RINEX 2.11中MATLAB上的总电子含量（TEC）计算：基于双频接收机（GPS）计算TEC.zip

This is the README file for the Total Electron Content(TEC) calculation on MATLAB from RINEX 2.11 Calculate TEC based on dual-frequency receiver (GPS) Original by Napat Tongkasem, Somkit Sopan, Jirapoom Budtho, Nantavit Wongthodsarat Version 1.2 (15/02/2019) - Create the program (04/10/2022) - Fix some bug (Outlinier correction, receiver position, ROTI , Ploting) (10/10/2022) - Update Roti calculation (26/06/2023) - Update azimuth and IPP computation 1. The program need linux command. Cygwin must be installed - install Cygwin-setup-x86_64.exe (64-bit ver.) or download: http://cygwin.com/install.html 2. Main program is ProcessTECCalculation.m 3. We have laboratory website, you can visit - http://iono-gnss.kmitl.ac.th/ ================================================= Advisor: Prof.Dr. Pornchai Supnithi CSSRG Laboratory School of Telecommunication Engineering Faculty of Engineering King Mongkut's Institute of Technology Ladkrabang Bangkok, Thailand ================================================= Output: data 1 day TEC.vertical = Vertical Total Electron Content(VTEC) TEC.slant = Slant Total Electron Content(STEC) TEC.withrcvbias = STEC with receiver DCB TEC.withbias = STEC with satellite and receiver DCB TEC.STECp = STEC calculated from code range TEC.STECl = STEC calculated from carrier phase DCB.sat = Satellite DCB DCB.rcv = Receiver DCB prm.elevation = elevation angle prm.azimuth = azimuth angle prm.IPP_(lat,long)= IPP position ROTI = Rate Of Change TEC Index