FreeBSD Manual Pages
KPROC(9) Kernel Developer's Manual KPROC(9) NAME kproc_start, kproc_shutdown, kproc_create, kproc_exit, kproc_resume, kproc_suspend, kproc_suspend_check -- kernel processes SYNOPSIS #include <sys/kthread.h> void kproc_start(const void *udata); void kproc_shutdown(void *arg, int howto); int kproc_create(void (*func)(void *), void *arg, struct proc **newpp, int flags, int pages, const char *fmt, ...); void kproc_exit(int ecode); int kproc_resume(struct proc *p); int kproc_suspend(struct proc *p, int timo); void kproc_suspend_check(struct proc *p); int kproc_kthread_add(void (*func)(void *), void *arg, struct proc **procptr, struct thread **tdptr, int flags, int pages, char * procname, const char *fmt, ...); DESCRIPTION In FreeBSD 8.0, the kthread*(9) family of functions was renamed to be the kproc*(9) family of functions, as they were misnamed and actually produced kernel processes. A new family of different kthread_*(9) functions was added to produce real kernel threads. See the kthread(9) man page for more information on those calls. Also note that the kproc_kthread_add(9) function appears in both pages as its functional- ity is split. The function kproc_start() is used to start "internal" daemons such as bufdaemon, pagedaemon, vmdaemon, and the syncer and is intended to be called from SYSINIT(9). The udata argument is actually a pointer to a struct kproc_desc which describes the kernel process that should be created: struct kproc_desc { char *arg0; void (*func)(void); struct proc **global_procpp; }; The structure members are used by kproc_start() as follows: arg0 String to be used for the name of the process. This string will be copied into the p_comm member of the new process' struct proc. func The main function for this kernel process to run. global_procpp A pointer to a struct proc pointer that should be updated to point to the newly created process' process structure. If this variable is NULL, then it is ignored. The kproc_create() function is used to create a kernel process. The new process shares its address space with process 0, the swapper process, and runs in kernel mode only. The func argument specifies the function that the process should execute. The arg argument is an arbi- trary pointer that is passed in as the only argument to func when it is called by the new process. The newpp pointer points to a struct proc pointer that is to be updated to point to the newly created process. If this argument is NULL, then it is ignored. The flags argument spec- ifies a set of flags as described in rfork(2). The pages argument specifies the size of the new kernel process's stack in pages. If 0 is used, the default kernel stack size is allocated. The rest of the ar- guments form a printf(9) argument list that is used to build the name of the new process and is stored in the p_comm member of the new process's struct proc. The kproc_exit() function is used to terminate kernel processes. It should be called by the main function of the kernel process rather than letting the main function return to its caller. The ecode argument specifies the exit status of the process. While exiting, the function exit1(9) will initiate a call to wakeup(9) on the process handle. The kproc_resume(), kproc_suspend(), and kproc_suspend_check() func- tions are used to suspend and resume a kernel process. During the main loop of its execution, a kernel process that wishes to allow itself to be suspended should call kproc_suspend_check() passing in curproc as the only argument. This function checks to see if the kernel process has been asked to suspend. If it has, it will tsleep(9) until it is told to resume. Once it has been told to resume it will return allow- ing execution of the kernel process to continue. The other two func- tions are used to notify a kernel process of a suspend or resume re- quest. The p argument points to the struct proc of the kernel process to suspend or resume. For kproc_suspend(), the timo argument specifies a timeout to wait for the kernel process to acknowledge the suspend re- quest and suspend itself. The kproc_shutdown() function is meant to be registered as a shutdown event for kernel processes that need to be suspended voluntarily during system shutdown so as not to interfere with system shutdown activities. The actual suspension of the kernel process is done with kproc_suspend(). The kproc_kthread_add() function is much like the kproc_create() func- tion above except that if the kproc already exists, then only a new thread (see kthread(9)) is created on the existing process. The func argument specifies the function that the process should execute. The arg argument is an arbitrary pointer that is passed in as the only ar- gument to func when it is called by the new process. The procptr pointer points to a struct proc pointer that is the location to be up- dated with the new proc pointer if a new process is created, or if not NULL, must contain the process pointer for the already existing process. If this argument points to NULL, then a new process is cre- ated and the field updated. If not NULL, the tdptr pointer points to a struct thread pointer that is the location to be updated with the new thread pointer. The flags argument specifies a set of flags as de- scribed in rfork(2). The pages argument specifies the size of the new kernel thread's stack in pages. If 0 is used, the default kernel stack size is allocated. The procname argument is the name the new process should be given if it needs to be created. It is NOT a printf style format specifier but a simple string. The rest of the arguments form a printf(9) argument list that is used to build the name of the new thread and is stored in the td_name member of the new thread's struct thread. RETURN VALUES The kproc_create(), kproc_resume(), and kproc_suspend() functions re- turn zero on success and non-zero on failure. EXAMPLES This example demonstrates the use of a struct kproc_desc and the func- tions kproc_start(), kproc_shutdown(), and kproc_suspend_check() to run the bufdaemon process. static struct proc *bufdaemonproc; static struct kproc_desc buf_kp = { "bufdaemon", buf_daemon, &bufdaemonproc }; SYSINIT(bufdaemon, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &buf_kp) static void buf_daemon() { ... /* * This process needs to be suspended prior to shutdown sync. */ EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, bufdaemonproc, SHUTDOWN_PRI_LAST); ... for (;;) { kproc_suspend_check(bufdaemonproc); ... } } ERRORS The kproc_resume() and kproc_suspend() functions will fail if: [EINVAL] The p argument does not reference a kernel process. The kproc_create() function will fail if: [EAGAIN] The system-imposed limit on the total number of processes under execution would be exceeded. The limit is given by the sysctl(3) MIB variable KERN_MAXPROC. [EINVAL] The RFCFDG flag was specified in the flags parame- ter. SEE ALSO rfork(2), exit1(9), kthread(9), SYSINIT(9), wakeup(9) HISTORY The kproc_start() function first appeared in FreeBSD 2.2. The kproc_shutdown(), kproc_create(), kproc_exit(), kproc_resume(), kproc_suspend(), and kproc_suspend_check() functions were introduced in FreeBSD 4.0. Prior to FreeBSD 5.0, the kproc_shutdown(), kproc_resume(), kproc_suspend(), and kproc_suspend_check() functions were named shutdown_kproc(), resume_kproc(), shutdown_kproc(), and kproc_suspend_loop(), respectively. Originally they had the names kthread_*() but were changed to kproc_*() when real kthreads became available. FreeBSD 14.3 October 19, 2007 KPROC(9)
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUES | EXAMPLES | ERRORS | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=kthread_create&sektion=9&manpath=FreeBSD+14.3-RELEASE+and+Ports>