5360 SSINA Format

6/14/01

10:01 AM

Page 17

DESIGNER

HANDBOOK

PECIFICATIONS

FOR
STAINLESS
STEEL

Stainless
Steel
The
Value
Option

5360 SSINA Format

6/12/01

3:05 PM

Page 2

Table of Contents
Introduction ...........................................1
Acknowledgement.................................1
General Information ...............................1
Stainless Steel Specifications .................2
Standard Specification .......................2
Standard Practices.............................3
Standard Test Methods......................3
Specifications by Mill Shape ..................3
Bar ...................................................3
Castings.............................................3
Forgings ............................................4
Pipe ...................................................4
Plate, Sheet and Strip ........................4
Tube ..................................................4
Mechanical Tubing ............................5
Wire & Wire Rod ................................5
Specifications by Product .....................5
Bearings ............................................5
Bolts & Nuts .......................................5
Pipe Fittings .......................................5
Fittings, Flanges & Valves ..................5
Fasteners ...........................................5
Specifications by Grade Type...........6-12

The Specialty Steel Industry of North

America (SSINA) and the individual companies it represents have made every
effort to ensure that the information presented in this handbook is technically
correct. However, neither the SSINA nor
its member companies warrants the
accuracy of the information contained in
this handbook or its suitability for any
general and specific use. The SSINA
assumes no liability or responsibility of
any kind in connection with the use of
this information. The reader is advised
that the material contained herein should
not be used or relied on for any specific
or general applications without first
securing competent advice.
8/95

5360 SSINA Format

6/12/01

3:05 PM

Page 3

INTRODUCTION
This designer handbook has been written to provide the designer,
engineer, specification writer, producer and user of STAINLESS STEEL
with a listing of all the current ASTM (American Society for Testing and
Materials) standards. These standards are listed by mill shape (BAR,
SHEET, WIRE, etc.) and by product (bolts, fittings). Stainless types are
also listed, along with a selection of applicable society, government
and military specifications.

ACKNOWLEDGEMENT
An original version was initially published by the Committee of
Stainless Steel Producers, American Iron and Steel Institute (AISI),
Washington, D.C., and was used, with thanks, as a basis for this
updated handbook.
The 1995 Annual Book of ASTM Standards, section 1 was used as
the reference base for listed ASTM specifications.

GENERAL INFORMATION
Stainless steel is not a single alloy, but rather the name applies to a
group of iron based alloys containing a minimum of 10.5% chromium.
Other elements are added and the chromium content increased to
improve corrosion resistance and/or enhance mechanical properties.
There are over 50 stainless steel grades, originally recognized by the
AISI and are detailed in a designer handbook, Design Guidelines for
the Selection and Use of Stainless Steel, available from the Specialty
Steel Industry of North America (SSINA).
The assumption is made that the reader is well aware of the various
types of stainless steels including the five metallurgical classifications
(austenitic, ferritic, martensitic, austenitic/ferritic-or-duplex, and
precipitation hardening). Where possible, these five classifications are
generally shown with austenitic first. In some cases the ASTM
reference is to the content rather than the classification. In those cases
the basic content is listed (i.e., iron-chromium-nickel).
With certain mill products, there is a general requirement
specifications and when that is the case, it is listed first with all the
applicable specifications listed below it. The symbols ***** mark the
end of these applicable specifications.
Specifications by grade are listed by the grades generally in use and
do not cover all the stainless steel grades that are available. This listing
applies mainly to mill products.

