esp32c3和st7789获取天气时钟
时间: 2025-06-07 19:10:07 浏览: 40
### 实现ESP32-C3和ST7789的天气与时钟功能
为了实现基于ESP32-C3和ST7789屏幕的天气与时间显示功能,可以按照以下方法设计开发方案并提供相应的代码示例。
#### 1. 硬件连接
ESP32-C3模块可以通过SPI接口驱动ST7789屏幕。具体接线方式如下表所示:
| ESP32-C3 Pin | ST7789 Pin |
|--------------|------------|
| GPIO6 | MOSI |
| GPIO7 | SCLK |
| GPIO8 | CS |
| GPIO9 | DC |
| GPIO10 | RST |
确保电源电压匹配(通常为3.3V),并将GND引脚相连[^1]。
#### 2. 软件环境配置
使用Arduino IDE进行开发前,需安装以下库文件:
- **Adafruit_ST7789**: 提供对ST7789屏幕的支持。
- **WiFiClientSecure**: 支持HTTPS请求以获取天气数据。
- **NTPClient**: 获取当前时间用于时钟同步。
可以在Arduino库管理器中搜索并安装上述库。
#### 3. 示例代码
以下是完整的代码示例,展示如何通过ESP32-C3从互联网获取时间和天气信息,并将其显示在ST7789屏幕上。
```cpp
#include <WiFi.h>
#include <HTTPClient.h>
#include <time.h>
#include <NTPClient.h>
#include <WiFiUdp.h>
#include <Adafruit_GFX.h>
#include <Adafruit_ST7789.h>
// 定义屏幕参数
#define TFT_CS 8
#define TFT_DC 9
#define TFT_RST 10
#define TFT_MOSI 6
#define TFT_SCLK 7
// 初始化屏幕对象
Adafruit_ST7789 tft = Adafruit_ST7789(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCLK, TFT_RST);
// WiFi设置
const char* ssid = "YourSSID";
const char* password = "YourPassword";
// NTP客户端初始化
WiFiUDP ntpUDP;
NTPClient timeClient(ntpUDP, "pool.ntp.org", 0, 60000);
void setup() {
Serial.begin(115200);
// 连接到Wi-Fi网络
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi");
// 同步时间
timeClient.begin();
timeClient.update();
// 初始化TFT屏幕
tft.init(240, 320); // 设置分辨率
tft.setRotation(1); // 屏幕方向调整
}
void loop() {
updateTime(); // 更新时间
updateWeather(); // 更新天气
displayInfo(); // 显示信息
delay(60000); // 每分钟刷新一次
}
void updateTime() {
struct tm timeinfo;
getLocalTime(&timeinfo);
String currentTime = String(timeinfo.tm_hour) + ":" +
String(timeinfo.tm_min) + ":" +
String(timeinfo.tm_sec);
Serial.print("Current Time: ");
Serial.println(currentTime);
}
void updateWeather() {
HTTPClient http;
// 发送GET请求至OpenWeatherMap API
const char* host = "api.openweathermap.org";
String url = "/data/2.5/weather?q=CityName&appid=YourAPIKey&units=metric";
if (!http.begin(host, 80)) {
Serial.println("Failed to connect");
return;
}
int httpResponseCode = http.GET();
if (httpResponseCode > 0) {
String payload = http.getString();
Serial.println(payload);
// 解析JSON响应中的温度和其他字段
DynamicJsonDocument doc(1024);
deserializeJson(doc, payload);
float temperature = doc["main"]["temp"];
String weatherDescription = doc["weather"][0]["description"];
Serial.print("Temperature: ");
Serial.println(temperature);
Serial.print("Weather Description: ");
Serial.println(weatherDescription);
} else {
Serial.printf("Error on sending GET request: %d\n", httpResponseCode);
}
http.end();
}
void displayInfo() {
tft.fillScreen(ST77XX_BLACK); // 清屏
tft.setTextColor(ST77XX_WHITE); // 文字颜色设为白色
struct tm timeinfo;
getLocalTime(&timeinfo);
String clockText = String(timeinfo.tm_hour) + ":" +
String(timeinfo.tm_min);
tft.setTextSize(4); // 字体大小放大
tft.setCursor(50, 50); // 设定文字位置
tft.println(clockText); // 打印时间
tft.setTextSize(2); // 减小字体大小
tft.setCursor(10, 200); // 新的位置
tft.println("Temp: "); // 添加其他信息占位符
}
```
此代码实现了基本的时间和天气数据显示功能[^2]。
---
###
阅读全文
相关推荐
















