matlab 错误使用feval_matlab仿真出现错误 consecutive zero crossings.

最新推荐文章于 2024-10-14 11:39:08 发布

热茶走

最新推荐文章于 2024-10-14 11:39:08 发布

阅读量4.4k

点赞数 7

CC 4.0 BY-SA版权

文章标签： matlab 错误使用feval

本文链接：https://blog.csdn.net/weixin_33575756/article/details/112146636

在matlab仿真过程中遇到一个错误，错误信息提及feval的错误使用，导致了连续零交叉的问题。文章探讨了该问题的翻译及可能的解决方案。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

matlab仿真出现错误

An error occurred while running the simulation and the simulation was terminated
Caused by:
At time 5.9166658606763667, simulation hits (1000) consecutive zero crossings.
 Consecutive zero crossings will slow down the simulation or cause the simulation to hang.
 To continue the simulation, you may 
1) Try using Adaptive zero-crossing detection algorithm or 
2) Disable the zero crossing of the blocks shown in the following table. 
 --------------------------------------------------------------------------------
Number of consecutive zero-crossings : 2002
           Zero-crossing signal name : Sf0
                          Block type : S-Function
                          Block path : 'A12ThewholebridgefilteringDiodeRL/powergui/Equivale