android boardconfig.mk,BoardConfig.mk

最新推荐文章于 2023-06-25 14:10:38 发布

邱锡鹏

最新推荐文章于 2023-06-25 14:10:38 发布

阅读量483

点赞数

文章标签： android boardconfig.mk

该内容是关于配置HiKey开发板的内核参数和存储分区大小的Makefile片段。针对不同内核版本（3.18），设置了不同的控制台设备和硬件标识。同时，定义了系统映像、用户数据映像和缓存映像的分区大小，以及闪存块大小。此外，还提及了一个与内核4.9及以上版本相关的打印选项。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

include device/linaro/hikey/BoardConfigCommon.mk

TARGET_BOARD_PLATFORM := hikey

ifeq ($(TARGET_KERNEL_USE), 3.18)

BOARD_KERNEL_CMDLINE := console=ttyAMA3,115200 androidboot.console=ttyAMA3 androidboot.hardware=hikey firmware_class.path=/system/etc/firmware efi=noruntime

else

BOARD_KERNEL_CMDLINE := console=ttyFIQ0 androidboot.console=ttyFIQ0 androidboot.hardware=hikey firmware_class.path=/system/etc/firmware efi=noruntime

endif

## printk.devkmsg only has meaning for kernel 4.9 and later

## it would be ignored by kernel 3.18 and kernel 4.4

BOARD_KERNEL_CMDLINE += printk.devkmsg=on

BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736

ifeq ($(TARGET_USERDATAIMAGE_4GB), true)

BOARD_USERDATAIMAGE_PARTITION_SIZE := 1595915776

else

BOARD_USERDATAIMAGE_PARTITION_SIZE := 5588893184

endif

BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456

BOARD_FLASH_BLOCK_SIZE := 131072

Makefile文件

22行

865 B

include device/linaro/hikey/BoardConfigCommon.mk

TARGET_BOARD_PLATFORM := hikey

ifeq ($(TARGET_KERNEL_USE), 3.18)

BOARD_KERNEL_CMDLINE := console=ttyAMA3,115200 androidboot.console=ttyAMA3 androidboot.hardware=hikey firmware_class.path=/system/etc/firmware efi=noruntime

else

BOARD_KERNEL_CMDLINE := console=ttyFIQ0 androidboot.console=ttyFIQ0 androidboot.hardware=hikey firmware_class.path=/system/etc/firmware efi=noruntime

endif

## printk.devkmsg only has meaning for kernel 4.9 and later

## it would be ignored by kernel 3.18 and kernel 4.4

BOARD_KERNEL_CMDLINE += printk.devkmsg=on

BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736

ifeq ($(TARGET_USERDATAIMAGE_4GB), true)

BOARD_USERDATAIMAGE_PARTITION_SIZE := 1595915776

else

BOARD_USERDATAIMAGE_PARTITION_SIZE := 5588893184

endif