Examples (Usage of Torsion Formula & Power Transmission)
Examples (Usage of Torsion Formula & Power Transmission)
The pipe shown in Fig. 512a has an inner diameter of 80 mm and an outer diameter of 100 mm. If its end is tightened against the support at A using a torque wrench at B, determine the shear stress developed in the material at the inner and outer walls along the central portion of the pipe when the 80-N forces are applied to the wrench.
EXAMPLE 1 (cont)
Solutions
The only unknown at the section is the internal torque T
80(0.3) + 80(0.2 T ) = 0 T = 40 N m M y = 0;
= c0 = 0.05 m
0 =
Tc0 40(0.05) = = 0.345 MPa (Ans) J 5.796 106
EXAMPLE 1 (cont)
Solutions
And for any point located on the inside surface, = ci = 0.04 m
EXAMPLE 2
EXAMPLE 2 (cont)
EXAMPLE 2 (cont)
EXAMPLE 3
EXAMPLE 3 (cont)
EXAMPLE 4
EXAMPLE 4 (cont)
EXAMPLE 5
EXAMPLE 5 (cont)