Elasticsearch教程(三),IK分词器安装 (极速版)

如果只想快速安装 IK  ,本教程管用。下面看经过。

简介:

  • 下面讲有我已经打包并且编辑过的zip包,你可以在下面下载即可。
  • 当前讲解的 IK分词器  包的 version 为1.8。

一、下载zip包。

    下面有附件链接【ik-安装包.zip】,下载即可。

二、上传zip包。

    下载后解压缩,如下图。

    

打开修改修改好后打成zip包。

  1. # 'elasticsearch.version' version of elasticsearch compiled against
  2. # You will have to release a new version of the plugin for each new
  3. # elasticsearch release. This version is checked when the plugin
  4. # is loaded so Elasticsearch will refuse to start in the presence of
  5. # plugins with the incorrect elasticsearch.version.
  6. #把这个版本号改成你对应的版本即可,如你的版本是2.2.0,就改成2.2.0
  7. elasticsearch.version=2.0.0
  1. /elasticsearch-2.0.0/plugins

在plugins/目录下上传,并且解压缩。此处注意目录结构必须是这样,如下图:


三、启动测试

    呃,我们发现报错了。

  1. [elasticsearch@iZ25x3wjytdZ elasticsearch-2.0.0]$ ./bin/elasticsearch
  2. [2016-03-01 10:32:02,958][INFO ][node ] [Landslide] version[2.0.0], pid[11109], build[de54438/2015-10-22T08:09:48Z]
  3. [2016-03-01 10:32:02,959][INFO ][node ] [Landslide] initializing ...
  4. Exception in thread "main" java.lang.IllegalStateException: Unable to initialize plugins
  5. Likely root cause: java.nio.file.FileSystemException: /home/elasticsearch/es/elasticsearch-2.0.0/plugins/ik.zip/plugin-descriptor.properties: Not a directory
  6. at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
  7. at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
  8. at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
  9. at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
  10. at java.nio.file.Files.newByteChannel(Files.java:317)
  11. at java.nio.file.Files.newByteChannel(Files.java:363)
  12. at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:380)
  13. at java.nio.file.Files.newInputStream(Files.java:108)
  14. at org.elasticsearch.plugins.PluginInfo.readFromProperties(PluginInfo.java:86)
  15. at org.elasticsearch.plugins.PluginsService.getPluginBundles(PluginsService.java:306)
  16. at org.elasticsearch.plugins.PluginsService.(PluginsService.java:112)
  17. at org.elasticsearch.node.Node.(Node.java:144)
  18. at org.elasticsearch.node.NodeBuilder.build(NodeBuilder.java:145)
  19. at org.elasticsearch.bootstrap.Bootstrap.setup(Bootstrap.java:170)
  20. at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:270)
  21. at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:35)

一看我们就知道,他去找plugins/ik.zip 下的配置文件对吧。

解决方案是把这个ZIP包删除即可。

删除后再次启动。

  1. [elasticsearch@iZ25x3wjytdZ elasticsearch-2.0.0]$ ./bin/elasticsearch
  2. [2016-03-01 10:32:02,958][INFO ][node ] [Landslide] version[2.0.0], pid[11109], build[de54438/2015-10-22T08:09:48Z]
  3. [2016-03-01 10:32:02,959][INFO ][node ] [Landslide] initializing ...
  4. Exception in thread "main" java.lang.IllegalStateException: Unable to initialize plugins
  5. Likely root cause: java.nio.file.FileSystemException: /home/elasticsearch/es/elasticsearch-2.0.0/plugins/ik.zip/plugin-descriptor.properties: Not a directory
  6. at sun.nio.fs.UnixException.translateToIOException(UnixException.java:91)
  7. at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
  8. at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
  9. at sun.nio.fs.UnixFileSystemProvider.newByteChannel(UnixFileSystemProvider.java:214)
  10. at java.nio.file.Files.newByteChannel(Files.java:317)
  11. at java.nio.file.Files.newByteChannel(Files.java:363)
  12. at java.nio.file.spi.FileSystemProvider.newInputStream(FileSystemProvider.java:380)
  13. at java.nio.file.Files.newInputStream(Files.java:108)
  14. at org.elasticsearch.plugins.PluginInfo.readFromProperties(PluginInfo.java:86)
  15. at org.elasticsearch.plugins.PluginsService.getPluginBundles(PluginsService.java:306)
  16. at org.elasticsearch.plugins.PluginsService.(PluginsService.java:112)
  17. at org.elasticsearch.node.Node.(Node.java:144)
  18. at org.elasticsearch.node.NodeBuilder.build(NodeBuilder.java:145)
  19. at org.elasticsearch.bootstrap.Bootstrap.setup(Bootstrap.java:170)
  20. at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:270)
  21. at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:35)

