FJ Software 欧姆龙视觉设计软件OMRON

******************************************************************************* FJ Software Setup CD-ROM (C) Copyright OMRON Corporation ******************************************************************************* ------------------------------------------------------------------------------- 1. Items Included on the CD-ROM ------------------------------------------------------------------------------- - FJ Software Setup Software ------------------------------------------------------------------------------- 2. Note ------------------------------------------------------------------------------- - If you are running in 64 bit operating system. You must install "pylon C Runtime", "pylon VB6 Runtime" and "pylon .NET Runtime". Please select these modules in custom setup dialog. + pylon Runtime Environment + Additional Runtimes - pylon C Runtime - pylon VB6 Runtime - pylon .NET Runtime ------------------------------------------------------------------------------- 3. Trouble Shooting ------------------------------------------------------------------------------- - Setup software does not start automatically when inserting CD-ROM. Please use Windows Explorer to open the installation and double-click “SelectInstallSW.exe” manually. - Error message window is shown when inserting CD-ROM into your PC, or starting SelectInstallSW.exe manually. Please check that .NET Framework 3.5 or 3.5 SP1 is installed (and enabled) on your PC. .NET Framework is needed before installing this software. You can check it from Control Panel. .NET Framework 3.5 is not automatically installed with Windows 8 or later. Installing .NET Framework 3.5 requires an Internet connection. If you cannot connect to Internet, you can install the .NET Framework 3.5 using the install media you installed Windows 8 or later for. If .NET Framework 3.5 already has installed, please contact our customer service. - Installation program of FJ software shows error message which indicates error code 2908. A part of registry of your PC may be broken. In this case, installation program cannot register the information of installation, and failed installation process. To solve this problem, please contact our customer service. - After installation of device driver, a problem regarding internet connection happened. Please open Control panel -> Network Connections -> (connection with problem) and uncheck GigE Driver - When installing device drivers, PC froze. It takes about 5 to 10 minutes to install device drivers in some cases. Please wait for a while, and check installation process. If the installation was not finished, please contact our customer service.