5360 SSINA Format

6/12/01

3:05 PM

Page 4

STAINLESS STEEL SPECIFICATIONS

(NUMERICAL LISTING)
STANDARD SPECIFICATIONS FOR:
Specification Product Reference
ASTM A
(Note: M designations have been left off)
167....................Plate, Sheet, Strip (chromium-nickel)
176....................Plate, Sheet, Strip (chromium)
177....................Sheet, Strip (chromium-nickel) Note: Replaced
by A666
182....................Forged Flanges, Fittings, Valves
193....................Bolts
194....................Nuts
213....................Heat Exchanger Tubes
217....................Castings
240....................Plate, Sheet, Strip for Pressure Vessels
249....................Heat Exchangers & Condenser Tubes
263....................Clad Plate, Sheet and Strip (chromium)
264....................Clad Plate, Sheet and Strip (chromium-nickel)
268....................Tubing (ferritic)
269....................Tubing (austenitic)
270....................Sanitary Tubing (austenitic)
271....................Tubing for Refinery Service
276....................Bars and Shapes
297....................Castings (iron-chromium, iron-chromium-nickel)
312....................Pipe (austenitic)
313....................Spring Wire (chromium-nickel)
314....................Reforging Bars and Billets
320....................Bolts
336....................Forgings for Drums, Heads and other Pressure
Vessel Components
351....................Castings for Pressure-Containing Parts
(austenitic, austenitic/ferritic-duplex)
352....................Castings for Valves, Flanges and PressureContaining Parts for Low-Temperature Service
356....................Castings for Cylinders (Shells) and Valves for
Steam Turbine Applications
358....................Electric Fusion Welded Pipe (austenitic)
368....................Wire Strand
376....................Pipe for High-Temperature Central Station
Service (austenitic)
403....................Pipe Fittings
409....................Welded Large Diameter Pipe (austenitic)
412....................Plate, Sheet, Strip (chromium-nickel-manganese)
Note: Replaced by A666
426....................Centrifugally Cast Pipe (ferritic)
430....................Forged and Bored Pipe (austenitic)
447....................Castings (chromium-nickel-iron) for HighTemperature Service
450....................General Requirements for Tubes (austenitic,
ferritic)
453....................Bolting Material, High-Temperature (not for
general purpose applications)
473....................Forgings
478....................Weaving Wire
479....................Bars and Shapes for Use in Boilers and other
Pressure Vessels
480....................General Requirements for Plate, Sheet and Strip
484....................General Requirements for Forgings
487....................Castings Suitable for Pressure Service
(martensitic)
492....................Rope Wire
493....................Cold Heading & Cold Forging Bar and Wire
498....................Heat Exchanger Tubes with Integral Fins
(austenitic, ferritic)
511....................Mechanical Tubing (seamless)
554....................Mechanical Tubing (welded)
555....................General Requirement for Wire and Wire Rods
564....................Bars and Shapes, Hot-Rolled and Cold-Finished
(age hardening)
2

565....................Forgings and Forging Stock (martensitic)

580....................Wire
581....................Wire (free-machining)
582....................Bars, Hot-Rolled or Cold-Finished (freemachining)
608....................Tubing Centrifugally Cast (iron-chromium-nickel)
632....................Tubing, Small Diameter (austenitic)
666.....................Sheet, Strip, Plate and Flat Bar for Structural and
Architectural Applications
Note: This specification has replaced A177 and
A412
688....................Feedwater Heater Tubes (welded, austenitic)
693....................Plate, Sheet and Strip (precipitation hardening)
705....................Forgings (age-hardening)
731....................Pipe (ferritic, martensitic)
733....................Pipe Nipples (austenitic)
743....................Castings, Corrosion-Resistant, for General
Applications
744....................Castings, Corrosion-Resistant, for Severe Service
747....................Castings, Precipitation Hardening
757....................Castings for Pressure-Containing Parts for
Petroleum and Gas Pipelines
771....................Tubing for Breeder Reactor Core Components
(austenitic)
774....................Fittings (as welded wrought, austenitic)
778....................Tubular Products (welded, austenitic)
781....................Common Requirements for Castings
789....................Tubing (ferritic/austenitic-duplex)
790....................Pipe (ferritic/austenitic-duplex)
791....................Tubing (ferritic)
793....................Floor Plate (rolled)
803....................Feedwater Heater Tubes (ferritic)
813....................Pipe (single or double welded, austenitic)
814....................Pipe (cold-worked, welded, austenitic)
815....................Pipe Fittings (ferritic, ferritic/austenitic-duplex,
martensitic)
826....................Duct Tubes for Breeder Reactor Core
Components
831....................Forgings for Core Components of Liquid Cooled
Nuclear Reactors
851....................Condenser Tubes (high-frequency induction,
welded, austenitic)
872....................Pipe, Centrifugally Cast (ferritic/austeniticduplex)
887....................Borated Plate, Sheet and Strip for Nuclear
Applications
890....................Castings (austenitic/ferritic-duplex) for General
Applications
895....................Plate, Sheet and Strip (free-machining)
908....................Needle Tubing
928....................Pipe, Electric Fusion Welded with the Addition of
Filler Metal (ferritic/austenitic-duplex)

ASTM F
55......................Surgical Implants, Bar and Wire
56......................Surgical Implants, Sheet and Strip
138....................Surgical Implants, Bar and Wire (special quality)
139....................Surgical Implants, Sheet and Strip (special
quality)
593....................Bolts, Hex Cap Screws
594....................Nuts
738M.................Metric Bolts, Screws and Studs
836M.................Metric Nuts
837/837M .........Socket Head Cap Screws (Metric)
879/879M .........Socket Button and Flat Countersunk Head Cap
Screws (Metric)
880/880M .........Socket Set Screws (Metric)

5360 SSINA Format

6/12/01

3:05 PM

Page 5

STANDARD PRACTICES FOR:

