DA14531经典应用例程

# Smartbond SDK6 Application Examples This is the repository storing example for the [DA145xx family](https://www.dialog-semiconductor.com/products/bluetooth-low-energy/da14530-and-da14531). For information about the DA145xx platform and how to bring up your development kit, please refer to the [Getting started User Manual](http://lpccs-docs.dialog-semiconductor.com/UM-B-117-DA14531-Getting-Started-With-The-Pro-Development-Kit/index.html) ## Examples Overview |Module |DA14531 Pro Dev Kit |DA14585 Pro Dev Kit|DA14585 Basic Kit | DA14531 USB Kit | Example name |Key Words | Example Description | |-----------------------|-----------------------|-------------------|-----------------------|---------------------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |--------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | |:heavy_check_mark: |:heavy_check_mark: | | |[active\_scanner](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/active_scanner) |scanning mode - advertising data - UART |This example shows how to setup the DA145xx device in active scanning mode,  On advertising data report, the data is formatted and pushed on the UART | | | | | | | | | | | |:heavy_check_mark: | :heavy_check_mark:| | | [advertising](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/advertising_example) |button - advertising - Sleep- Wakeup up |This example shows how to Use a button to switch between advertising methods, Go for sleep and wakeup , Timer callback is used | | | | | | | | | | | |:heavy_check_mark: | :heavy_check_mark:| | | [burst\_adv](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/ble_burst_adv) |Burst advertising - UART |This is a simple example showing how to implement 'burst' advertising on the DA14531 and DA14585/6 devices | | | | | | | | | | | |:heavy_check_mark: | :heavy_check_mark:| | | [button\_Wakeup](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/ble_Notify_button_Wakeup) | notification - BLE -Button presses |This example shows how to configure a DA14531 or DA14585/586 device to send notifications to a BLE central by button presses | | | | | | | | | | | |:heavy_check_mark: |:heavy_check_mark: | | | [pressure\_sensor](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/ble_pressure_sensor_bmp388) |BLE- PRESSURE 5 CLICK Board™ |This is Simple example showing how to interface the DA14585/586 and DA14531 with the PRESSURE 5 CLICK Board™ | | | | | | | | | | | |:heavy_check_mark: |:heavy_check_mark: | | | [ble\_temperature](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/ble_temperature_ntf) |MCP9808-  Thermo 8 click board -I2C |This is Simple example showing how to interface the DA14585/586 and DA14531 with the Thermo 8 click board™ | | | | | | | | | | | | | | :heavy_check_mark: | | [BLE2IR](https://github.com/dialog-semiconductor/BLE_SDK6_examples/tree/main/connectivity/BLE2IR) |Remote Control Unit |This example provides an implementation of a Simple RCU using a custom BLE profile