Scribd
Upload
31 views

Syllabus: Ec 2207 - Digital Electronics Lab L T P C 0 0 3 2

This document outlines the syllabus for two digital electronics lab courses. The EC 2207 course covers designing and implementing adders, subtractors, code converters, magnitude comparators, parity checkers, multiplexers, decoders, counters, and shift registers using logic gates and integrated circuits. It also involves designing some experiments using Verilog hardware description language. The CS 2207 course focuses on verifying Boolean theorems, designing combinational and sequential circuits, adders, parity generators, comparators, and counters using logic gates and integrated circuits. It also involves simulating combinational and sequential circuits using VHDL or Verilog.

Uploaded by

sasi_kar_1
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
31 views

Syllabus: Ec 2207 - Digital Electronics Lab L T P C 0 0 3 2

This document outlines the syllabus for two digital electronics lab courses. The EC 2207 course covers designing and implementing adders, subtractors, code converters, magnitude comparators, parity checkers, multiplexers, decoders, counters, and shift registers using logic gates and integrated circuits. It also involves designing some experiments using Verilog hardware description language. The CS 2207 course focuses on verifying Boolean theorems, designing combinational and sequential circuits, adders, parity generators, comparators, and counters using logic gates and integrated circuits. It also involves simulating combinational and sequential circuits using VHDL or Verilog.

Uploaded by

sasi_kar_1
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

EC 2207 - DIGITAL ELECTRONICS LAB T P C 0 0 3

L 2

Syllabus
1. Design and implementation of Adder and Subtractor using logic gates. 2. Design and implementation of code converters using logic gates (i) BCD to excess-3 code and vice versa (ii) Binary to gray and vice-versa 3. Design and implementation of 4 bit binary Adder/ Subtractor and BCD adder using IC 7483. 4. Design and implementation of 2 bit Magnitude Comparator using logic gates 8 Bit Magnitude Comparator using IC 7485. 5. Design and implementation of 16 bit odd/even parity checker generator using IC74180. 6. Design and implementation of Multiplexer and De-multiplexer using logic gates and study of IC74150 and IC 74154 7. Design and implementation of encoder and decoder using logic gates and study of IC7445 and IC74147. 8. Construction and verification of 4 bit ripple counter and Mod-10 / Mod-12 Ripple counters. 9. Design and implementation of 3-bit synchronous up/down counter. 10. Implementation of SISO, SIPO, PISO and PIPO shift registers using Flip- flops.

11. Design of experiments 1, 6, 8 and 10 using Verilog Hardware Description Language.

CS 2207 - DIGITAL LAB C 0

L 0

T 3

P 2

1. Verification of Boolean theorems using digital logic gates. 2. Design and implementation of combinational circuits using basic gates for arbitrary functions, code converters, etc. 3. Design and implementation of 4-bit binary adder / subtractor using basic gates and MSI devices. 4. Design and implementation of parity generator / checker using basic gates and MSI Devices. 5. Design and implementation of magnitude comparator. 6. Design and implementation of application using multiplexers/ Demultiplexers. 7. Design and implementation of Shift registers. 8. Design and implementation of Synchronous and Asynchronous counters. 9. Simulation of combinational circuits using Hardware Description Language (VHDL/ Verilog HDL software required).

10. Simulation of sequential circuits using HDL (VHDL/ Verilog HDL software required).

You might also like