Scribd
Upload
115 views1 page

ADSL Transformer Design Specifications

This document provides information about an ADSL transformer component from Delta Electronics, including: The transformer meets various industry standards and has low insertion loss and good harmonic distortion characteristics. It has a 100 ohm primary and secondary impedance and is compatible with several Broadcom ADSL chips. The mechanical construction details the manufacturer, date code location, and pin layout. Schematics show the primary, secondary, line and chip connections. Pad layout provides dimension details. Contact information for Delta Electronics in Taiwan is listed at the bottom.

Uploaded by

Hemant Jain
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views1 page

ADSL Transformer Design Specifications

This document provides information about an ADSL transformer component from Delta Electronics, including: The transformer meets various industry standards and has low insertion loss and good harmonic distortion characteristics. It has a 100 ohm primary and secondary impedance and is compatible with several Broadcom ADSL chips. The mechanical construction details the manufacturer, date code location, and pin layout. Schematics show the primary, secondary, line and chip connections. Pad layout provides dimension details. Contact information for Delta Electronics in Taiwan is listed at the bottom.

Uploaded by

Hemant Jain
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Telecom Components

ADSL Transformer
FEATURES
Design to meet UL/CSA/EN60950 requirements Qualified by Broadcom Good total harmonic distortion characteristics Low insertion loss Volume production and automated lines 100 ohm line impedance Meet RoHS

Broadcom ADSL recommendations


Part Number Manufacturer IC number Application Mechanicals Impedance (PRI : SEC) BCM6301/BCM6335 DT37-20920ASR Broadcom BCM6338/BCM6345 BCM6348/BCM6358 ADSL CPE SMD 100 : 100 : 5.53

MECHANICAL CONSTRUCTION
DT37-20920AS DELTAXXXX R XXXX: DATE CODE DOT ON PIN 1

SCHEMATICS
PRI
16 11 14 9
1

SEC
1

LINE

3 2 CHIP TX

A 16
0.5x1.55 TIN PLATED
4 5

7 CHIP RX 6

D
16.50
8 7 6 5 4 3 2 1

12.00

1.00

1.70 11.90

11

14

16

PAD LAYOUT

UNIT : mm / inch
A = 12.70 / 0.500 MAX B = 13.84 / 0.545 MAX C = 15.60 0.20 / 0.614 0.007 D = 1.70 0.254 / 0.067 0.010 E = 15.24 / 0.600 (TYP)

DELTA ELECTRONICS, INC.


(TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEI SAN INDUSTRIAL ZONE, TAOYUAN SHIEN, TAIWAN, R.O.C.

TEL: 886-3-3591968; FAX: 886-3-3591991 Http://www.deltaww.com/products/networking

You might also like