UC/OS-II 源码下载【资源】

UCOSIIV2.93源码及PORTS和APP移植源码大全（含52种单片机端口移植源程序）。包含：68HC12，78K0，ARM，ARM7，ARM9，ARM-Cortex-A，ARM-Cortex-M，ARM-Cortex-R，AVR，AVR32等52种单片机的端口硬件移植程序。 还包含APP配置源文件。

由于官网访问不到，github没代理加载不出放这里供参考

\SOFTWARE The main directory from the root where all software-related files are placed. \SOFTWARE\BLOCKS The main directory where all ‘Building Blocks’ are located. With μC/OS-II, I included a ‘building block’ that handles DOS-type compatible functions that are used by the example code. \SOFTWARE\BLOCKS\TO This directory contains the files for the TO utility (see Appendix E, TO). The source file is TO.C and is found in the \SOFTWARE\TO\SOURCE directory. The DOS executable file (TO.EXE) is found in the \SOFTWARE\TO\EXE directory. Note that TO requires a file called TO.TBL which must reside on your root directory. An example of TO.TBL is also found in the \SOFTWARE\TO\EXE directory. You will need to move TO.TBL to the root directory if you are to use TO.EXE. \SOFTWARE\uCOS-II The main directory where all μC/OS-II files are located. \SOFTWARE\uCOS-II\EX1_x86L This directory contains the source code for EXAMPLE #1 (see section 1.07, Example #1) which is intended to run under DOS (or a DOS window under Windows 95). \SOFTWARE\uCOS-II\EX2_x86L This directory contains the source code for EXAMPLE #2 (see section 1.08, Example #2) which is intended to run under DOS (or a DOS window under Windows 95). \SOFTWARE\uCOS-II\EX3_x86L This directory contains the source code for EXAMPLE #3 (see section 1.09, Example #3) which is intended to run under DOS (or a DOS window under Windows 95). \SOFTWARE\uCOS-II\Ix86L This directory contains the source code for the processor dependent code (a.k.a. the port) of μC/OS-II for an 80x86 Real-Mode, Large Model processor. \SOFTWARE\uCOS-II\SOURCE This directory contains the source code for processor independent portion of μC/OS-II. This code is fully portable to other processor architectures.

uCOS-II是Micrium公司开发的一款嵌入式实时操作系统，之前学习时在官网下载好了相关代码的评估版，为了方便大家下载，在此分享给大家，作为学习使用。压缩包里分两部分即源码和例程，源码部分包含uCOS-II和uCOS-III的源码（不含port等文件夹，是移植时不需修改的源文件，版本：ucos-ii的v2.86和目前最新的v2.91、ucos-iii的v3.03），例程部分包含完整目录文件夹，有：stm32f103ze(ucos-iiv2.86)、stm32f107(ucos-ii-v2.92)、stm32f2xxx(ucos-iii)、TI的DSP28335(ucos-ii-v2.92)等

还包含在PC上运行的移植范例和borland

该内核文件已经修改过，可在Cortex-M3内核的单片机中直接使用

从官网上下载的源码从官网上下载的源码从官网上下载的源码从官网上下载的源码从官网上下载的源码从官网上下载的源码从官网上下载的源码

uCOSII源代码uCOSII源代码uCOSII源代码uCOSII源代码

《深入剖析uC/OS-II：嵌入式操作系统源码...uc/OS-II 的源码是一个宝贵的教育资源，值得每一位嵌入式开发者投入时间和精力去研究。通过学习，我们可以掌握RTOS的核心机制，为自己的项目带来更高效、可靠的解决方案。

《深入剖析uC/OS-II实时嵌入式操作系统源码》 uC/OS-II，全称为MicroC/OS-II，是一款著名的、广泛应用的实时嵌入式操作系统（RTOS）。它以其小巧、高效、可移植性强和良好的实时性能，在嵌入式开发领域享有较高的...

《深入解析UC/OS-II：基于时间片轮转调度的源码分析》 UC/OS-II，全称为“microC/OS-II”，是一款广泛应用的实时操作系统（RTOS），它以其高效、小巧、稳定的特点深受嵌入式开发者的喜爱。在UC/OS-II中，时间片轮转...