Link-Layer Header Type in Wireshark

Link-Layer Header Type in Wireshark

Last Updated : 15 Sep, 2022

Frames are the units of communication in the data link layer. The packets from the network layer are sent to the link layer, where it gets encapsulated into frames. If the size of the frame is too large, then the frames are further divided and then send to the receiver. At the receiver’s end, the hardware picks up the signal and constructs them into frames.

The frame formed from the packets has a Frame Header that contains the source and the destination addresses of the frame and the control bytes.

Ethernet Frame Format

In Wireshark, the link layer is only interested in getting a frame to the next adjacent node on the physical medium. The main thing is the Organizational Unique Identifier (OUI), which is the first three bytes of any Ethernet address.

WiFi Network Scan

There is not necessarily a need to modify the link-layer header type in Wireshark. But in some cases, it can be modified. The exceptions are as follows:

If the device is connected to Ethernet(802.3) we might get an offer to choose either Ethernet or DOCSIS. If the device is using a Cisco Cable Modem Termination System that is putting DOCSIS traffic onto the Ethernet, decide “DOCSIS”, otherwise decide “Ethernet”.
If the device is connected to an 802.11, we might get an offer to decide between Ethernet or 802.11. Ethernet will generate captured packets that have fake Ethernet headers. The packets having fake Ethernet headers will be generated by Ethernet and IEEE(802.11) headers will be generated by 802.11. If the application wants to read the packets but doesn't support the 802.11 headers, then decide on Ethernet.

Link-Layer Header Type in Wireshark

kaalel

Improve

Article Tags :

Similar Reads

HART-IP in Wireshark

Wireshark is a packet sniffing and free open-source packet analysis tool. It captures network traffic on the local network and stores this data and displays the captured data for offline analysis. Wireshark captures network traffic from various sources such as Ethernet, Bluetooth, wireless fidelity,

IKEv2 Decryption Table in Wireshark

In this information era, each and every organization whether small or big wants to expand using digital platforms, but the main concern is the security and safety of customers' data. Transactions can only be secured if the network is properly configured with authentication and authorization features

What are File Sets in Wireshark ?

File Sets in Wireshark are a way to discover, filter, and process traffic. They help you to better organize your captured data and analyze the information for a specific type of file or protocol. This is an indispensable tool for fast and efficient analysis. Wireshark's File Sets are based on Common

IP Filtering in Wireshark

Wireshark is a network packet analyzer or tracer. Network Packet Analyzer displays captured packet data in as much detail as possible. It is a popular open-source network protocol analyzer used by ethical hackers to analyze network traffic to identify vulnerabilities or potential security breaches.

How to Define And Save Filters in Wireshark?

Defining and saving filters is a way to create shortcuts for complex display filters in Wireshark. We can create pre-defined filters that appear in the capture and display filter bookmark menus. We can define a filter in Wireshark and tag it to use later. This saves time in recalling and writing som

Packet Lengths in Wireshark

The Packet Length determines the size of the whole packet including the header, trailer, and the data that has been sent on that packet. The packet length is actually the size of the captured frame. The size of the packet determines the size of the header on the packet. In Wireshark, packet lengths

Object Identifiers in Wireshark

Object Identifiers (OIDs) are used by several ASN.1 protocol to specifically identify specific items of data. They are constantly used as an extension method, allowing the description of new object identifiers (and their corresponding values) without altering the base standard. Although Wireshark is

Steps of Filtering While Capturing in Wireshark

Prerequisite: Wireshark â€“ Packet Capturing and Analyzing Wireshark is a network protocol analyzer that captures packets from a network connection. It is a software tool used to monitor network traffic through a network interface. Wireshark can limit packet capture by capturing only those packets tha

Sametime in Wireshark

Research found that around 86 percent of vulnerabilities are found in the full stack development sector. Hence, there is an utmost need to cope with these to make platforms secure. One of the common attack point is network because every single byte is transferred through the network hence attackers

Resolved Addresses in Wireshark

Wireshark is a popular network tool that lets people see the traffic on the wire.In order to capture all of your data, you will need to open up your computer or laptop and plug it into a wired or wireless LAN (local area network) so Wireshark can get an image of that traffic. Resolved Addresses:Reso