SPECIFICATIONS BY MILL SHAPE

Specification Practice Reference

1. BAR (ASTM Volume 01.05)

ASTM A
262....................Austenitic Stainless Steel Susceptibility to
Intergranular Attack
380....................Cleaning/Descaling Stainless Steel
Parts/Equipment/Systems
609....................Castings, Martensitic Stainless Steel, Ultrasonic
Examination Thereof
700....................Packaging, Marking and Loading Steel Products
for Domestic Shipment
745....................Ultrasonic Examination of Austenitic Steel
Forgings
763....................Ferritic Stainless Steels Susceptibility to
Intergranular Attack
799....................Calibration/Testing of Instruments for Estimating
Ferrite Content of Cast Stainless Steels
800....................Steel Castings, Austenitic Alloy, Estimating
Ferrite Content Thereof
880....................Criteria for Use in Evaluation of Testing
Laboratories and Organizations for Examination
and Inspection of Stainless Steels

These specifications cover hot-finished or cold-finished bars

including rounds, squares, hexagons and hot-rolled or extruded
shapes, such as angles, tees, and channels in the more
commonly used types of stainless steel.

STANDARD TEST METHODS FOR:

Specification Test Reference
ASTM A
604....................Macroetch Testing, Bars, Billets, Blooms
923....................Detecting Detrimental Intermetallic Phase in
Wrought Ferritic/Austenitic-Duplex Stainless
Steels

A 484/484M: .....General requirements that apply to stainless

steel bars (and applies to each of the following:
A 276, A 314, A 473, A 479/479M, A 564/564M,
A 565, A 582, A 705/705M, A 831)
A276: ................Stainless steel hot/cold-finished bars
A 479/479M: .....Stainless steel bars for boilers/pressure vessels
A 564/564M: ....Age-hardened stainless steel bars
A 565: ...............Martensitic stainless steel bars
A 582: ...............Free-machining stainless steel bars
A 831: ...............Stainless steel bars for core components of
liquid-cooled nuclear reactors
2. CASTINGS (ASTM Volume 01.02)
A 781/781M: .....Castings, steel and alloy, common requirements,
for general industrial use (includes the following:
A 297/297M, A 447/447M, A 743/743M,
A 744/744M, A 747/747M, and A 890/890M)
A 297/297M: .....Steel castings, iron-chromium, and ironchromium-nickel, heat-resistant, for general
application
A 447/447M: .....Steel castings, chromium-nickel-iron alloy
(25-12 class) for high-temperature service.
A 743/743M: .....Castings, iron-chromium-nickel, corrosionresistant, for general application
A 744/744M: .....Castings, iron-chromium-nickel, corrosion
resistant, for severe service
A 747/747M: .....Steel castings, stainless, precipitation hardening
A 890/890M: .....Castings, iron-chromium-nickel-molybdenum
corrosion-resistant, austenitic/ferritic (duplex) for
general applications
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
A 217/217M: .....Stainless steel castings for pressure-containing
parts for high-temperature service
A 351/351M: .....Steel castings, austenitic, austenitic/ferritic
(duplex), for pressure-containing parts
A 352/352M: .....Stainless steel castings for valves, flanges and
pressure-containing parts for low-temperature
service
A 356/356M: .....Stainless steel castings for cylinders (shells),
valve chests, throttle valves, and other heavywalled castings for steam turbine applications
A 478/487M: .....Steel castings suitable for pressure service
(martensitic)
A 757/757M: .....Stainless steel castings for pressure-containing
parts and other applications intended primarily
for petroleum and gas pipelines subject to lowtemperature service

5360 SSINA Format

6/12/01

3:05 PM

Page 6

3. FORGINGS (ASTM Volume 01.05)

5. PLATE, SHEET and STRIP (ASTM Volume 01.03)

These specifications cover forgings and billets or other semifinished material (except wire) for forging.

A 480/480M: .....General requirements for flat-rolled stainless and

heat-resisting steel plate, sheet, and strip
(and applies to each of the following:
A 167, A 176, A 240/240M, A 263, A 264, A 666,
A 693, A 793, and A 895)
A 167: ...............Stainless and heat-resisting chromium-nickel
steel plate, sheet and strip
A 176: ...............Stainless and heat-resisting chromium steel
plate, sheet and strip
A 240/240M: .....Heat-resisting chromium and chromium-nickel
stainless steel plate, sheet and strip for pressure
vessels
A 263: ...............Corrosion-resistant chromium steel clad plate,
sheet and strip
A 264: ...............Stainless chromium-nickel steel clad plate, sheet
and strip
A 666: ...............Austenitic stainless steel sheet, strip, plate and
flat bar for structural and architectural
applications (replaces A 177 and A 412)
A 693: ...............Precipitation-hardening stainless steel and heatresistant steel plate, sheet and strip
A 793: ..............Stainless steel rolled floor plate
A 895: ..............Free-machining stainless steel plate, sheet and
strip

