0% found this document useful (0 votes)
152 views2 pages

RB150 - RB158: Silicon Bridge Rectifiers

This document provides information on silicon bridge rectifiers made by Electronics Industry (USA) Co., Ltd. It includes specifications for 6 rectifier models (RB150 through RB158) with voltage ratings from 50 to 800 volts. The document gives the rectifiers' key electrical characteristics and ratings, as well as derating curves showing how output current and surge current vary with temperature. It also provides the rectifiers' mechanical data, dimensions, and recommended operating conditions.

Uploaded by

Ngocan Huynh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
152 views2 pages

RB150 - RB158: Silicon Bridge Rectifiers

This document provides information on silicon bridge rectifiers made by Electronics Industry (USA) Co., Ltd. It includes specifications for 6 rectifier models (RB150 through RB158) with voltage ratings from 50 to 800 volts. The document gives the rectifiers' key electrical characteristics and ratings, as well as derating curves showing how output current and surge current vary with temperature. It also provides the rectifiers' mechanical data, dimensions, and recommended operating conditions.

Uploaded by

Ngocan Huynh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ELECTRONICS INDUSTRY (USA) CO., LTD.

103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com

RB150 - RB158
PRV : 50 - 800 Volts Io : 1.5 Amperes
FEATURES :
* * * * * * High surge current capability High reliability Low reverse current Low forward voltage drop High case dielectric strength of 2000 VDC Ideal for printed circuit board
0.825 (20.95) 0.605 (15.36)

SILICON BRIDGE RECTIFIERS


RB
0.71 (18.0) 0.63 (16.0)

AC

AC

0.035 (0.89) 0.028 (0.71) 0.500 (12.7) MIN. 0.16 (4.00) 0.14 (3.55) 0.276 (7.01 ) 0.236 (5.99)

MECHANICAL DATA :
* Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Terminals : Plated lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 3.4 grams
Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.

0.105 (2.66) 0.085 (2.16)

Dimensions in inches and ( millimeter )

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

RATING
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current Tc=50C Peak Forward Surge Current, Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage per Diode at IF = 1 Amp. Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance (Note 1) Operating Junction Temperature Range Storage Temperature Range
Notes :

SYMBOL VRRM VRMS VDC IF(AV)

RB150 50 35 50

RB151 100 70 100

RB152 200 140 200 1.5

RB154 400 280 400

RB156 600 420 600

RB158 800 560 800

UNIT Volts Volts Volts Amps.

IFSM VF IR IR(H) RJL TJ TSTG

40 0.95 10 100 15 - 40 to + 140 - 40 to + 140

Amps. Volt A A C/W C C

Ta = 25 C Ta = 100 C

1 ) Thermal resistance from Junction to lead mounted on P.C. Board with 0.47" X 0.47" ( 12mm X 12mm ) Cu pads.

UPDATE : NOVEMBER 1,1998

ELECTRONICS INDUSTRY (USA) CO., LTD.


103 MOO 4, LATKRABANG EXPORT PROCESSING ZONE, LATKRABANG, BANGKOK 10520, THAILAND TEL. : (66 2) 326-0102, 739-4580 FAX. : (66 2) 326-0933 E-mail : eicfirst @ iname.com http. : // www.eicsemi.com

RATING AND CHARACTERISTIC CURVES ( RB150 - RB158 )

FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT


2.0

FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT


40 35 30 25 20 15 10 5 0

AVERAGE FORWARD OUTPUT CURRENT, AMPERES

1.5

1.0

0.5

P.C. Board Mounted with 0.47" X 0.47" ( 12mm X 12mm ) Cu. pads. 0 20 40 60 80 100 120 140

PEAK FORWARD SURGE CURRENT, AMPERES

10

20

40

60

100

CASE TEMPERATURE, ( C)

NUMBER OF CYCLES AT 60Hz

FIG.3 - TYPICAL FORWARD CHARACTERISTICS


10

FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES


10

PER DIODE FORWARD CURRENT, AMPERES

T J = 100 C

1.0

1.0

T J = 25 C
0.1

0.1

T J = 25 C

0.01 0.6

0.7

0.8

0.9

1.0

1.1

1.2

1.3

0.01

20

40

60

80

100

120

140

FORWARD VOLTAGE, VOLTS

PERCENT OF RATED REVERSE VOLTAGE, (%)

You might also like