7 Methods to Fix the WHEA Uncorrectable Error on Windows 10/11

The WHEA Uncorrectable Error is a common Blue Screen of Death (BSOD) that typically signals a hardware-related issue on your Windows 10 or 11 system. WHEA stands for Windows Hardware Error Architecture, and this error often points to problems such as hardware failures, driver issues, or corrupted system files. If you've encountered this error, it's essential to troubleshoot and resolve the underlying causes to prevent further system instability.

In this guide, we’ll walk you through 7 methods to fix the WHEA Uncorrectable Error on Windows 10/11 and get your system back to running smoothly.

Quick Highlights over WHEA Windows Error:

• WHEA Error is related to Hardware Malfunction which is termed as Uncorrectable.
• The WHEA Error comes up with the Error Code 0x0000124.
• The error can occur due to issues in the Hardware like CPU, GPU, RAM, etc.
• Due to the Overclocking of the System, Increased Voltage and Current can be a problem.
• Corrupted Driver have always been a common cause of the WHEA Issue.

How to Fix WHEA Uncorrectable Error on Windows?

To Remove Uncorrectable WHEA Windows Error, the following methods should be executed. Let us start by replacing the Hardware Components after removing them.

Method 1: Resolve WHEA Uncorrectable Error by Checking Hardware Components

One of the simplest ways to resolve WHEA Windows Error is to check the Hardware Components of the device. Open up your CPU Cabinet & locate the Hardware Components like RAM, GPU, Memory Slot etc. You have to perform a simple operation. Check out each component from the device and wait for a few minutes.

Now, again replace the item to its particular position. It will restart the component on the device. If the component gets loosed on the CPU Cabinet, the issue will also be resolved. Restart the device to check whether the WHEA Windows Issue is resolved or not.

Congratulation! You have fixed Windows WHEA Uncorrectable Error without performing any major operation.

Method 2: Resolve WHEA Uncorrectable Error by Checking Disk Health

Step 1: Open the Command Prompt by searching it in the Search Bar. Now, execute it in the Administrative Format.

Step 2: Execute the following command. It will check the Disk and Drivers Health on the device. And fix it quickly if there is any issue persists.

Command: chkdsk C: /f

Hence, you have successfully resolved the WHEA Windows Uncorrectable Issue on your Windows 10 OS.

Method 3: Resolve WHEA Uncorrectable Error by Checking Windows Update History

Step 1: Open Settings & click on the Windows Update option.

Step 2: You will find the Update History option. Go for it & check whether all the updates are installed correctly or not.

So, install all the Falty Windows Update and get rid of the WHEA Windows 10 Error using the Windows Update History.

Method 4: Resolve WHEA Uncorrectable Error by Checking RAM Health

Note: To execute this step, you need to have any third-party application installed on your device. There are a lot of third-party applications are present that will have a look at your computer hardware free of cost.

Step 1: While Starting Up your device, press the F2 Key multiple times to enter into the BIOS Settings. And if you have a third-party application, it will be under that section. Wait until it redirects you to the Diagnostic Page.

Step 2: In that window, you will see all the Reports of Hardware. It will also show the performance of the CPU along with RAM.

Hence, you have got the report of the RAM Execution Status of your device which depicts the reason for the WHEA Error of Windows.

Method 5: Resolve WHEA Uncorrectable Error by Resetting CPU Overclocking

Step 1: Search for Power Settings & go for the Additional Power Settings Option.

Step 2: Under High Performance, click on Change Plan Settings.

Step 3: Reduced the Minimum Processor State to 99 or less by expanding the Processor Power Management. Now, Click OK.

Congratulation! You have successfully reset the CPU Overclocking using the Power Management Settings.

Method 6: Resolve WHEA Uncorrectable Error by Updating BIOS

Step 1: Insert one USB Drive into your device. Right-click on it to Format the USB Driver. It will erase every data of the USB Driver. Now, put the latest version of BIOS in USB as per the Motherboard of your device.

Step 2: Restart the computer and while restarting insert the USB Driver there. Click on the Q-Flash option present there.

Step 3: Go for the Update BIOS From Driver option.

Hence, we have successfully updated the BIOS Driver to remove the WHEA Windows Problem.

Method 7: Resolve WHEA Uncorrectable Error by Reseting Windows 10

Step 1: Find the Settings option & right-click on the App Settings option.

Step 2: Scroll down to find out Reset option. Click on the Reset to complete the process.

By following these seven methods, you can effectively fix the WHEA Uncorrectable Error on Windows 10/11 and prevent further blue screen crashes. Whether the issue lies in your hardware, drivers, or system files, resolving the error ensures better system performance and stability. Regular hardware maintenance and updated drivers will also help avoid similar errors in the future.

Also Read

• How to Upgrade From Windows 10 to Windows 11 For Free?
• How to Fix Right-Click Not Working in Windows 11?
• Troubleshooting Copy and Paste on Windows 10!