Made by : Yecid Andres Cocoma
Technical Networks
Tel: 317 3312378
Ingreso ATN 910/910I/950B/950C
Putty ATN 910/I: serial com#
speed 38400
Putty ATN 950B: SSH
Ip PC 192.168.0.10
Ip Putty 192.168.0.1
User: root
pass: Changeme_123 Pass: Huawei@123
TIGO UNE ATN 910:
User:root
Pass:&UN3$.05
Commissioning
-sys inicio para comisionamiento de equipo nuevo
-sysname ### ingrea el nenomico asignado al equipo 1.1.1.1/30
-system-view ingresa a la interface del equipo 2.2.2.1/30 sub
-interface giga0/5/0 -->asignar la ip de la OTX
ip address .......
-undo ip address -->borra la ip asignada
-reset saved-configuration para reinico de equipo usado
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y
-reboot fast reinica el equipo de fabrica
Checking the Hardware
-display version >command to view the version information.
-display device pic-status para una información más en detalle del punto anterior, como los
tipos de tarjeta utilizados.
-display device >command to view information about the components installed on the ATN.
-display memory-usage [ slave ] para la visualización de información del uso de memoria de
la controladora activa o standby del equipo.
-display cpu-usage para la visualización de información del uso de CPU de la controladora
activa y display cpu-usage slave para la controladora standby.
-display temperature all para la visualización de información de temperatura de trabajo
todas las boards. Reemplazar ’all’ por ’slot slot-id’, siendo slot-id el número de una
board, si se requiere observar las de una board específica.
-display voltage all para la visualiza
-display controller e1 0/0/0 visualiza el estado de los e1
-display startup >command to view the system software and configuration files for the
current and next startup.
-display health >command to view the health status of the ATN.
-display fan >command to check the fan status.
-display power >command to check the power status.
-display clock >command to view system time.
-display interface brief >command to view brief information about all interfaces on the ATN.
The information includes the physical status, protocol status, latest bandwidth usage in the
inbound or outbound direction, and number of received or transmitted incorrect packets.
-Gigabitethernet0/6/0 has1 neighbor verifica la conexion en el nodo.(ATN950b)
-display alarm all >command to view all alarms on the ATN to determine if faults have
occurred on the ATN.
Checking Ethernet Interfaces
-display interface ethernet brief >command to view the physical status, auto-negotiation
mode, duplex mode, rate, and latest average inbound and outbound bandwidth usage of Ethernet
interfaces.
-display interface gigabitethernet 0/2/0 >command to view the MTU, IP address, mask, rate,
and operation mode of an Ethernet interface.
-ping 192.168.1.2 >command to test Ethernet link connectivity
Checking E-Carrier Interfaces
Made by : Yecid Andres Cocoma
Technical Networks
Tel: 317 3312378
-display controller e1 > command to check the status of a CE1 interface
For example: display controller e1 0/2/0
Checking the Optical Power of Interfaces
-display interface >command to view the operating status and statistics on each of two
connected interfaces
For example: display interface gigabitethernet 0/2/0
Checking the Interface Status
-display interface brief >command to view brief information about all interfaces on the ATN
-display lldp neighbor
sys>lldp enable-->Ac
sys>[bog-eca01-h910-Madrid_6-aaa]local-user gestion password ciph Colombia2019* para cambiar
la contraseña del login
display current interface gi 0/2/16
<BOG_CIU_ARBA_H501_B646>system-view
Enter system view, return user view with Ctrl+Z.
[BOG_CIU_ARBA_H501_B646]interface gi 0/2/1
[BOG_CIU_ARBA_H501_B646-GigabitEthernet0/2/1]undo shutdown
[BOG_CIU_ARBA_H501_B646-GigabitEthernet0/2/1]quit
[BOG_CIU_ARBA_H501_B646]quit
