Home Sign Up!
Browse Community Submit
All Art Craft Food Games Green Home Kids Life Music Offbeat Outdoors Pets Photo Ride Science Tech
Paracord wrist lanyard made with the snake knot
by Stormdrane on September 12, 2007 Table of Contents Paracord wrist lanyard made with the snake knot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intro: Paracord wrist lanyard made with the snake knot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 1: Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 2: Attaching two colors of paracord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 3: Find the center of the length of paracord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 4: Making the snake knot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 5: Count your knots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 6: Trim and melt the excess paracord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step 7: You're done! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 2 2 3 3 7 7 7 9 9
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Intro: Paracord wrist lanyard made with the snake knot
This instructable will show how to make a wrist lanyard using paracord and the snake knot. The lanyard can be used to secure a key chain, knife, multi-tool, flashlight, cell phone, camera, binoculars, compass, etc. More projects, links, knot references can be seen on my blog page, Stormdrane's Blog.
Step 1: Supplies
You'll need about 4.5 feet of paracord(you may use other types of cordage if desired). The paracord I used is from the Supply Captain. I left the inner strands in the paracord, but you can remove them if preferred. If done in one color, it will be one continuous 4.5 ft length, if done in two colors, you'll need 3 ft for the primary color that includes the wrist section, and 1.5 ft for the second color that will show in the snake knot. Also used are scissors, tape measure or ruler, lighter, hemostats or needle nose pliers(not necessary, but they make it much easier), and a swivel clip, key ring, snap hook, cell phone lariat, carabiner, or whatever attachment you prefer to use.
Step 2: Attaching two colors of paracord
If using two colors of paracord, you will insert one color about 1/2 inch into the other color. You may remove a small amount of the paracord's inner strands by pulling them out, trimming with scissors, and pulling the paracord outer sheath back over the strands, leaving room to insert the other color. For various projects, I've used three different methods for attaching two colors of paracord: melting, sewing, or gluing. The choice is yours, I usually sew them together, it doesn't matter as long as it's a good connection. It will be hidden under the first knot.
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Step 3: Find the center of the length of paracord
Take the center of the length of cord and bring it thru the attachment, I'm using a swivel clip. For this tutorial I'm measuring the wrist loop at about 10 inches from the attachment. The connection of the two colors will be just on the other side at this point.
Step 4: Making the snake knot
The snake knot will be made 'around' the wrist loop section of paracord, the loop strands being the 'core' of the knot. I've added a series of photos showing the steps I use. By using two colors, you'll see that I flip the lanyard over after making each knot, so that I'm working with the cord on the right side of the lanyard. I bring it under all the other cords, working the hemostats under the previously tightened knot and pulling the cord back thru. Then tightening up the knot keeping the cord from twisting and working it up against the previous knot. Again flipping the work over, you'll see two parallel cords of the same color which will be split with the cord on the right going under, around, and pulled thru with the hemostats, then tightened up. Continue this procedure until you've done about 10 snake knots(you can count them down either side.
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Step 5: Count your knots
Once you have 10 snake knots you're almost done. You'll notice from the photos of both sides of the lanyard, that one side has the snake knots alternating all the way down and the other has a set of parallel knots at the top and botton of the sequence of knots. You'll always have those at the start and finish of the snake knots, I prefer to have them end up on the same side of the lanyard so one side appears to have a more uniform look, but it's not required.
Step 6: Trim and melt the excess paracord
Use the scissors to trim off the excess cord and quickly melt the ends with a lighter so they don't fray.
Step 7: You're done!
You can make a range of variations using less or more cord/knots. Shorten the loop for a double ended key chain or make the loop longer for use as a neck lanyard, a Lanyard Break-Away Connector could be added for the safety conscious. You can also add a wooden bead, skull, cord lock, etc. Visit my blog page for more knot related projects, links, and resources: Stormdrane's Blog. You can find ideas for other gear/gadgets to attach to your lanyard on EDC Forums.
