Fee

最新推荐文章于 2025-06-20 14:17:43 发布

zwmyxfbenet

最新推荐文章于 2025-06-20 14:17:43 发布

阅读量1.2k

点赞数

CC 4.0 BY-SA版权

分类专栏：汽车文章标签： FEE NVM

本文链接：https://blog.csdn.net/zwmyxfbenet/article/details/44242969

汽车专栏收录该内容

1 篇文章

订阅专栏

本文详细介绍了FEE模块的初始化过程，包括上电初始化假设条件、全局变量初始化步骤及状态机启动流程等内容。适用于理解FEE模块如何进行上电初始化。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

1、上电初始化过程

1.1、假设

假设FLASH之前没有写过任何数据，也即两个Sector都处于擦除状态，也即意味着从FLASH中读出来的数据全为0xFFu；

假设总共配置了165个BLOCK（包括FEE模块默认的两个BLOCK）；

假设每个BLOCK的配置内容中：

number of datasets： 1

instances exponent： 1

immediate data： FALSE

critical data: FALSE

1.2、初始化函数

FUNC(void, FEE_API_CODE) Fee_Init(P2CONST(Fee_ConfigType, AUTOMATIC, FEE_APPL_CONFIG) ConfigPtr)  /* PRQA S 1503 */ /* MD_MSR_14.1 */
{
  /* Check data buffer parameter for being valid address. */
#if (STD_ON == FEE_CFG_CHK_PARAM_NULL_POINTER)

    /* Is pointer to a data buffer valid? */
    if (NULL_PTR == ConfigPtr)
    {
        /* Report development error. */
        Fee_Errorhook(FEE_SID_INIT, FEE_E_PARAM_DATABUFFERPTR);      /* PRQA S 3200 */ /* MISRA-C:2004 Rule 16.10 According to a component requirement the return values of that function is right and has to be ignored. */

        /* stay unitialized / explicitly unitialize */
#       if (STD_ON == FEE_CFG_CHK_STATUS_UNINIT)
            Fee_ModuleStatus_t = MEMIF_UNINIT;
#       endif

        return;
    }
#endif

  /* set the config pointer */
  Fee_Globals_t.Config_ptloc = ConfigPtr;

  /****************************************************************************
   * Initialize global variables
   ***************************************************************************/
  Fee_Globals_t.FlsJobResult_t = MEMIF_JOB_OK;
  Fee_Globals_t.FeeModuleStatus_t = MEMIF_BUSY_INTERNAL;
  Fee_Globals_t.FeeJobResult_t = MEMIF_JOB_OK;
  Fee_Globals_t.FeeLocalJobResult_t = FEE_LOCAL_JOB_RESULT_OK;
  Fee_Globals_t.InternalFlags_t = 0u;
  Fee_Globals_t.ApiFlags_t = 0u;
  Fee_Globals_t.SectorSwitchFlags.Request_t = 0;
  
  Fee_Globals_t.SectorSwitchFlags.Prio_t = FEE_SS_SECTOR_FORMAT; /* must not be 0!! */
  Fee_Globals_t.SectorSwitchFlags.Mask_t = 0;

  Fee_Globals_t.SectorSwitchBlockNumber_u16 = 0;
  Fee_Globals_t.CurrentSector_pt = 
      Fee_Globals_t.OperatingSector_pt = &Fee_SectorConfig_at[0];

  Fee_Globals_t.WritesSuspended_bl = FALSE;

  /* set the FlsSectorEraseIndex to FEE_SECTOR_ERASE_FINISHED, which represents a successfully finished Fls erase */
  Fee_Globals_t.FlsSectorEraseIndex_u16 = 0;

  /* Start Fls job to read the lower sector header.
   * Reading only 4 bytes of the lower sector header where the Sector ID is located, because the sector ID is
   * utilized to evaluate a valid sector[用于评估sector的有效性].
   */
  Fee_InternalPrepareSectorHeaderRead(FEE_LOWER_SECTOR_NUMBER);

  /****************************************************************************
   * Initialize the FSM stack and start the state machine
   *   only the first two levels of the FSM stack must be initialized, because all 
   *   other will be initialized before increasing the stack pointer
   ***************************************************************************/
  Fee_Globals_t.FsmStack_t.TopOfStack_u8 = 1u;
  Fee_Globals_t.FsmStack_t.Stack_at[0] = FEE_STATE_MAIN_STARTUP;
  Fee_Globals_t.FsmStack_t.Stack_at[1] = FEE_STATE_STARTUP_READ_SECTOR_HEADER_LOWER;

#ifdef FEE_TESTING_LOG_TRANSITIONS
    TsxFee_LogFsmCompleteReinitialization(FEE_STATE_MAIN_STARTUP);
    TsxFee_LogFsmInitalization(FEE_STATE_STARTUP_READ_SECTOR_HEADER_LOWER);
#endif
  /****************************************************************************
   * Initialize the component
   ***************************************************************************/
#if (STD_ON == FEE_CFG_CHK_STATUS_UNINIT)
    Fee_ModuleStatus_t = MEMIF_IDLE;
#endif /* (STD_ON == FEE_CFG_CHK_STATUS_UNINIT) */
} /* End of Fee_Init() */       /* PRQA S 2006 */ /* MD_MSR_14.7 */