Scribd
Upload
317 views2 pages

RV Design of Column Base Plate

Column Dimension HS203x203x9 Specified compressive strength of concrete Specified minimum yield strength of steel Total factored column load Design bearing strength (CSA A23. Cl. 10.8) Area of base plate ( ( ) 0. 140271 mm2 Base Plate Dimension Using square base plate, [?] [?] Use Solve for m or n (c)rogervino.com Thickness of Plate (whichever of the result of the following formula is greater from the following formula

Uploaded by

api-190618655
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
317 views2 pages

RV Design of Column Base Plate

Column Dimension HS203x203x9 Specified compressive strength of concrete Specified minimum yield strength of steel Total factored column load Design bearing strength (CSA A23. Cl. 10.8) Area of base plate ( ( ) 0. 140271 mm2 Base Plate Dimension Using square base plate, [?] [?] Use Solve for m or n (c)rogervino.com Thickness of Plate (whichever of the result of the following formula is greater from the following formula

Uploaded by

api-190618655
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN OF COLUMN BASE PLATE (CISC) Column Dimension

HS203x203x9.5

Depth Width

d = 203.2 mm b = 203.2 mm mm

Thickness t= 9.53

Material Properties Resistance factor for concrete Specified compressive strength of concrete Specified minimum yield strength of steel Total factored column load Design bearing strength (CSA A23.3 cl. 10.8) Area of base plate ( ( ) ) 0.65

20 300 1550

MPa MPa kN

140271 mm2
Base Plate Dimension Using square base plate, Use Solve for m or n

374.53 mm
mm ) ( )

380
(

93.17

rogervino.com

Thickness of Plate (whichever of the result is greater from the following formula)

( (

) )( ) mm mm

26
say use To minimize deflection: Check for overhang limit (p.4-148) Limit 1/5th overhang (

15

)= 18.63

mm

<
Therefore us PL325mm x 325mm x 25mm base plate

Plate thickness is sufficient

rogervino.com

You might also like