Security Level:
1+1 HSB-FD-SD Commissioning
www.huawei.com
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
CONTENT
Basic Knowledge 1+1 HSB 1+1 FD 1+1 SD
Basic Knowledge
1+1 Configuration
For RTN 620, the paired slots (slot5 and slot7) consist a 1+1 protection group; the
paired slots (slot6 and slot8) consist another 1+1 protection group.
Slot 5 and slot 6 is main slot respectively. For 1+1 HSB and SD application, It is only necessary to configure main IF board
parameters.
For 1+1 FD application, It is necessary to configure main parameters and standby
parameters respectively.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 3
Basic Knowledge
Trigger Conditions of the automatic HSB switching
Switching Conditions The hardware of the IF board is faulty. The hardware of the ODU is faulty. POWER_FAIL VOLT_LOSIF Board RADIO_TSL_HIGH RADIO_TSL_LOW RADIO_RSL_HIGH IF_INPWR_ABN CONFIG_NOSUPPORT R_LOC R_LOF R_LOS MW_LOF The IF connection cable is faulty.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
Description
At the same priority.
Basic Knowledge
Trigger Conditions of the automatic HSM switching
Switching Conditions R_LOC R_LOF R_LOS MW_LOF MW_FECUNCOR B1_SD (IDU 620 PDH) B2_SD (IDU 620 SDH ) MW_BER_SDIDU 605 2B/2F Low Medium High Description
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 5
Basic Knowledge
Hybrid Coupler with Waveguide Interface
Coupler Type Asymmetrical Hybrid Coupler(6dB)
Description with one main channel and one standby channel.
Application
Receive Power Main ODU port insertion loss, dB max:1.8 (38G: 2.0); Standby ODU port insertion loss, dB max: 7.2 (38G:7.4) ODU port insertion loss, db max:3.8 (38G:4.0).
Symmetrical Hybrid Coupler (3dB)
with equal attenuation in both channels
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 6
Basic Knowledge
Trigger Conditions and Antenna Aligning
Alarms R_LOF,R_LOS,MW_LOF are the microwave link alarm. While aligning antennas, the microwave link is not stable, will create these alarms. In order to finish antennas aligning quickly, for 1+1 application, we suggest turn off
the standby IF ODU-PWR switch at first, after antenna aligning finishing, turn on the standby IF ODU-PWR.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 7
Basic Knowledge
1+1 HSB/FD/SD Compare
Item Quantity of ODU Quantity of Antenna Quantity of Hybrid Coupler Quantity of Frequency Channel 2 1 1 1 HSB 2 1/2 1/0 2 FD 2 2 0 1 SD Notes
HSB/SD: main ODU type is same as standby. HSB/SD: Only configure main IF parameters. FD: Configure main and standby IF parameters respectively.
HSB Support HSM Support
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 8
CONTENT
Basic Knowledge 1+1 HSB 1+1 FD 1+1 SD
1+1 HSB Commissioning
1+1 HSB Commissioning Steps
Link 1+1 Configure Parameters Configure Turn off Standby IF ODU-PWR Switch
Align Antenna
Turn on Standby IF ODU-PWR Switch
1+1 Switch State and Test
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 10
1+1 HSB Commissioning
Link 1+1 Configure
To Next Page
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 11
1+1 HSB Commissioning
Link 1+1 Configure
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 12
1+1 HSB Commissioning
IP Parameters Configure
For 1+1 HSB, only configure main IF board parameters.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 13
1+1 HSB Commissioning
Query 1+1 HSB Switch State
Switch State
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 14
1+1 HSB Commissioning
1+1 Switch Control
Right Click
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 15
CONTENT
Basic Knowledge 1+1 HSB 1+1 FD 1+1 SD
1+1 FD Commissioning
1+1 FD Commissioning Steps
Link 1+1 Configure Parameters Configure Turn off Standby IF ODU-PWR Switch
Align Antenna
Turn on Standby IF ODU-PWR Switch
1+1 Switch State and Test
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 17
1+1 FD Commissioning
Link 1+1 Configure
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 18
1+1 FD Commissioning
IF Parameters Configure
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 19
1+1 FD Commissioning
IF Parameters Configure
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 20
CONTENT
Basic Knowledge 1+1 HSB 1+1 FD 1+1 SD
1+1 SD Commissioning
1+1 SD Commissioning Steps
Link 1+1 Configure IF Parameters Configure Turn off Standby IF ODU-PWR Switch Align main Antenna
Turn on Standby IF ODU-PWR Switch
Align Standby Antenna
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 22
1+1 SD Commissioning
1+1 Link Configure
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 23
1+1 SD Commissioning
Parameters Configure
For 1+1 SD, only configure main IF board parameters.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Confidential
Page 24
1+1 SD Commissioning
Turn off two side standby ODU's power, turn on two main ODU's power, firstly, align two main antennas.
: ODU Power on. X: ODU Power off.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 25
1+1 SD Commissioning
Turn on local site standby ODU's power, keep opposite site main antenna fixed, align local standby antenna towards opposite main one.
: ODU Power on. X: ODU Power off.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 26
1+1 SD Commissioning
Turn on opposite standby ODU's power, keep local main antenna fixed, align opposite standby antenna towards local main one.
: ODU Power on. X: ODU Power off.
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 27
Thank you
www.huawei.com