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Related Instructables
Survival Bracelet II by tevers94
Survival Bracelet (Updated!) by tevers94
Cobra Weave Key Fob by tevers94
square paracord personal suvival lanyard by kit by steampunk1942 paintballworld
Paracord Survival Necklace by ERCCRE123
Comments
50 comments Add Comment view all 86 comments
jielder says:
Thanks for the Instructable, just made two of them to use as snowboard leashes...
Jan 27, 2011. 9:45 PM REPLY
DonB! says:
Jan 25, 2011. 8:09 AM REPLY I saw a keychain on the internet, simply used as a photo, and loved it, but wondered where that particular knot pattern could be found. I should have obviously turned to you, stormdrane, and all of your great tutorials. You really have a creative knack for color, weave patterns, etc. Thanks for sharing it all with us.
the gizmoman says:
Dec 23, 2010. 1:44 PM REPLY You and tying it all together (YouTube) have some amazing knots and tutorials keep up the good work (are you on YouTube under stormdrane?)
Stormdrane says:
Yep, that'd be me. :)
Dec 23, 2010. 3:27 PM REPLY
the gizmoman says:
Dec 25, 2010. 7:21 AM REPLY I love trying to tie different and unique knots. I got intrested in tying knots through the boyscouts (I'm an eaglescout by the way) I saw your blog and you got some amazing pieces of art ( rope art that is. )
DrSteve says:
Aug 18, 2009. 6:35 PM REPLY Where does one purchase the hardware for these types of projects (swivel clip, key ring, snap hook, cell phone lariat, carabiner)? Thanks.
Vijster1 says:
rings, clips, and hooks can be found at a hobby store
Nov 12, 2010. 4:18 PM REPLY
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
jaberwok32 says:
WALMART!
Sep 5, 2009. 9:54 AM REPLY
DrSteve says:
Really....comon....where? I need like 200
Sep 5, 2009. 11:39 AM REPLY
devangelista says:
Aug 14, 2010. 5:18 PM REPLY You can get like 300 feet of it at the us calve store for 20 bucks. http://www.uscav.com/Productinfo.aspx?productID=5444&TabID=548
DrSteve says:
Aug 19, 2009. 12:31 PM REPLY Thanks. This is great. I am about to start making about 200 monkey fist keychains and Boy Scout woggle neckerchief slides (Turks Head knot). I was having problems finding ball bearings and the hardware! YOU ROCK! How about a place for beads and ball bearings!?
Stormdrane says:
Aug 19, 2009. 1:37 PM REPLY For beads, check local craft stores. Since beads need a hole large enough for cord to fit through, seeing them in person lets you see if they'll work with the cord you have. Buying online is guess work if they don't list the inner diameter of the bead's hole, where 4mm is about the smallest you'll get a loop of gutted paracord pulled through. Aug 19, 2009. 1:33 PM REPLY
Stormdrane says:
For ball bearings, I've used this ebay seller(ToolSupply). They also carry wooden balls.
You can check your local machine shops and auto repair shops for ball bearings too. Just look them up and give them a call to see if they have any.
Stormdrane says:
Aug 18, 2009. 7:46 PM REPLY There are multiple sources for them, here are a few: cdwplus.com enchantedbeads.com lighthound.com tadgear.com countycomm.com supplycaptain.com photonlight.com ebay.com You may find some at your local hardware store, walmart, home depot, lowes, michaels craft store, and hobby lobby...
moosesyfer104 says:
im a ninja.......................... with paracord
Aug 2, 2010. 3:35 PM REPLY
knektek says:
Jul 27, 2010. 1:23 PM REPLY Are there any companies that sell cheap paracord in the UK? All I have right now is like 2 meters of olive green (boring) cord left.
Stormdrane says:
You might try The Bushcraft Store for paracord in the UK(type paracord in the search bar of the linked page). ;)
Jul 27, 2010. 2:57 PM REPLY
SkateboardingForLife says:
cool paracord is the bomb
Jun 17, 2009. 2:39 PM REPLY
Hunter O. says:
As is duct tape
Jul 21, 2010. 7:12 PM REPLY
your dog says:
amen
Mar 20, 2010. 6:24 PM REPLY
jdebaun says:
Jun 8, 2010. 9:42 AM REPLY If you're in a hurry I wouldn't recommend Supply Captain for paracord. I ordered some on May 11 and didn't get it until June 8. Almost a month.
cyndi513 says:
Can this knot be used for a survival bracelet? Thanks so much for all of your instructions!
