1
www.harrispaints.com f / harrispaints TDS 2017.05
SPRAY PAINT
High Heat
BBQ Black
Basic Uses: interior/exterior for metal use (resists up to 1500ºF)
TECHNICAL DATA SIZES FINISH COLOR
VISCOSITY: 15-20 KU’s 11 ounce can FLAT Black
FLASH POINT: Less than 156º F
SOLIDS (WEIGHT): 38.21% (varies with colors)
SOLIDS (VOLUME): 23.67% (varies with colors)
DRY FILM THICKNESS:
1.10 mils dry recommende
DRYING TIME: Set to touch in 20 minutes
DESCRIPTION
METHOD OF APPLICATION: Shake
A quick drying interior/exterior enamel can until agitator ball begins to rattle and
that gives flat surface finish. Numerous continue to shake for one min. after.
applications in the home and industry. Occasionally shake during use. Hold can
Ideal for any surface subjected to 12 to 16 inches from surface to be
temperature up to 1200° F (649° C). sprayed and apply several thin coats
rather than one heavy coat. Recoat after
N one hour.
SURFACE PREPARATION: Thoroughly N
clean all grease, oil, dirt, wax and rust
scale from surface before painting. CAUTION! EXTREMELY FLAMMABLE.
NEW METAL SURFACE: KEEP OUT
Surface OFclean,
must be REACH dryOF
andCHILDREN.
free of oil, grease, dirt or rust.
New or rusted areas should be primed Vapors may ignite explosively. Prevents
with Aerosol Primer before painting. buildup vapor. Keep from heat, sparks,
flames or other heat sources. Do not
PREVIOUSLY PAINTED SURFACES: smoke. To avoid breathing vapors or
Make sure surface is free of dirt, grease, spray mist, open windows and doors or
wax and rust scale from surface before use other means to ensure fresh air
painting. Use drop cloth or newspapers entry during application and drying. If you
to protect surrounding areas from spray experience eye watering, headaches or
mist. Surface temperature must be dizziness, increase fresh air or wear
o
above 65 F from painting. Do not paint respiratory protection or leave the area.
in high winds or excessively high
humidity.
SURFACES IN GOOD CONDITIONS:
Spray directly on bare areas. Primers are
not necessary.
SURFACES IN POOR CONDITIONS:
Remove all rust and peeled or blistered
paint to restore back to sound surface.
Then, applied in all surfaces the Gray
Primer allow 30 min. to dry.