A 484/484M: .....General requirements that apply to stainless

steel forgings (and applies to each of the
following:
A 276, A 314, A 473, A 479/479M, A 564/564M,
A 565, A 582, A 705/705M, and A 831)
A 314: ...............Stainless steel billets and bars for reforging
A 473: ...............Stainless steel forgings for general use
A 705/705M: .....Age-hardened stainless steel forgings for
general use
A 831: ...............Stainless steel forgings for core components of
liquid-colled nuclear reactors
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
A 336/336M: .....Stainless steel forgings for boilers, pressure
vessels, high-temperature parts, and associated
equipment
4. PIPE (ASTM Volume 01.01)
A 312/312M: .....Seamless and welded austenitic stainless steel
pipes
A 409/409M: .....Welded large diameter austenitic steel pipe for
corrosive or high-temperature service.
A 814/814M: .....Cold-worked welded austenitic stainless steel
pipe
A 813/813M: .....Single- or double-welded austenitic stainless
steel pipe
A 376/376M: .....Seamless austenitic steel pipe for hightemperature central-station service
A 358/358M: .....Electric-fusion-welded austenitic chromiumnickel alloy steel pipe for high-temperature
service
A 430/430M: .....Austenitic steel forged and bored pipe for hightemperature service
A 731/731M: .....Seamless, welded ferritic, and martensitic
stainless steel pipe
A 426: ...............Centrifugally cast ferritic alloy steel pipe for hightemperature service
A 790/790M: .....Seamless and welded ferritic/austenitic (duplex)
stainless steel pipe
A 872: ..............Centrifugally cast ferritic/austenitic (duplex)
stainless pipe for corrosive environments
A 928/928M: .....Ferritic/austenitic (duplex) stainless steel pipe
electric fusion welded with addition of filler metal

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
A 887: ...............Borated stainless steel plate, sheet and strip for
nuclear applications
6. TUBE (ASTM 01.01)
A 450/450M: .....General requirements for carbon, ferritic alloy,
and austenitic alloy steel tubes (and includes
the following:
A 213/213M, A 249/249M, A 268/268M, A 269,
A 270, A 271, A 688/688M, A 771, A 789/789M,
A 791/791M, A 803/803M, A 826, A 851)
A 213/213M: .....Seamless ferritic and austenitic alloy-steel boiler,
superheater, and heat exchanger tubes
A 249/249M: .....Welded austenitic steel boiler, superheater, heat
exchanger, and condenser tubes
A 268/268M: .....Seamless and welded ferritic and martensitic
stainless steel tubing for general service
A 269: ...............Seamless and welded austenitic stainless steel
tubing for general service
A 270: ...............Seamless and welded austenitic stainless steel
sanitary tubing
A 271: ...............Seamless austenitic chromium-nickel stainless
steel tubes for refinery service
A 688/688M: .....Welded austenitic stainless steel feedwater
heater tubes
A 771: ...............Austenitic stainless steel tubing for breeder
reactor core components
A 789/7899M:...Seamless and welded ferritic/austenitic (duplex)
stainless steel tubing for general service
A 791/791M: .....Welded unannealed ferritic stainless steel tubing
A 803/803M: .....Welded ferritic stainless steel feedwater heater
tubes
A 826: ...............Austenitic and ferritic stainless steel duct tubes
for breeder reactor core components
A 851: ...............High-frequency induction welded, unannealed,
austenitic steel condenser tubes
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

5360 SSINA Format

6/12/01

3:05 PM

Page 7

A 632: ..............Seamless and welded austenitic stainless steel

tubing (small diameter) for general service
A 498: ...............Seamless and welded carbon, ferritic and
austenitic alloy steel heat exchanger tubes with
integral fins
A 608: ...............Centrifugally cast iron-chromium-nickel highalloy tubing for pressure applications at high
temperature
A 778: ..............Welded unannealed austenitic stainless steel
tubular products
A 908: ...............Stainless steel needle tubing
7. MECHANICAL TUBING (ASTM Volume 01.01)
A 511: ...............Seamless stainless steel mechanical tubing
A 554: ...............Welded stainless steel mechanical tubing
8. WIRE & WIRE ROD (ASTM Volume 01.03)
Wire is intended primarily for cold forming, including coiling,
standing, weaving, heading and machining. Wire rods are
semifinished products intended primarily for the manufacturer of
wire.
A 555/555M: .....General requirements for stainless steel and
heat-resistant steel wire and wire rods
(and apply to the following:
A 313, A 368, A 478, A 492, A 493, A 580/580M,
and A 581/581M)
A 313: ...............Chromium-nickel stainless steel and heatresisting steel spring wire
A 368: ...............Stainless steel and heat-resisting steel wire
strand
A 478: ...............Chromium-nickel stainless steel and heatresisting steel weaving and knitting wire
A 492: ...............Stainless steel and heat-resisting steel rope wire
A 493: ...............Stainless steel and heat-resisting steel wire and
wire rods for cold heading and cold forming
A 580/580M: .....Stainless steel and heat-resisting steel wire
(includes round, square, octagon, hexagon, and
shape wire) in coils only
A 581/581M: .....Free-machining stainless steel and heat-resisting
steel wire and wire rod

