CH579M配置选项输入密码配对

/*********************************************************************
 * MACROS
 */
// HID keyboard input report length
#define HID_KEYBOARD_IN_RPT_LEN     8

// HID LED output report length
#define HID_LED_OUT_RPT_LEN         1

/*********************************************************************
 * CONSTANTS
 */
// Param uodate delay
#define START_PARAM_UPDATE_EVT_DELAY          3200

// HID idle timeout in msec; set to zero to disable timeout
#define DEFAULT_HID_IDLE_TIMEOUT              60000

// Minimum connection interval (units of 1.25ms)
#define DEFAULT_DESIRED_MIN_CONN_INTERVAL     8

// Maximum connection interval (units of 1.25ms)
#define DEFAULT_DESIRED_MAX_CONN_INTERVAL     8

// Slave latency to use if parameter update request
#define DEFAULT_DESIRED_SLAVE_LATENCY         0

// Supervision timeout value (units of 10ms)
#define DEFAULT_DESIRED_CONN_TIMEOUT          500

// Default passcode
#define DEFAULT_PASSCODE                      888888

// Default GAP pairing mode
#define DEFAULT_PAIRING_MODE                  GAPBOND_PAIRING_MODE_WAIT_FOR_REQ

// Default MITM mode (TRUE to require passcode or OOB when pairing)
#define DEFAULT_MITM_MODE                     TRUE			//配对时需要密码

// Default bonding mode, TRUE to bond
#define DEFAULT_BONDING_MODE                  TRUE

// Default GAP bonding I/O capabilities
#define DEFAULT_IO_CAPABILITIES               GAPBOND_IO_CAP_DISPLAY_YES_NO  //GAPBOND_IO_CAP_NO_INPUT_NO_OUTPUT

// Battery level is critical when it is less than this %
#define DEFAULT_BATT_CRITICAL_LEVEL           6