Scribd
Upload
228 views1 page

EN Heat Treatment Condition

This document provides information on permissible limiting values for heat treatment conditions of steel, including: - Heat treatment conditions are identified by letters P through Z, with ranges of ultimate tensile strength in tons/sq inch and MPa listed for each condition. - Hardness values on the Brinell scale are provided for each condition. - Maximum ruling section sizes in millimeters are specified for various steel grades for each heat treatment condition. - Contact information is provided for the company Special Steels.

Uploaded by

Mani Maran
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
228 views1 page

EN Heat Treatment Condition

This document provides information on permissible limiting values for heat treatment conditions of steel, including: - Heat treatment conditions are identified by letters P through Z, with ranges of ultimate tensile strength in tons/sq inch and MPa listed for each condition. - Hardness values on the Brinell scale are provided for each condition. - Maximum ruling section sizes in millimeters are specified for various steel grades for each heat treatment condition. - Contact information is provided for the company Special Steels.

Uploaded by

Mani Maran
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Information:

Condition Values

PERMISSABLE LIMITING RULING SECTIONS/


HARDNESS VALUES FOR HEAT TREATMENT (As per BS970 Part 1 of 1983)

HT
Condition

UTS
Tons/
SQ. inch

UTS
MPA

HBN
Range

35/45

540-695

40/50

Limiting Ruling Section in Millimetres


13-19

19-29

29-63

63-100

100-150

150-250

152-207

618-772

179-229

45/55

695-849

201-255

50/60

772-926

223-277

EN9
070M55
-

EN8
080M40
-

EN8
080M40
-

55/65

849-1004

248-302

60/70

926-1080

269-331

EN9
070M55
-

65/75

1004-1158

293-352

70/80

1080-1235

311-375

75/85

1158-1312

341-401

EN19
709M40
-

80/90

1235-1390

363-429

100 MIN

1544 MIN

444

EN19
709M40
EN24
817M40
EN24
817M40
EN24
817M40
EN24
817M40

EN19
709M40
EN19
709M40
EN24
M817M40
EN26
826M40
EN26
826M40
EN26
826M40
-

EN9
070M55
EN19
709M40
EN24
817M40
-

EN19
709M40
EN24
817M40
-

EN26
826M40

EN19
709M40
EN24
817M40
EN26
826M40
EN26
826M40
EN26
826M40
EN26
826M40
EN26
826M40
EN30B
835M30

Tel: +27 (0)11 865 4939. Fax: +27 (0)11 902 8995. e-mail: [email protected]

You might also like