May 13, 2010. 6:54 AM REPLY
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Stormdrane says:
May 13, 2010. 7:29 AM REPLY It can be tied as a paracord bracelet, but it is not easily untied, so I wouldn't recommend it as a 'survival' type paracord bracelet for carrying spare paracord.
Sacrifusion says:
Apr 4, 2010. 11:08 AM REPLY Seriously digging all of your work. Paracord is awesome! My main question here, and forgive if this was already asked, what is that little multi-tool you have on your keychain? I'm assuming the braided one next door is a bit driver? Keep on rock'n!
Stormdrane says:
Apr 6, 2010. 8:41 PM REPLY The multitool shown in one of the photos is a Swiss Tech Screwz All. The item with the spiral hitching is a cheap AAA LED flashlight.
lilpepsikraker says:
Aug 16, 2009. 10:14 PM REPLY I made one with an alternating square knot. I like how it "ladders" down because I didn't tighten it too much. 550 makes my hands sweat badly, too. I have it on a split ring, so I can attach my gadgets with a lanyard hole (phone, gps, swiss army knife, etc). third pic is my Signature in full showroom position. I like forest green cord. It looks cool. My Zippo made a lot of soot on the cord. I need a zplus.
RipperJack says:
Apr 6, 2010. 10:44 AM REPLY VERY NICE! I like this very much! I don't suppose you would create an "INSTRUCTABLE' showing how this "Alternating Square Knot" is created for this purpose, would you? Aug 16, 2009. 10:17 PM REPLY BTW, i have a Nokia 2610. Phone, text, wap. Thats it. It is probably the most durable phone I have ever owned(notice the scratches) I have thrown it at the wall pretty damned hard, and made dents in plywood with it. I paid $10 shipped from ATT as a "go phone", but I threw out the prepaid sim and put in my postpaid sim card. Thanks for the inspiring instructable! 5*
lilpepsikraker says:
kalmahot says:
muy bueno, practico, ahora se como utilizar mis cordones viejos, bueno, mejor compro nuevos y coloridos =).....
Apr 5, 2010. 12:00 PM REPLY
jeoncs says:
These are awesome. I do a lot of geocaching and these would be something unique to trade in them thanks!
Apr 4, 2010. 2:39 PM REPLY
karmagirl says:
Apr 4, 2010. 11:25 AM REPLY Amazing! I've spent the last 2 weeks on and off looking for a wrist strap for my PSP! I really like the Wii remote straps because they're adjustable but this Instructables definitely gave me ideas to make my own! Mar 24, 2010. 2:06 PM REPLY
krunal800 says:
Finally got some cord! (3 for 15 metres at cotswold). Didnt take too long, thanks for the instructable.
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
craziemutant says:
Feb 7, 2010. 2:24 PM REPLY This looks great and I'm gonna try when I get some cord. (While we're at it, where's the easiest place to get the para cord other than online?) I wanted to ask if you had or is there an instructable on that warp you have around your keychain flashlight? I have a little light and would love to add that to it. Thanks.
craziemutant says:
Feb 7, 2010. 2:58 PM REPLY Scratch that. I found it on your blog. I've never done knot tying before but they all look so cool! I want to make everything! Where's a good place to start learning from?
Stormdrane says:
Feb 7, 2010. 7:25 PM REPLY To get started, you can check your local library for books on knots or sift through online learning resources, here on Instructables, YouTube, and the continually growing amount of links that show up on Google. I have some links posted throughout my blog posts and in my links list. Other than online, you can search for local Army/Navy surplus stores to see if they carry paracord. Some sporting goods/outdoor stores may carry a variety of cord types used for hiking/camping/backpacking, but not always good quality 550 paracord.
craziemutant says:
Feb 8, 2010. 3:34 AM REPLY Thanks for the response. But about where to start I was more asking of what kind of simple knots to start out with. I probably could have initially been more specific. Thank you for the information and your blog.