STAINLESS STEEL SPECIFICATIONS BY PRODUCT TYPE

1. BEARINGS (ASTM Volume 01.05)
A 756: ...............Stainless anti-friction bearing steel
2. BOLTS (and NUTS) (ASTM Volume 01.01)
A 193/193M: .....Alloy steel and stainless steel bolting materials
for high-temperature service
A 194/194M: .....Carbon and alloy steel nuts for bolts for highpressure and high-temperature service
A 320: ...............Alloy steel bolting materials for low-temperature
service
A 453/453M: .....Bolting material, high-temperature, 50 to 120 ksi
(345 to 827 mpa) yield strength, with expansion
coefficients comparable to austenitic steels (not
for general purpose applications)
3. PIPE FITTINGS (ASTM Volume 01.01)
A 403/403M: .....Wrought austenitic stainless steel pipe fittings
A 815/815M: .....Wrought ferritic, ferritic/austenitic (duplex), and
martensitic stainless steel piping fittings
A 733: ...............Welded and seamless austenitic stainless steel
pipe nipples
4. FITTINGS, FLANGES and VALVES (ASTM Volume 01.01)
A 774/774M: .....As-welded wrought austenitic stainless steel
fittings for general corrosive service at low and
moderate temperatures
A 182/182M: .....Forged or rolled alloy-steel pipe flanges, forged
fittings, and valves and parts for hightemperature service
5. FASTENERS (ASTM Volume 15.08)
F 593:................Stainless steel bolts, hex cap screws, and bolts
F 594:................Stainless steel nuts
F 738M: ............Stainless steel metric bolts, screws & studs
F 836M: ............Stainless steel metric nuts
F 837/837M: .....Stainless steel socket head cap screws
F 879/879M: .....Stainless steel socket button and flat
countersunk head cap screws
F 880/880M: .....Stainless steel socket set screws
6. ARCHITECTURAL APPLICATIONS
A 666: ...............Austenitic stainless steel sheet, strip, plate and
flat bar for structural and architectural
applications
7. SANITARY TUBING
A 270: ...............Seamless and welded austenitic stainless steel
sanitary tubing

5360 SSINA Format

6/12/01

3:05 PM

Page 8

SPECIFICATIONS BY GRADE TYPE ARE LISTED BELOW:

(Generally they apply to mill products: BAR, PLATE, SHEET, STRIP, SINGLE & WIRE)
*ASTM coating specs are not included
TYPE

UNS

ASTM

Military

Federal

SAE

AMS

201

S20100

A 240
A 276
A 473
A 666

QQ-S-766C

202

S20200

A 240
A 276
A 314
A 473
A 666

QQ-S-766C

205

S20500

A 276
A 473
A 666

301

S30100

A 240
A 264
A 554
A 666

MIL-S-5059
MIL-S-22216
MIL-T-5695

QQ-S-682
QQ-S-766

30301

5517
5518
5519

302

S30200

A 240
A 264
A 276
A 313
A 314
A 368
A 473
A 478
A 479
A 492
A 493
A 511
A 554
A 580
A 666

MIL-S-853
MIL-S-854
MIL-S-862
MIL-S-5059
MIL-S-7720
MIL-S-17509
MIL-S-22216
MIL-S-46044
MIL-T-5677
MIL-W-6712
MIL-W-17481

