std::set_difference in C++
Last Updated :
12 Jul, 2024
The difference of two sets is formed by the elements that are present in the first set, but not in the second one. The elements copied by the function come always from the first range, in the same order. The elements in the both the ranges shall already be ordered.
1. Comparing elements using “<“:
Syntax :
Template :
OutputIterator set_difference (InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2,
OutputIterator result);
Parameters :
first1, last1
Input iterators to the initial and final positions of the first
sorted sequence. The range used is [first1, last1), which contains
all the elements between first1 and last1, including the element
pointed by first1 but not the element pointed by last1.
first2, last2
Input iterators to the initial and final positions of the second
sorted sequence. The range used is [first2, last2).
result
Output iterator to the initial position of the range where the
resulting sequence is stored.
The pointed type shall support being assigned the value of an
element from the first range.
Return Type :
An iterator to the end of the constructed range.
CPP
// CPP program to illustrate
// std :: set_difference
#include <bits/stdc++.h>
int main()
{
int first[] = { 5, 10, 15, 20, 25 };
int second[] = { 50, 40, 30, 20, 10 };
int n = sizeof(first) / sizeof(first[0]);
std::vector<int> v2(5);
std::vector<int>::iterator it, ls;
std::sort(first, first + 5);
std::sort(second, second + 5);
// Print elements
std::cout << "First array :";
for (int i = 0; i < n; i++)
std::cout << " " << first[i];
std::cout << "\n";
// Print elements
std::cout << "Second array :";
for (int i = 0; i < n; i++)
std::cout << " " << second[i];
std::cout << "\n\n";
// using default comparison
/* first array intersection second array */
ls = std::set_difference(first, first + 5, second, second + 5, v2.begin());
std::cout << "Using default comparison, \n";
std::cout << "The difference has " << (ls - v2.begin()) << " elements :";
for (it = v2.begin(); it < ls; ++it)
std::cout << " " << *it;
std::cout << "\n";
return 0;
}
Output:
First array : 5 10 15 20 25
Second array : 10 20 30 40 50
Using default comparison,
The difference has 3 elements : 5 15 25
2. By comparing using a pre-defined function:
Template :
OutputIterator set_difference (InputIterator1 first1, InputIterator1 last1,
InputIterator2 first2, InputIterator2 last2,
OutputIterator result, Compare comp);
Parameters :
first1, last1, first2, last2, result are same as above.
comp
Binary function that accepts two arguments of the types pointed
by the input iterators, and returns a value convertible to bool.
The function shall not modify any of its arguments.
This can either be a function pointer or a function object.
Return Type :
An iterator to the end of the constructed range.
CPP
// CPP program to illustrate
// std :: set_difference
#include <bits/stdc++.h>
bool comp(int i, int j)
{
return (i < j);
}
int main()
{
int first[] = { 50, 40, 30, 20, 10 };
int second[] = { 5, 10, 15, 20, 25 };
int n = sizeof(first) / sizeof(first[0]);
std::vector<int> v1(5);
std::sort(first, first + 5);
std::sort(second, second + 5);
// Print elements
std::cout << "First array :";
for (int i = 0; i < n; i++)
std::cout << " " << first[i];
std::cout << "\n";
// Print elements
std::cout << "Second array :";
for (int i = 0; i < n; i++)
std::cout << " " << second[i];
std::cout << "\n\n";
// using custom comparison, function as comp
/* first array intersection second array */
ls = std::set_difference(second, second + 5, first, first + 5, v1.begin(), comp);
std::cout << "Using custom comparison, \n";
std::cout << "The difference has " << (ls - v1.begin()) << " elements :";
for (it = v1.begin(); it < ls; ++it)
std::cout << " " << *it;
std::cout << "\n";
return 0;
}
Output:
First array : 10 20 30 40 50
Second array : 5 10 15 20 25
Using custom comparison :
The difference has 3 elements : 30 40 50
Possible Application : It is used to find the elements that are present only in first list and not in the second list. 1. It can be used to find the list of students that are attending only first classes.
