MS5803-14BA Pressure Sensor Hookup Guide
Contributors:
CaseyTheRobot
CaseyTheRobot 
Resources and Going Further
Now that you've successfully got your MS5803-14BA Pressure Sensor up and running, it's time to incorporate it into your own project! For more information, check out the resources below:
- Schematic
- Eagle Files
- Datasheet (MS5803-14BA)
- GitHub
- SFE Product Showcase
Need some inspiration for your next project? Check out some of these related tutorials:
Blynk Board Project Guide
A series of Blynk projects you can set up on the Blynk Board without ever re-programming it.
Qwiic Ambient Light Sensor (VEML6030) Hookup Guide
The VEML6030 is a high accuracy ambient light sensor with 16-bit resolution. This I2C sensor can detect light similar to the human eye response. Start detecting light levels in your environment!
SparkFun Air Quality Sensor - SGP30 (Qwiic) Hookup Guide
A hookup guide to get started with the SparkFun Air Quality Sensor - SGP30 (Qwiic).
Qwiic Digital Indoor Thermometer
Qwiic-ly build a digital indoor thermometer to measure the ambient temperature of the room and display it using an OLED on an I2C bus!
Tip: If you are submerging the sensor in a liquid, try sealing the board in silicone conformal coating while keeping the gel membrane exposed to the medium. Just keep in mind that the antimagnetic stainless steel cap only protects against "30 bar overpressure water resistance" as stated in the datasheet.
If you have any problems or questions, our technical support department can help. Please don't hesitate to contact us. We also love to hear about your projects!