写一个程序,用esp32-wroom作为主控芯片,micropython语言作为编写语言,用ubluetooth蓝牙库,手机连接esp32蓝牙后,gpio13输出高电平,蓝牙断开连接后,gpio13输出低电平
时间: 2024-12-16 14:25:40 浏览: 142
在Micropython环境下,ESP32-WROOM作为主控芯片,可以利用其内置的蓝牙功能并通过`ubluetooth`库来实现手机连接蓝牙后GPIO13的状态切换。下面是一个简化的示例程序:
```python
import machine
from ubluetooth import Bluetooth
# 初始化GPIO13为输出模式
led = machine.Pin(13, machine.Pin.OUT)
# 创建蓝牙对象
bluetooth = Bluetooth()
def connect_handler():
print("已连接到蓝牙")
led.high() # 当连接成功,GPIO13输出高电平
def disconnect_handler():
print("蓝牙已断开连接")
led.low() # 蓝牙断开后,GPIO13输出低电平
# 检查是否已经配对并连接
if bluetooth.is_connected():
connect_handler()
else:
# 设置回调函数,当连接状态变化时触发
bluetooth.event(handle=bluetooth.EVT_CONNECTED, callback=connect_handler)
bluetooth.event(handle=bluetooth.EVT_DISCONNECTED, callback=disconnect_handler)
# 开始扫描设备
bluetooth.start_scan(timeout=5) # 扫描5秒
while True:
if not bluetooth.scan_active(): # 如果扫描结束
break
# 等待连接请求
while not bluetooth.is_connected():
device = bluetooth.find_device(name="手机名称") # 替换为你的设备名称
if device is not None:
print(f"连接到 {device.name}")
bluetooth.connect(device.address) # 连接设备
```
请注意,这个示例假设您的手机已经在蓝牙列表中设置了特定的名称,并且ESP32需要配置为发起连接。在实际应用中,您还需要处理异常和错误情况,以及设置合适的蓝牙配对密码。
阅读全文
相关推荐



















