在ADS中使用传输端口参数构建理想元器件模型-以3dB电桥为例-工程文件

hpeesofsim (*) 572.shp Mar 28 2023, MINT version 5 (64-bit windows built: Tue Mar 28, 2023 23:58:00 +0000) ***** Simulation started at Sat Aug 10 22:48:59 2024 Running on host: "WXP_PRO" In Directory: "K:\Project_WXP\20240803_LMBA\ADS_Cripps\ADS_Cripps_wrk\data" Process ID: 15164 Warning detected by hpeesofsim in topology check during circuit set up. Number of nodes with no DC path to ground (topology corrected): 1 CT Sweep1[1] <ADS_Cripps_lib:HB1Tone_LoadPull_GComp:schematic> imag_indexs11=(-818.182e-03->818.182e-03) CT Sweep1[1].Sweep2[1/10] <ADS_Cripps_lib:HB1Tone_LoadPull_GComp:schematic> imag_indexs11=-818.182e-03 real_indexs11=(-374.938e-03->374.938e-03) HB Sweep1[1].Sweep2[1/10].HB1[1/10] <ADS_Cripps_lib:HB1Tone_LoadPull_GComp:schematic> Pt DC convergence is used. Number of tones: 1. Number of frequencies: 6. Number of time samples: 16. Number of HB equations (problem size): 572. Auto mode: on. Convergence mode: Auto. Linear solver: direct. ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0* 4.95973 fA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0* 6.81371 fA 100.0 Numerical noise: 0.000000e+00 mW, -1.000000e+03 dBm Next attempt: 2.828427e-06 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 1.41421 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 2.99281 nA 100.0 Low level gain found: 2.013562e+01, 1.303965e+01 dB Success. Next attempt: 8.485281e-06 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 2.82849 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 23.9435 nA 100.0 Compression = 1.006625e-08 dB, Gain = 1.303965e+01 dB Success. Next attempt: 2.121320e-05 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 6.36402 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 141.43 nA 100.0 Compression = 7.119433e-08 dB, Gain = 1.303965e+01 dB Success. Next attempt: 5.303301e-05 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 15.9099 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 884.155 nA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.2 367.197 pA 100.0 Compression = 6.627847e-07 dB, Gain = 1.303965e+01 dB Success. Next attempt: 1.325825e-04 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 39.7748 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 5.52941 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.2 4.89135 nA 100.0 Compression = 4.148775e-06 dB, Gain = 1.303965e+01 dB Success. Next attempt: 3.314563e-04 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 99.437 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 34.6113 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.2 75.7877 nA 100.0 Compression = 2.593631e-05 dB, Gain = 1.303962e+01 dB Success. Next attempt: 8.286408e-04 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 248.592 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1 217.148 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.2 1.19124 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.3 5.42651 nA 100.0 Compression = 1.621174e-04 dB, Gain = 1.303949e+01 dB Success. Next attempt: 2.071602e-03 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 621.481 uA 100.0 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.1* 621.481 uA 100.0 1.0* 597.282 uA 100.0 2.09485 mV 2.0* 14.5883 nA 100.0 51.953 nV Compression = 1.013586e-03 dB, Gain = 1.303864e+01 dB Success. Next attempt: 5.179005e-03 ------------------------------------------------------------------------------ Newton solver: Iter KCL residual Damp % Sol update ------------------------------------------------------------------------------ 0.0 1.5537 mA 100.0 -----------------------------------------------------------------------