QQ-S-682
QQ-S-763
QQ-S-766
QQ-S-786
QQ-W-423

30302

5358
5515
5516
5517
5518
5519
5560
5565
5636
5637
5688

302 B

S30215

A 167
A 276
A 473
A 580

QQ-S-766

30302 B

303

S30300

A 194
A 314
A 320
A 473
A 581
A 582
A 895

MIL-S-853
MIL-S-862
MIL-S-7720
MIL-W-52263

QQ-S-763
QQ-S-764

30303

5640

303Se

S30323

A 194
A 314
A 320
A 473
A 511
A 581
A 582
A 895

MIL-S-862
MIL-S-7720
MIL-W-52263

QQ-S-763
QQ-S-764

30303Se

5640
5738

ACI

CF-20

HF

CF-16F

Unified Numbering System: Included in the tables are six-character designations under the Unified Numbering System
(UNS) for the AISI numbered stainless steels. The Unified Numbering System originated through a cooperative effort of the
American Society for Testing and Materials and the Society of Automotive Engineers, and UNS numbers apply to all metals and
alloys. All stainless steels will be identified under this system with the letter S followed by five digits.
ACI
Military
Federal
SAE
AMS
ASTM
6

American Casting Institute

United States Government
United States Government
Society of Automotive Engineers
Aerospace Material Specifications
American Society for Testing and Materials

5360 SSINA Format

6/12/01

3:05 PM

Page 9

TYPE

UNS

ASTM

Military

Federal

SAE

AMS

ACI

304

S30400

A 182
A 193
A 194
A 213
A 240
A 249
A 264
A 269
A 270
A 271
A 276
A 312
A 313
A 314
A 320
A 336
A 358
A 368
A 376
A 409
A 430
A 473
A 478
A 479
A 492
A 493
A 511
A 554
A 580
A 632
A 666
A 688

MIL-F-20138
MIL-P-1144
MIL-S-853
MIL-S-854
MIL-S-862
MIL-S-5059
MIL-S-18170
MIL-S-22216
MIL-S-23195
MIL-S-23196
MIL-T-6845
MIL-T-8504
MIL-T-8506
MIL-T-18063
MIL-W-17481

QQ-S-763
QQ-S-766
QQ-W-423

30304

5370
5371
5501
5511
5513
5560
5565
5566
5567
5639
5697

CF-8

304L

S30403

A 182
A 213
A 240
A 249
A 264
A 269
A 270
A 276
A 312
A 314
A 336
A 358
A 409
A 473
A 478
A 479
A 493
A 511
A 554
A 580
A 632
A 666
A 688

MIL-S-853
MIL-S-854
MIL-S-862
MIL-S-4043
MIL-S-18170
MIL-S-18171
MIL-S-22216
MIL-S-23195
MIL-S-23196
MIL-T-18063

QQ-S-763
QQ-S-766

30304 L

5370
5371
5511
5513
5647

CF-3

304N

S30451

A 182
A 193
A 194
A 240
A 276
A 312
A 336
A 358
A 376
A 430
A 479
A 666
A 688

5360 SSINA Format

TYPE

6/12/01

UNS

304LN

3:05 PM

ASTM

Page 10

Military

Federal

SAE

AMS

5514
5685
5686

ACI

A 240
A 276
A 269
A 336
A 358
A 376
A 479
A 666
A 688

305

S30500

A 240
A 249
A 276
A 313
A 314
A 368
A 473
A 478
A 492
A 493
A 511
A 554
A 571
A 580

MIL-W-3068
MIL-W-17481

QQ-S-423
QQ-S-763
QQ-S-766
QQ-W-409
QQ-W-423

30305

308

S30800

A 167
A 276
A 314
A 473
A 580

MIL-E-19933
MIL-R-5031

QQ-S-706

30308

309

S30900

A 167
A 240
A 249
A 264
A 276
A 312
A 314
A 473
A 580

MIL-E-19933
MIL-R-5031
MIL-S-862

QQ-S-763
QQ-S-766

30309

5523
5574
5650

CH-20

309S

S30908

A 213
A 240
A 276
A 312
A 314
A 358
A 409
A 478
A 479
A 511
A 554
A 580

QQ-S-763
QQ-S-766

30309S

5523
5574
5650

HH

310

S31000

A 167
A 182
A 213
A 240
A 249
A 276
A 312
A 314
A 336
A 473
A 580
A 632

QQ-S-763
QQ-S-766
QQ-W-423

30310

5521
5572
5577
5651
5694
5695

CK-20

MIL-E-19933
MIL-N-15721
MIL-R-5031
MIL-S-853
MIL-S-854
MIL-S-862
MIL-S-22216
MIL-W-17481

5360 SSINA Format

6/12/01

3:05 PM

Page 11

TYPE

UNS

ASTM

Military

310S

S31008

A 213
A 240
A 249
A 264
A 276
A 314
A 358
A 409
A 473
A 479
A 511
A 554
A 580

314

S31400

A 276
A 314
A 473
A 580

316

S31600

A 182
A 193
A 194
A 213
A 240
A 249
A 264
A 269
A 270
A 271
A 276
A 312
A 313
A 314
A 320
A 336
A 358
A 376
A 409
A 430
A 473
A 478
A 479
A 492
A 493
A 511
A 554
A 580
A 632
A 666
A 688
F 55
F 56