CPP
// CPP program to demonstrate use of
// std :: set_difference
#include <iostream>
#include <algorithm>
#include <vector>
#include <string>
using namespace std;
// Driver code
int main()
{
string first[] = { "Sachin", "Rakesh", "Sandeep", "Serena" };
string second[] = { "Vaibhav", "Sandeep", "Rakesh", "Neha" };
int n = sizeof(first) / sizeof(first[0]);
// Print students of first list
cout << "Students in first class :";
for (int i = 0; i < n; i++)
cout << " " << first[i];
cout << "\n";
// Print students of second list
cout << "Students in second class :";
for (int i = 0; i < n; i++)
cout << " " << second[i];
cout << "\n\n";
vector<string> v(10);
vector<string>::iterator it, st;
// Sorting both the list
sort(first, first + n);
sort(second, second + n);
// Using default operator<
it = set_difference(first, first + n, second, second + n, v.begin());
cout << "Students attending first class only are :\n";
for (st = v.begin(); st != it; ++st)
cout << ' ' << *st;
cout << '\n';
return 0;
}
OUTPUT :
Students in first class : Sachin Rakesh Sandeep Serena
Students in second class : Vaibhav Sandeep Rakesh Neha
Students attending first classes only are :
Sachin Serena
2. It can also be use to find the elements that are not present in first list only. Program is given above.
Similar Reads
std::adjacent_difference in C++
Compute adjacent difference of range Assigns to every element in the range starting at result, the difference between its corresponding element in the range [first, last] and the one preceding it (except for *result, which is assigned *first). If x represents an element in [first, last] and y repres
5 min read
set::erase in C++ STL
In C++, the std::set::erase() is a built-in member function of std::set container that is used to remove the element(s) from the container. In this article, we will learn how we can use set::erase() function in our C++ program. The set::erase() can be used in different ways to erase element(s) from
3 min read
std::set_intersection in C++
The intersection of two sets is formed only by the elements that are present in both sets. The elements copied by the function come always from the first range, in the same order. The elements in the both the ranges shall already be ordered.Examples: Input : 5 10 15 20 25 50 40 30 20 10 Output : The
5 min read
set::emplace() in C++ STL
Sets are a type of associative containers in which each element has to be unique, because the value of the element identifies it. The value of the element cannot be modified once it is added to the set, though it is possible to remove and add the modified value of that element. set::emplace() This f
4 min read
std::distance in C++
The std::distance() in C++ STL is a built-in function used to calculate the number of elements between two iterators. It is defined inside <iterator> header file. In this article, we will learn about the std::distance function in C++ with examples. Example: [GFGTABS] C++ // C++ Program to illu
5 min read
set::clear in C++ STL
Sets are a type of associative containers in which each element has to be unique, because the value of the element identifies it. The value of the element cannot be modified once it is added to the set, though it is possible to remove and add the modified value of that element. set::clear() clear()
2 min read
set_symmetric_difference in C++ with Examples
Symmetric difference of two sorted ranges The symmetric difference between two sets is formed by the elements that are present in one of the sets, but not in the other. Among the equivalent elements in each range, those discarded are those that appear before in the existent order before the call. Th
6 min read
std::minus in C++
Binary function object class whose call returns the result of subtracting its second argument from its first argument (as returned by the binary operator -). Syntax : template struct minus : binary_function { T operator() (const T& x, const T& y) const {return x-y;} }; Template parameters :
2 min read
set find() Function in C++ STL
The std::set::find() is a built-in function in C++ STL that is used to find an element in the set container. It is a member function of std::set container so we can use it directly with any set object. Syntax set_name.find(key) Parameterskey: The element which we have to find.Return ValueIf the elem
2 min read
Pair with the given difference
Given an unsorted array and an integer x, the task is to find if there exists a pair of elements in the array whose absolute difference is x. Examples: Input: arr[] = [5, 20, 3, 2, 50, 80], x = 78Output: YesExplanation: The pair is {2, 80}. Input: arr[] = [90, 70, 20, 80, 50], x = 45Output: NoExplan
14 min read