ref: 0.3 * /move_base/TebLocalPlannerROS/dynamic_obstacle_inflation_dist: 0.2 * /move_base/TebLocalPlannerROS/enable_homotopy_class_planning: False * /move_base/TebLocalPlannerROS/enable_multithreading: True * /move_base/TebLocalPlannerROS/exact_arc_length: False * /move_base/TebLocalPlannerROS/feasibility_check_no_poses: 3 * /move_base/TebLocalPlannerROS/footprint_model/line_end: [0.1, 0.0] * /move_base/TebLocalPlannerROS/footprint_model/line_start: [-0.1, 0.0] * /move_base/TebLocalPlannerROS/footprint_model/type: line * /move_base/TebLocalPlannerROS/force_reinit_new_goal_dist: 0.5 * /move_base/TebLocalPlannerROS/free_goal_vel: False * /move_base/TebLocalPlannerROS/global_plan_overwrite_orientation: True * /move_base/TebLocalPlannerROS/global_plan_viapoint_sep: 3.0 * /move_base/TebLocalPlannerROS/h_signature_prescaler: 0.5 * /move_base/TebLocalPlannerROS/h_signature_threshold: 0.1 * /move_base/TebLocalPlannerROS/include_costmap_obstacles: True * /move_base/TebLocalPlannerROS/include_dynamic_obstacles: True * /move_base/TebLocalPlannerROS/inflation_dist: 0.35 * /move_base/TebLocalPlannerROS/is_footprint_dynamic: False * /move_base/TebLocalPlannerROS/legacy_obstacle_association: False * /move_base/TebLocalPlannerROS/max_global_plan_lookahead_dist: 10.0 * /move_base/TebLocalPlannerROS/max_number_classes: 2 * /move_base/TebLocalPlannerROS/max_vel_theta: 1.0 * /move_base/TebLocalPlannerROS/max_vel_x: 0.6 * /move_base/TebLocalPlannerROS/max_vel_x_backwards: 0.3 * /move_base/TebLocalPlannerROS/max_vel_y: 0.0 * /move_base/TebLocalPlannerROS/min_obstacle_dist: 0.55 * /move_base/TebLocalPlannerROS/min_turning_radius: 0.6 * /move_base/TebLocalPlannerROS/no_inner_iterations: 5 * /move_base/TebLocalPlannerROS/no_outer_iterations: 4 * /move_base/TebLocalPlannerROS/obstacle_association_cutoff_factor: 5.0 * /move_base/TebLocalPlannerROS/obstacle_association_force_inclusion_factor: 1.5 * /move_base/TebLocalPlannerROS/obstacle_cost_exponent: 5.5 * /move_base/TebLocalPlannerROS/obstacle_heading_threshold: 0.45 * /move_base/TebLocalPlannerROS/obstacle_keypoint_offset: 0.1 * /move_base/TebLocalPlannerROS/obstacle_poses_affected: 15 * /move_base/TebLocalPlannerROS/odom_topic: odom * /move_base/TebLocalPlannerROS/optimization_activate: True * /move_base/TebLocalPlannerROS/optimization_verbose: False * /move_base/TebLocalPlannerROS/oscillation_recovery: True * /move_base/TebLocalPlannerROS/penalty_epsilon: 0.08 * /move_base/TebLocalPlannerROS/roadmap_graph_area_length_scale: 1.0 * /move_base/TebLocalPlannerROS/roadmap_graph_area_width: 5 * /move_base/TebLocalPlannerROS/roadmap_graph_no_samples: 15 * /move_base/TebLocalPlannerROS/selection_alternative_time_cost: False * /move_base/TebLocalPlannerROS/selection_cost_hysteresis: 1.0 * /move_base/TebLocalPlannerROS/selection_obst_cost_scale: 1.0 * /move_base/TebLocalPlannerROS/selection_viapoint_cost_scale: 1.0 * /move_base/TebLocalPlannerROS/shrink_horizon_backup: True * /move_base/TebLocalPlannerROS/simple_exploration: False * /move_base/TebLocalPlannerROS/teb_autosize: True * /move_base/TebLocalPlannerROS/via_points_ordered: False * /move_base/TebLocalPlannerROS/visualize_hc_graph: False * /move_base/TebLocalPlannerROS/weight_acc_lim_theta: 1 * /move_base/TebLocalPlannerROS/weight_acc_lim_x: 1 * /move_base/TebLocalPlannerROS/weight_adapt_factor: 1.0 * /move_base/TebLocalPlannerROS/weight_dynamic_obstacle: 100 * /move_base/TebLocalPlannerROS/weight_dynamic_obstacle_inflation: 0.6 * /move_base/TebLocalPlannerROS/weight_inflation: 1.0 * /move_base/TebLocalPlannerROS/weight_kinematics_forward_drive: 800 * /move_base/TebLocalPlannerROS/weight_kinematics_nh: 1000 * /move_base/TebLocalPlannerROS/weight_kinematics_turning_radius: 6.0 * /move_base/TebLocalPlannerROS/weight_max_vel_theta: 1 * /move_base/TebLocalPlannerROS/weight_max_vel_x: 2 * /move_base/TebLocalPlannerROS/weight_obstacle: 190 * /move_base/TebLocalPlannerROS/weight_optimaltime: 15 * /move_base/TebLocalPlannerROS/weight_shortest_path: 5.0 * /move_base/TebLocalPlannerROS/weight_viapoint: 10.0 * /move_base/TebLocalPlannerROS/wheelbase: 0.3 * /move_base/TebLocalPlannerROS/xy_goal_tolerance: 0.1 * /move_base/TebLocalPlannerROS/yaw_goal_tolerance: 0.1 * /move_base/base_local_planner: teb_local_planner... * /move_base/clearing_rotation_allowed: False * /move_base/conservative_reset_dist: 0.2 * /move_base/controller_frequency: 5.0 * /move_base/controller_patience: 15.0 * /move_base/global_costmap/footprint: [[-0.18, -0.18], ... * /move_base/global_costmap/global_frame: map * /move_base/global_costmap/inflation_layer/cost_scaling_factor: 10.0 * /move_base/global_costmap/inflation_layer/enabled: True * /move_base/global_costmap/inflation_layer/inflation_radius: 0.3 * /move_base/global_costmap/inflation_radius: 0.4 * /move_base/global_costmap/laser_scan_sensor/clearing: True * /move_base/global_costmap/laser_scan_sensor/data_type: LaserScan * /move_base/global_costmap/laser_scan_sensor/marking: True * /move_base/global_costmap/laser_scan_sensor/topic: scan * /move_base/global_costmap/map_type: costmap * /move_base/global_costmap/observation_sources: laser_scan_sensor * /move_base/global_costmap/obstacle_layer/combination_method: 1 * /move_base/global_costmap/obstacle_layer/enabled: True * /move_base/global_costmap/obstacle_layer/inflation_radius: 0.2 * /move_base/global_costmap/obstacle_layer/obstacle_range: 6.5 * /move_base/global_costmap/obstacle_layer/raytrace_range: 6.0 * /move_base/global_costmap/obstacle_layer/track_unknown_space: False * /move_base/global_costmap/plugins: [{'type': 'costma... * /move_base/global_costmap/publish_frequency: 5.0 * /move_base/global_costmap/robot_base_frame: base_footprint * /move_base/global_costmap/static_layer/enabled: True * /move_base/global_costmap/static_layer/map_topic: /map * /move_base/global_costmap/static_map: True * /move_base/global_costmap/transform_tolerance: 0.5 * /move_base/global_costmap/update_frequency: 5.0 * /move_base/local_costmap/cost_scaling_factor: 10 * /move_base/local_costmap/footprint: [[-0.18, -0.18], ... * /move_base/local_costmap/global_frame: map * /move_base/local_costmap/height: 3 * /move_base/local_costmap/inflation_layer/cost_scaling_factor: 10.0 * /move_base/local_costmap/inflation_layer/enabled: True * /move_base/local_costmap/inflation_layer/inflation_radius: 0.3 * /move_base/local_costmap/inflation_radius: 0.16 * /move_base/local_costmap/laser_scan_sensor/clearing: True * /move_base/local_costmap/laser_scan_sensor/data_type: LaserScan * /move_base/local_costmap/laser_scan_sensor/marking: True * /move_base/local_costmap/laser_scan_sensor/topic: scan * /move_base/local_costmap/map_type: costmap * /move_base/local_costmap/observation_sources: laser_scan_sensor * /move_base/local_costmap/obstacle_layer/combination_method: 1 * /move_base/local_costmap/obstacle_layer/enabled: True * /move_base/local_costmap/obstacle_layer/inflation_radius: 0.2 * /move_base/local_costmap/obstacle_layer/obstacle_range: 6.5 * /move_base/local_costmap/obstacle_layer/raytrace_range: 6.0 * /move_base/local_costmap/obstacle_layer/track_unknown_space: False * /move_base/local_costmap/plugins: [{'type': 'costma... * /move_base/local_costmap/publish_frequency: 5.0 * /move_base/local_costmap/resolution: 0.05 * /move_base/local_costmap/robot_base_frame: base_footprint * /move_base/local_costmap/rolling_window: True * /move_base/local_costmap/static_layer/enabled: True * /move_base/local_costmap/static_layer/map_topic: /map * /move_base/local_costmap/static_map: False * /move_base/local_costmap/transform_tolerance: 0.5 * /move_base/local_costmap/update_frequency: 5.0 * /move_base/local_costmap/width: 3 * /move_base/oscillation_distance: 0.2 * /move_base/oscillation_timeout: 10.0 * /move_base/planner_frequency: 1.0 * /move_base/planner_patience: 5.0 * /robot_description: <?xml version="1.... * /rosdistro: melodic * /rosversion: 1.14.13 * /time0: 5.0 * /time1: 15.0 * /time2: 2.0 * /time3: 10.0 * /time4: 2.0 * /time5: 5.0 * /usb_cam/camera_frame_id: usb_cam * /usb_cam/color_format: yuv422p * /usb_cam/image_height: 960 * /usb_cam/image_width: 1280 * /usb_cam/io_method: mmap * /usb_cam/pixel_format: yuyv * /usb_cam/video_device: /dev/video0 NODES / amcl (amcl/amcl) base_control (eprobot_start/art_racecar.py) base_to_camera (tf/static_transform_publisher) base_to_gyro (tf/static_transform_publisher) base_to_laser (tf/static_transform_publisher) base_to_link (tf/static_transform_publisher) ekf_se (robot_localization/ekf_localization_node) image_view (image_view/image_view) joint_state_publisher (joint_state_publisher/joint_state_publisher) laser_filter (laser_filters/scan_to_scan_filter_chain) lslidar_driver_node (lslidar_driver/lslidar_driver_node) map_server (map_server/map_server) move_base (move_base/move_base) one_car_start (eprobot_start/one_car_start.py) robot_state_publisher (robot_state_publisher/robot_state_publisher) usb_cam (usb_cam/usb_cam_node) auto-starting new master process[master]: started with pid [2469] ROS_MASTER_URI=http://EPRobot:11311 setting /run_id to 9641654e-6234-11f0-a6b3-e45f0131f240 process[rosout-1]: started with pid [2498] started core service [/rosout] process[usb_cam-2]: started with pid [2502] process[image_view-3]: started with pid [2519] [ INFO] [1752663855.296181382]: Initializing nodelet with 4 worker threads. [ INFO] [1752663855.480798436]: using default calibration URL [ INFO] [1752663855.484462140]: camera calibration URL: file:///home/EPRobot/.ros/camera_info/head_camera.yaml [ INFO] [1752663855.491997843]: Starting 'head_camera' (/dev/video0) at 1280x960 via mmap (yuyv) at 30 FPS [ INFO] [1752663855.661129732]: Using transport "raw" Unable to init server: Could not connect: Connection refused (image_raw:2519): Gtk-WARNING **: 19:04:15.720: cannot open display: [ WARN] [1752663855.904948901]: unknown control 'focus_auto' process[base_to_link-4]: started with pid [2537] [image_view-3] process has died [pid 2519, exit code 1, cmd /opt/ros/melodic/lib/image_view/image_view image:=/usb_cam/image_raw __name:=image_view __log:=/home/EPRobot/.ros/log/9641654e-6234-11f0-a6b3-e45f0131f240/image_view-3.log]. log file: /home/EPRobot/.ros/log/9641654e-6234-11f0-a6b3-e45f0131f240/image_view-3*.log process[base_to_gyro-5]: started with pid [2556] process[base_to_laser-6]: started with pid [2562] process[base_to_camera-7]: started with pid [2583] process[joint_state_publisher-8]: started with pid [2604] process[robot_state_publisher-9]: started with pid [2610] /opt/ros/melodic/lib/python2.7/dist-packages/roslib/packages.py:470: UnicodeWarning: Unicode equal comparison failed to convert both arguments to Unicode - interpreting them as being unequal if resource_name in files: process[base_control-10]: started with pid [2618] process[lslidar_driver_node-11]: started with pid [2647] [ INFO] [1752663866.105583696]: Lidar is M10 [ INFO] [1752663866.111040782]: Opening PCAP file port = /dev/EPRobot_laser, baud_rate = 460800 open_port /dev/EPRobot_laser OK ! [ INFO] [1752663866.125467287]: Initialised lslidar without error process[laser_filter-12]: started with pid [2676] [ INFO] [1752663867.962878802]: clear_inside(!invert): true [INFO] [1752663869.073894]: base control start... process[map_server-13]: started with pid [2683] [INFO] [1752663869.127131]: LaserMode : Express [INFO] [1752663869.131959]: is_pub_odom_tf : false [INFO] [1752663869.138982]: is_send_anger : false [INFO] [1752663869.144625]: Opening Serial [INFO] [1752663869.150115]: Serial Open Succeed process[amcl-14]: started with pid [2718] [ INFO] [1752663871.037123474]: Subscribed to map topic. process[move_base-15]: started with pid [2774] process[ekf_se-16]: started with pid [2814] ERROR: cannot launch node of type [eprobot_start/one_car_start.py]: Cannot locate node of type [one_car_start.py] in package [eprobot_start]. Make sure file exists in package path and permission is set to executable (chmod +x) [ WARN] [1752663879.396290450]: Timed out waiting for transform from base_footprint to map to become available before running costmap, tf error: canTransform: target_frame map does not exist. canTransform: source_frame base_footprint does not exist.. canTransform returned after 0.100705 timeout was 0.1. [ INFO] [1752663880.901153484]: Received a 113 X 155 map @ 0.050 m/pix [ INFO] [1752663880.938459111]: Initializing likelihood field model; this can take some time on large maps... [ INFO] [1752663881.063300341]: Done initializing likelihood field model. [ WARN] [1752663883.460416017]: Transform from IMU_link to base_footprint was unavailable for the time requested. Using latest instead. [ WARN] [1752663884.436037594]: Timed out waiting for transform from base_footprint to map to become available before running costmap, tf error: canTransform: target_frame map does not exist.. canTransform returned after 0.100968 timeout was 0.1. [ WARN] [1752663886.469901598]: No laser scan received (and thus no pose updates have been published) for 1752663886.469788 seconds. Verify that data is being published on the /scan_filtered topic. [ WARN] [1752663887.516970206]: global_costmap: Pre-Hydro parameter "static_map" unused since "plugins" is provided [ WARN] [1752663887.518994345]: global_costmap: Pre-Hydro parameter "map_type" unused since "plugins" is provided [ INFO] [1752663887.523573417]: global_costmap: Using plugin "static_layer" [ INFO] [1752663887.657142563]: Requesting the map... [ INFO] [1752663889.166172394]: Resizing costmap to 113 X 155 at 0.050000 m/pix [ INFO] [1752663889.265445621]: Received a 113 X 155 map at 0.050000 m/pix [ INFO] [1752663889.280243055]: global_costmap: Using plugin "obstacle_layer" [ INFO] [1752663889.298549771]: Subscribed to Topics: [ INFO] [1752663889.349325212]: global_costmap: Using plugin "inflation_layer" [ WARN] [1752663889.545199085]: local_costmap: Pre-Hydro parameter "static_map" unused since "plugins" is provided [ WARN] [1752663889.547135725]: local_costmap: Pre-Hydro parameter "map_type" unused since "plugins" is provided [ INFO] [1752663889.551484224]: local_costmap: Using plugin "static_layer" [ INFO] [1752663889.571839522]: Requesting the map... [ INFO] [1752663889.577998384]: Resizing static layer to 113 X 155 at 0.050000 m/pix [ INFO] [1752663889.677619257]: Received a 113 X 155 map at 0.050000 m/pix [ INFO] [1752663889.693015967]: local_costmap: Using plugin "obstacle_layer" [ INFO] [1752663889.706179575]: Subscribed to Topics: [ INFO] [1752663889.742291675]: local_costmap: Using plugin "inflation_layer" [ INFO] [1752663889.976098453]: Created local_planner teb_local_planner/TebLocalPlannerROS [ INFO] [1752663890.170609667]: Footprint model 'line' (line_start: [-0.1,0]m, line_end: [0.1,0]m) loaded for trajectory optimization. [ INFO] [1752663890.172065624]: Parallel planning in distinctive topologies disabled. [ INFO] [1752663890.172326715]: No costmap conversion plugin specified. All occupied costmap cells are treaten as point obstacles. [ INFO] [1752663891.088227612]: Recovery behavior will clear layer 'obstacles' [ INFO] [1752663891.107617471]: Recovery behavior will clear layer 'obstacles' [ INFO] [1752663891.666258229]: odom received!