MIL-E-16715
MIL-E-19933
MIL-S-854
MIL-S-862
MIL-S-867
MIL-S-1144
MIL-S-5059
MIL-S-7720
MIL-S-18262
MIL-S-22216
MIL-W-17481

316L

S31603

A 182
A 213
A 240
A 249
A 269
A 270
A 276
A 312
A 314
A 336
A 358
A 376
A 409
A 473
A 478
A 479
A 493
A 511
A 554
A 580
A 632
A 666
A 688

MIL-E-19933
MIL-R-5031
MIL-S-862
MIL-S-7720

Federal

SAE

AMS

ACI

QQ-S-763
QQ-S-766

30310S

5521
5572
5577
5651

HK

30314

5522
5652

QQ-S-763
QQ-S-766
QQ-W-423

30316

5524
5573
5646
5648
5649
5690
5691

CF-8M
CF-12M

QQ-S-763
QQ-S-766

30316L

5507
5646
5653

CF-3M

5360 SSINA Format

6/12/01

TYPE

UNS

316F

S31620

316N

S31651

316LN

3:05 PM

ASTM

Military

Federal

SAE

AMS

MIL-E-19933
MIL-S-862

QQ-S-763

30317

CG-8M

MIL-E-19933
MIL-P-1144
MIL-S-853
MIL-S-854
MIL-S-862
MIL-S-6721
MIL-S-22216
MIL-T-6737
MIL-T-8606
MIL-T-8808

QQ-S-682
QQ-S-763
QQ-S-766

30321

5510
5557
5559
5570
5576
5645
5689
7211

A 182
A 193
A 194
A 240
A 312
A 376
A 430
A 479
A 666
A 688
A 240
A 269
A 336
A 358
A 376
A 479
A 688

317

S31700

A 182
A 213
A 240
A 249
A 269
A 276
A 312
A 314
A 409
A 473
A 478
A 479
A 511
A 554
A 580
A 632
F 55
F 56
F 138
F 139

317L

S31703

A 182
A 213
A 240
A 249
A 269
A 312
F 55
F 56
F 138
F 139

321

S32100

A 182
A 193
A 194
A 213
A 240
A 249
A 264
A 269
A 271
A 276
A 312
A 313
A 314
A 320
A 336
A 358
A 376
A 409
A 430
A 473
A 479
A 511
A 554
A 580
A 632

10

Page 12

ACI

5360 SSINA Format

6/12/01

3:05 PM

Page 13

TYPE

UNS

ASTM

Military

Federal

SAE

329

S32900

A 240

330

N08330

A 554
B 511
B 512
B 535
B 536
B 546

347

S34700

A 182
A 193
A 194
A 213
A 240
A 249
A 264
A 269
A 271
A 276
A 312
A 313
A 314
A 320
A 336
A 358
A 376
A 409
A 430
A 473
A 479
A 511
A 554
A 580
A 632

MIL-E-16715
MIL-E-19933
MIL-R-5031
MIL-S-853
MIL-S-862
MIL-S-6721
MIL-S-17509
MIL-S-18170
MIL-S-18171
MIL-S-22216
MIL-S-23195
MIL-S-23196
MIL-T-6737
MIL-T-8606
MIL-T-8808
MIL-T-18063

