SSDB主从配置

1、配置：

master：

只需在replication中把binlog打开即可，其它不需要配置

replication:
        binlog: yes
        # Limit sync speed to *MB/s, -1: no limit
        sync_speed: -1
        slaveof:
                # to identify a master even if it moved(ip, port changed)
                # if set to empty or not defined, ip:port will be used.
                #id: svc_2
                # sync|mirror, default is sync
                #type: sync
                #ip: 127.0.0.1
                #port: 8889

slave：

replication:
        binlog: yes
        # Limit sync speed to *MB/s, -1: no limit
        sync_speed: -1
        slaveof:
                # to identify a master even if it moved(ip, port changed)
                # if set to empty or not defined, ip:port will be used.
                id: svc_1
                # sync|mirror, default is sync
                type: sync
                ip: 192.168.111.19
                port: 8886

1) slaveof.id任意配置即可，并且只需要在slave上配置，master上不 需要进行任何配置slaveof.ip和slaveof.port是master的ip和post
2) type必须是sync，mirror是主主配置

2、监控：控制台输入info可进行主从监控

master：

ssdb 127.0.0.1:8886> info
…
binlogs
            capacity : 20000000
            min_seq  : 1
            max_seq  : 1
replication
        client 192.168.111.20:55744
            type     : sync
            status   : SYNC
            last_seq : 1
…

slave：

ssdb 127.0.0.1:8886> info
…
binlogs
            capacity : 20000000
            min_seq  : 1
            max_seq  : 1
replication
        slaveof 192.168.111.19:8886
            id         : svc_1
            type       : sync
            status     : SYNC
            last_seq   : 1
            copy_count : 0
            sync_count : 0
…

每一项的含义详见官方文档：http://ssdb.io/docs/zh_cn/replication.html
注意：
1) master的replication中是client，slave的replication中是slaveof
2) 主从是否同步到位，可比较binlogs.max_seq 和 replication.client.last_seq 是否相等