cisco packet tracer 8.2.2(思科模拟器) 交换机端口聚合配置

1 实验拓扑

2 交换机配置

#sw1
Switch>en
Switch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#hostname sw1
sw1(config)#vlan 2
sw1(config-vlan)#exit
sw1(config)#vlan 3
sw1(config-vlan)#exit
sw1(config)#int gigabitEthernet 1/0/1
sw1(config-if)#switchport mode access 
sw1(config-if)#switchport access  vlan 2
sw1(config-if)#exit
sw1(config)#int gigabitEthernet 1/0/2
sw1(config-if)#switchport mode access 
sw1(config-if)#switchport access  vlan 3
sw1(config-if)#exit
sw1(config)#int range  gigabitEthernet 1/0/3-4
sw1(config-if-range)#channel-group  1  mode on
sw1(config-if-range)#exit
sw1(config)#int port-channel  1
sw1(config-if)#switchport  mode  trunk 
sw1(config-if)#end
sw1#w

#sw2
Switch>en
Switch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(c