Scribd
Upload
256 views1 page

GFG-8210 Data Sheet

The document summarizes the features and specifications of the GFG-8210 10MHz function generator. It can generate sine, triangle, square, ramp, TTL, and CMOS waveforms from 0.1Hz to 10MHz. It has a variable DC offset control, attenuator, external voltage controlled frequency input, and duty cycle control. The generator has a 6 digit LED display and can sweep frequency in linear or logarithmic modes from 0.5 seconds to 30 seconds. It is powered by AC 115V/230V and measures 251x91x291mm.

Uploaded by

injector1
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
256 views1 page

GFG-8210 Data Sheet

The document summarizes the features and specifications of the GFG-8210 10MHz function generator. It can generate sine, triangle, square, ramp, TTL, and CMOS waveforms from 0.1Hz to 10MHz. It has a variable DC offset control, attenuator, external voltage controlled frequency input, and duty cycle control. The generator has a 6 digit LED display and can sweep frequency in linear or logarithmic modes from 0.5 seconds to 30 seconds. It is powered by AC 115V/230V and measures 251x91x291mm.

Uploaded by

injector1
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

B9

Function Generator

FEATURES
* Frequency Range: 0.1Hz ~ 10MHz * Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS Output * External Voltage Controlled Frequency (VCF) Function * Duty Cycle Control with Signal Inversion Capability * Variable DC Offset Control * Two-Step (-20dBx2) and Variable Attenuator * Built-In 6 Digit Counter with INT/EXT Function Up to 150MHz / High Resolution * LIN/LOG Sweep Mode

GFG-8210 (10MHz)
SPECIFICATIONS
MAIN Frequency Range Amplitude Impedance Attenuator DC Offset Duty Control Display SINE WAVE Distortion Flatness TRIANGLE WAVE Linear SQUARE WAVE Symmetry Rise or Fall Time CMOS OUTPUT Max. Frequency Level Rise or Fall Time TTL OUTPUT Level Rise or Fall Time VCF Input Voltage Input Impedance SWEEP OPERATION Sweep/Manual Sweep/Rate Sweep/Time Sweep/Mode Sweep/Out 0.1Hz ~ 10MHz (8 Range) POWER SOURCE + AC115V/230V _ 15%, 50 / 60Hz ACCESSORIES Instruction manual x 1, Power cord x 1 , GTL-101 x 2 DIMENSIONS & WEIGHT 251(W) x 91(H) x 291(D)mm, Approx. 2.2 kg

> 10Vpp (into 50W load) _ + 50W _ 10% + -20dB _ 1dBx2

<-5V ~ >5V (into 50W load) 15% : 85% : 15% ~ 1MHz Continue variable (square wave only) 6 digit LED display 1% typical _ _ + 0.45dB (+ 5%)

ORDERING INFORMATION
GFG-8210
10MHz Function Generator

_ > 98% to 100kHz _ + 2%, 1Hz ~ 100kHz < 35nS _


2MHz _ < 4Vpp ~ 14.5Vpp + 0.5Vpp adjustable _ _ < 120nS

_ > 3Vpp _ < 20nS


0V ~ 10V (100 : 1) _ 10kW + 10% Switch selector >100 : 1 ratio max. and adjustable 0.5sec. ~ 30sec. adjustable Lin./Log. switch selector _ 0V ~ 10 + 1V

FREQUENCY COUNTER INT./EXT. Switch selector 0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.) Range _ Time base accuracy + 1 count Accuracy _ _ + 20ppm(23 C + 5 C)after 30 minutes warm up Time Base Resolution The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz Input Impedance 1MW // 150pF

You might also like