我们从启动就看的出来,IK分词器安装成功。

  1. [2016-03-01 10:34:28,803][INFO ][plugins ] [Big Wheel] loaded [analysis-ik], sites [head]

测试:

  1. http://123.57.163.79:9200/_analyze?analyzer=ik&pretty=true&text=sojson在线工具真好用

  1. {
  2. "tokens" : [ {
  3. "token" : "sojson",
  4. "start_offset" : 0,
  5. "end_offset" : 6,
  6. "type" : "ENGLISH",
  7. "position" : 0
  8. }, {
  9. "token" : "在线",
  10. "start_offset" : 6,
  11. "end_offset" : 8,
  12. "type" : "CN_WORD",
  13. "position" : 1
  14. }, {
  15. "token" : "工具",
  16. "start_offset" : 8,
  17. "end_offset" : 10,
  18. "type" : "CN_WORD",
  19. "position" : 2
  20. }, {
  21. "token" : "真好",
  22. "start_offset" : 10,
  23. "end_offset" : 12,
  24. "type" : "CN_WORD",
  25. "position" : 3
  26. }, {
  27. "token" : "好用",
  28. "start_offset" : 11,
  29. "end_offset" : 13,
  30. "type" : "CN_WORD",
  31. "position" : 4
  32. } ]
  33. }

得出Over , 有问题留言,或者找我,加群也可以。

资源下载链接为: https://pan.quark.cn/s/1bfadf00ae14 华为移动服务(Huawei Mobile Services,简称 HMS)是一个全面开放的移动服务生态系统,为企业和开发者提供了丰富的工具和 API,助力他们构建、运营和推广应用。其中,HMS Scankit 是华为推出的一款扫描服务 SDK,支持快速集成到安卓应用中,能够提供高效且稳定的二维码和条形码扫描功能,适用于商品扫码、支付验证、信息获取等多种场景。 集成 HMS Scankit SDK 主要包括以下步骤:首先,在项目的 build.gradle 文件中添加 HMS Core 库和 Scankit 依赖;其次,在 AndroidManifest.xml 文件中添加相机访问和互联网访问权限;然后,在应用程序的 onCreate 方法中调用 HmsClient 进行初始化;接着,可以选择自定义扫描界面或使用 Scankit 提供的默认扫描界面;最后,实现 ScanCallback 接口以处理扫描成功和失败的回调。 HMS Scankit 内部集成了开源的 Zxing(Zebra Crossing)库,这是一个功能强大的条码和二维码处理库,提供了解码、生成、解析等多种功能,既可以单独使用,也可以与其他扫描框架结合使用。在 HMS Scankit 中,Zxing 经过优化,以更好地适应华为设备,从而提升扫描性能。 通常,ScanKitDemoGuide 包含了集成 HMS Scankit 的示例代码,涵盖扫描界面的布局、扫描操作的启动和停止以及扫描结果的处理等内容。开发者可以参考这些代码,快速掌握在自己的应用中实现扫码功能的方法。例如,启动扫描的方法如下: 处理扫描结果的回调如下: HMS Scankit 支持所有安卓手机,但在华为设备上能够提供最佳性能和体验,因为它针对华为硬件进行了
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值