07-17
- 确保所有传感器在`URDF`中正确定义`<joint>`和`<link>` - 使用`static_transform_publisher`发布静态坐标变换： ```xml <node pkg="tf" type="static_transform_publisher" name="sensor_tf" args="0 0 0.1 0...
local_costmap: global_frame: odom robot_base_frame: base_footprint update_frequency: 5.0 publish_frequency: 2.0 rolling_window: true width: 2.0 height: 2.0 resolution: 0.05 transform_tolerance: 0.5 #cost_scaling_factor and inflation_radius were now moved to the inflation_layer ns inflation_layer: enabled: true cost_scaling_factor: 5.0 # exponential rate at which the obstacle cost drops off (default: 10) inflation_radius: 0.05 # max. distance from an obstacle at which costs are incurred for planning paths. plugins: ## - {name: obstacle_layer, type: "costmap_2d::VoxelLayer"} - {name: obstacle_layer, type: "costmap_2d::ObstacleLayer"} - {name: inflation_layer, type: "costmap_2d::InflationLayer"}
07-06
publish_frequency: 2.0 # 可视化发布频率 width: 3.0 # 地图宽度(米) height: 3.0 # 地图高度(米) resolution: 0.05 # 分辨率(米/格) plugins: - {name: static_layer, type: "costmap_2d::StaticLayer"} - ...
rviz中no transform from [map] to [base_footprint].出现这种情况该怎么解决
03-26
好的，我需要帮助用户解决RVIZ中出现的“no transform from map to base_footprint”错误。这个问题通常与ROS中的TF变换配置有关。首先，我得回顾一下用户提供的引用内容，看看有没有直接相关的信息。 根据引用[1]...
[ WARN] [1753340385.406994011]: Request for map failed; trying again... [ WARN] [1753340385.566176219, 378.086000000]: Timed out waiting for transform from base_footprint to map to become available before running costmap, tf error: canTransform: target_frame map does not exist.. canTransform returned after 378.085 timeout was 0.1. [ WARN] [1753340385.772789988, 378.296000000]: global_costmap: Pre-Hydro parameter "static_map" unused since "plugins" is provided [ WARN] [1753340385.773080319, 378.296000000]: global_costmap: Pre-Hydro parameter "map_type" unused since "plugins" is provided
最新发布
07-25
我们正在处理ROS导航栈中出现的两个问题：地图请求失败(map request failed)和从base_footprint到map的坐标变换超时(transform timeout from base_footprint to map)。根据引用内容，我们可以分析如下： 1. 引用[1]...
【ROS】xacro生成urdf时出现车轮no transform from...问题
stefan1998的博客
08-28 481
使用xacro生成小车时会出现轮子与车无法连接的问题，而摄像头、支撑杆等可以正常连接。使用urdf_to_graphiz查看结构图正常。
[ROS Unsolved]启动gazebo后，在rviz中添加机器人模型显示No transform from [base_link] to [base_footprint]
lzx_1007_zyx的博客
03-23 1213
直接引入robot_state_publisher和joint_state_publisher_gui这两个节点
ROS中遇到的问题：no transform from [left_back_wheel] to [base_link]
heres_的博客
09-07 1万+
软件环境：Ubuntu 16.04      ROS kinetic 问题发现： ROS学习（1）使用URDF创建机器人3D仿真模型 原地址：http://blog.csdn.net/akunainiannian/article/details/44985423 在URDF文件中构建机器人模型，并通过*.launch文件启动RViz观察构建的URDF文件，能启动Rviz但发现
ubuntu20.04使用rviz可视化查看urdf机器人模型
2301_80758686的博客
12-23 3824
如何使用rviz可视化查看urdf机器人模型
【ROS2机器人入门到实战】建图前准备2-发布 Odom 的 TF
生活不止眼前的苟且
09-01 4790
有了 odom 到 base_link/base_footprint 之间的变换，接下来我们来搞定 base_link 到机器人各个组件之间的变换。
ROS中的坐标系map、odom、base_link、base_footprint、base_laser
Keep Learning, Keep Growing, Keep Succeeding!
09-21 1万+
ROS最常用的坐标系为map、odom、base_link、base_footprint、base_laser坐标系。 map地图坐标系 一般设该坐标系为固定坐标系（fixed frame），一般与机器人所在的世界坐标系一致。 base_link机器人本体（基座）坐标系 与机器人中心重合，坐标系原点一般为机器人的旋转中心。 base_footprint坐标系 原点为base_link原...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值