linux gpio按键驱动程序,Linux GPIO Key 驱动的加载

gpio-keys是基于input子系统实现的一个通用的GPIO按键驱动,基于platform来实现,位于drivers/input/keyboard/gpio_keys.c,这个文件是硬件无关的,而硬件有关的需要我们自己来注册.进入这个gpio_keys.c这个函数,第一步就是初始化.

static int __init gpio_keys_init(void)

{

return platform_driver_register(&gpio_keys_device_driver);

}

然后加载这个结构体:

static struct platform_driver gpio_keys_device_driver = {

.probe = gpio_keys_probe,

.remove = __devexit_p(gpio_keys_remove),

.driver = {

.name = "gpio-keys",

.owner = THIS_MODULE,

#ifdef CONFIG_PM

.pm = &gpio_keys_pm_ops,

#endif

}

};

进入后会执行probe函数,进行设备的probe.当然只是注册设备,没什么必要看.还比如gpio_keys_isr就是去抖动检测,这是上半部分函数.

static irqreturn_t gpio_keys_isr(int irq, void *dev_id)

{

struct gpio_button_data *bdata = dev_id;

struct gpio_keys_button *button = bdata->button;

BUG_ON(irq != gpio_t