QQ-S-682
QQ-S-763
QQ-S-766

30347

348

S34800

A 182
A 213
A 240
A 249
A 269
A 276
A 312
A 314
A 358
A 376
A 409
A 473
A 580
A 632

MIL-S-867
MIL-S-6721
MIL-S-18191
MIL-S-23195
MIL-S-23196

QQ-S-766

30348

384

S38400

A 493

403

S40300

A 176
A 276
A 314
A 479
A 511
A 580

QQ-S-763

51403

405

S40500

A 240
A 268
A 276
A 314
A 479
A 511
A 580

QQ-S-763

51405

409

S40900

A 240
A 651
A 791
A 803

AMS

ACI

5592
5716

HK

5363
5512
5556
5558
5571
5575
5646
5654
5680
5681
7229

CF-8C

30384
5614

51409

11

5360 SSINA Format

6/12/01

3:05 PM

TYPE

UNS

ASTM

410

S41000

414

Page 14

Federal

SAE

AMS

A 193
A 194
A 240
A 268
A 276
A 314
A 473
A 479
A 493
A 511
A 580

QQ-S-763
QQ-S-766

51410

5504
5613

S41400

A 276
A 314
A 473
A 479
A 511
A 580

QQ-S-763

51414

5615

416

S41600

A 194
A 314
A 473
A 581
A 582
A 895

MIL-W-52263

QQ-S-764

51416

5610

416Se

S41623

A 194
A 314
A 473
A 511
A 581
A 582
A 895

MIL-W-52263

QQ-S-764

51416Se

5610

420

S42000

A 176
A 276
A 314
A 473
A 580

QQ-S-763
QQ-S-766

51420

5506
5621

420F

S42020

A 582
A 895

51420F

5620

422

S42200

429

S42900

A 182
A 240
A 268
A 276
A 314
A 473
A 493
A 511
A 554

430

S43000

A 182
A 240
A 268
A 276
A 314
A 473
A 479
A 493
A 511
A 554
A 580

430F

S43020

A 314
A 473
A 581
A 582
A 895

12

Military

51422
51429

MIL-W-52263

QQ-S-763
QQ-S-764

51430

QQ-S-764

51430F

5503
5627

ACI

5360 SSINA Format

6/12/01

3:05 PM

Page 15

TYPE

UNS

ASTM

Military

Federal

SAE

430FSe

S43023

A 314
A 473
A 581
A 582
A 895

MIL-W-52263

QQ-S-764

51430FSe

431

S43100

A 176
A 276
A 314
A 473
A 493
A 580

MIL-S-18732

434

S43400

51434

436

S43600

51436

439

S43035

A 240
A 268
A 791
A 803

440A

S44002

A 276
A 314
A 473
A 580

QQ-S-763

51440A

440B

S44003

A 276
A 314
A 473
A 580

QQ-S-763

51440B

440C

S44004

A 276
A 314
A 473
A 493
A 580

QQ-S-763

51440C

442

S44200

A 176

444

S44400

A 240
A 268
A 791

446

S44600

A 176
A 276
A 314
A 473
A 580

446 MOD

S44660

A 240
A 268
A 791
A 803

S13800

A 564
A 693
A 705

5629

S15500

A 564
A 693
A 705

5520
5658
5659

S17400

A 564
A 693
A 705

5604
5622
5643

S17700

A 564
A 693
A 705

S31803

A 240

2205

51431

AMS

5628

5631

5630

51442

QQ-S-763
QQ-S-766

MIL-S-25043

51446

5529
5644
5673

ACI

5360 SSINA Format

6/14/01

10:01 AM

Page 16

Stainless
Steel
The
Value
Option

STAINLESS STEEL PRODUCERS

SPECIALTY STEEL INDUSTRY OF NORTH AMERICA
Allegheny Ludlum Corporation
1000 Six PPG Place
Pittsburgh, PA 15222-5479
(412) 394-2800
Al Tech Specialty Steel Corporation
P.O. Box 152
Dunkirk, NY 14048
(716) 366-1000
Armco Inc.
Specialty Flat-Rolled Steels
P.O. Box 832
Butler, PA 16003-0832
(412) 284-3000
Avesta Sheffield, Inc.
425 N. Martingale Road
Suite 2000
Schaumburg, IL 60173-2218
(708) 517-4050
Atlas Specialty Steels
One Centre Street
P.O. Box 1000
Welland, OT L3B 5R7
CANADA
(800) 263-5712
Atlas Stainless Steels
1040 Marie Victorin Road
Tracy, Quebec
CANADA J3R 4R4
(514) 746-5000
Carpenter Technology Corporation
P.O. Box 14662
Reading, PA 19612-4662
(610) 208-2000
Firstmiss Steel, Inc.
P.O. Box 509
Hollsopple, PA 15935
(814) 479-2551
G.O. Carlson, Inc.
350 Marshallton Road
P.O. Box 526
Thorndale, PA 19372-0526
(610) 384-2800

J&L Specialty Steel, Inc.

P.O. Box 3373
Pittsburgh, PA 15230
(412) 338-1600
Mexinox S.A. de C.V.
Cracovia No. 54
San Angel, 01000
Mexico D.F.
011-525-550-4573
North American Stainless
6870 Highway 42 East
Ghent, KY 41045
(502) 347-6000
Precision Specialty Metals, Inc.
3301 Medford Street
Los Angeles, CA 90063
(213) 267-3200
Republic Engineered Steels
Specialty Steel Products Division
410 Oberlin Road S.W.
Massillon, OH 44647
(216) 837-6000
Slater Steels Corporation
Fort Wayne Specialty Metals Division
2400 Taylor Street West
P.O. Box 630
Fort Wayne, IN 46801
(219) 432-2561
Talley Metals Technology, Inc.
P.O. Box 2498
Hartsville, SC 29551
(803) 335-7540
Washington Steel Corporation
P.O. Box 494
Washington, PA 15301
(412) 222-8000