Scribd
Upload
341 views1 page

ASME 31 - 4 Calc

This document provides calculations for the pressure rating of a piping component. It includes design data such as a design pressure of 1,067 PSI, design temperature of 176°F, and material properties of API 5L X60 steel with a yield strength of 60,000 PSI. Dimensions of the pipe are provided. Calculations determine the minimum required wall thickness to be 0.198 inches based on the design pressure and yield strength. Additional calculations for the minimum required thickness when the pipe is new and cold are also shown.

Uploaded by

MarcoAlba
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
341 views1 page

ASME 31 - 4 Calc

This document provides calculations for the pressure rating of a piping component. It includes design data such as a design pressure of 1,067 PSI, design temperature of 176°F, and material properties of API 5L X60 steel with a yield strength of 60,000 PSI. Dimensions of the pipe are provided. Calculations determine the minimum required wall thickness to be 0.198 inches based on the design pressure and yield strength. Additional calculations for the minimum required thickness when the pipe is new and cold are also shown.

Uploaded by

MarcoAlba
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Piping Class Pressure Calculation -

Document Number and Revision Job Number Item Component Tag

Design Data:
1,067 PSI 0 PSI 176 F 1,334 PSI 0.000 Inc 0.72 7.36 Mpa 0.00 Mpa 80 C 9.20 Mpa 0.0 mm 0.72 Pv Ph Td Ptest c F Vessel Design Pressure Static Head Pressure Design Temperature Test Pressure Corrosion Allowance Design Factor

Dimensions:
16.000 Inc 0.375 Inc 39.370 Inc 1.00 406.4 mm 9.53 mm 1000 mm 1.00 Do tn L E Outside Diameter Nominal Wall Thickness Length Weld Efficiency

Calculated Properties:
Weigth Empty Internal Volume Weigth Flooded External Surface 93 Kg 3 118 dm 211 Kg 2 1.3 m

Material Properties:
API 5L X60
60,000 PSI 60,000 PSI 413.7 Mpa 413.7 Mpa SY SYt Material Specification Yield strength @ Design temperature Yield strength @ Test temperature

Hot&Corroded
P = Pv + ph Di = Do - 2 * tn + 2 * c Th = tn-c S = SY * E * F

Geometry / Data
Design Pressure Inside diameter Shell thick Allowable Stress Value P= Di = Th = S= 1067 PSI 15.250 Inc 0.375 Inc 43200 PSI 7.4 Mpa 387.3 mm 9.5 mm 297.9 Mpa

Stress relieving NOT required per 434.8.9

ASME/ANSI B31.4 par. 404.1.2


th = P*Do / (2 * S) th + c <= tn MAWP = 2 * Th * S / Do P to MAWP ratio HS = P * Do / ( 2 * Th) Hoop stress at des. cond. Hoop stress to Yield strength ratio Minimum Nominal thick OK th = th + c = MAWP = P / MAWP = HS = H.S. / SY = 22761 PSI 0.198 Inc 0.198 Inc 2026 PSI 5.0 mm 5.0 mm 14.0 Mpa 52.7% 156.9 Mpa 37.9%

New& Cold
Di = Do - 2* tn Th = tn S = SYt * E * 0.9

Geometry / Data
Inside diameter uncorroded Shell thick uncorroded Allowable Stress Value Di = Th = S= 15.250 Inc 0.375 Inc 54000 PSI 387.3 mm 9.5 mm 372.3 Mpa

ASME/ANSI B31.4 par. 404.1.2


MAP = 2 * Th * S / Do Ptest to MAP ratio OK MAP = Ptest / MAP = 2533 PSI 17.5 Mpa 52.7%

HS = Ptest * Do / ( 2 * Th)

Hoop stress at des. cond.

HS =

28451 PSI

196.2 Mpa

Hoop stress to Yield strength ratio

H.S. / SY =

47.4%

You might also like