Stormdrane says:
Feb 8, 2010. 7:03 AM REPLY What you want to start with is up to you, working knots or decorative knots. The following links have some of both, so look through them, have some rope or cord handy to try some of them out. Give Animated Knots by Grog and Andy's World of Knots a visit. They both have a combination of working and decorative knot tutorials with explanations of the knots and their uses. A couple more sites to check out: The International Guild of Knot Tyers for some begginers(working) knots and decorative knots(fancy knots) & The Most Useful Rope Knots for the Average Person to Know
samurai291 says:
Jan 28, 2010. 7:03 AM REPLY hello Stormdrane i am a big fan of your work really i mean it, a couple of time ago i took some of your pictures and mixed it with dido music,and made two or may be three videos.but i didn't meant to steal your work by any means,i just wanted to show your work,because it was brilliant,i am here to ask you that may i keep the video on my youtube profile or should i deleate it,i promise i would never waste time to delete it,if you want me to do so, i would be waiting for answer,thanx
Stormdrane says:
Jan 28, 2010. 12:22 PM REPLY You may keep the video up, provided you mention me(Stormdrane) as the source of the photos and provide a link back to me: http://stormdrane.blogspot.com and/or a link to the Instructable that the photos originally came from: http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/ You can put the info in the description/info for the video. Thank you. Regards David
samurai291 says:
Jan 31, 2010. 2:59 AM REPLY hello sir,thank you for reply,its genrous of you to let me keep the video,i would surely mention your name and url in the video discription right away,thanks a lot, have a nice day,and keep up the good work,we realy like your ideas and skills
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Jr Hacking kid says:
Dec 30, 2009. 10:08 PM REPLY Hay guys i fond a video! of this! Someone stole his Pics and made it to a vid i think this infridnges copyrights too stormdrane!!!!!!!!
-chase- says:
Seems that way to me too - no credit given to the author - photogs - musicians etc. kinda makes one think of another use for the snake knot - doesn't it? ;0) youtube will pull it once they discover it if the video maker doesn't give credit soon. live an learn i say.
Jan 25, 2010. 2:02 PM REPLY
-chase- says:
Jan 25, 2010. 2:11 PM REPLY ooops failed to mention - nice instrucable with good photos on how to make the snake knot. Your step-by-step photos on the knot made it easy for me to make. Thanks for taking the time to do so. -chase-
carllegend says:
hi
Aug 26, 2009. 1:25 AM REPLY
fallenspirit123 says:
this is awesome and you have a zippo witha Z-plus insert dont you? ;)
Jul 15, 2009. 4:40 PM REPLY
Stormdrane says:
Yep, the Z-plus insert for the Zippo lighter works well.
Jul 19, 2009. 7:08 PM REPLY
fallenspirit123 says:
cool, I might get a zplus insert to go with my biohazard zippo
Jul 20, 2009. 6:04 PM REPLY
jmalin says:
Jul 18, 2009. 6:49 PM REPLY Is the snake knot known by any other name? I didn't see it in the Ashley Book of Knots, which is my usual standby reference for knot-tying. A side note for those making neck lanyards: you not notice that the recommended additional 24" yields an additional *12* inches to the length of the loop as shown in step 3. That is, place the attachment at the 22" mark. I actually shortened this to 18", since what I'm hanging from the lanyard is pretty long itself. Or, you can leave it as specified and then put a shortening knot somewhere.
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
Stormdrane says:
Jul 19, 2009. 7:10 PM REPLY The 'snake knot' is more commonly known in 'Chinese' knotting. I don't know if there's an equivalent western version of the knot by another name.
tomtom88 says:
Jun 2, 2009. 9:16 PM REPLY Excellent Instructable! I've made countless cobra stitch bracelets since I first read your Instructable and finally tried this one out. Very clear instructions makes it really easy to follow! Great job! Now if only you could make an Instructable for a monkey's fist!
view all 86 comments
http://www.instructables.com/id/Paracord-wrist-lanyard-made-with-the-snake-knot/
