#define RX_BUF_MAX_LEN 1024 //最大字节数 extern struct STRUCT_USART_Fram //数据帧结构体 { char Data_RX_BUF[RX_BUF_MAX_LEN]; union { __IO u16 InfAll; struct { __IO u16 FramLength :15; // 14:0 __IO u16 FramFinishFlag :1; // 15 }InfBit; }; }ESP8266_Fram_Record_Struct; bool ESP8266_Send_AT_Cmd(char *cmd,char *ack1,char *ack2,u32 time) { ESP8266_Fram_Record_Struct .InfBit .FramLength = 0; //重新接收新的数据包 ESP8266_USART("%s\r\n", cmd); if(ack1==0&&ack2==0) //不需要接收数据 { return true; } delay_ms(time); //延时 delay_ms(1000); ESP8266_Fram_Record_Struct.Data_RX_BUF[ESP8266_Fram_Record_Struct.InfBit.FramLength ] = '\0'; printf("%s",ESP8266_Fram_Record_Struct .Data_RX_BUF); if(ack1!=0&&ack2!=0) { return ( ( bool ) strstr ( ESP8266_Fram_Record_Struct .Data_RX_BUF, ack1 ) || ( bool ) strstr ( ESP8266_Fram_Record_Struct .Data_RX_BUF, ack2 ) ); } else if( ack1 != 0 ) //strstr(s1,s2);检测s2是否为s1的一部分，是返回该位置，否则返回false，它强制转换为bool类型了 return ( ( bool ) strstr ( ESP8266_Fram_Record_Struct .Data_RX_BUF, ack1 ) ); else return ( ( bool ) strstr ( ESP8266_Fram_Record_Struct .Data_RX_BUF, ack2 ) ); } 这里的数组溢出了怎么解决