0% found this document useful (0 votes)
45 views2 pages

Caledonian: European Installation Bus (EIB) Cables

The document describes Caledonian European Installation Bus (EIB) cables. EIB cables allow integration of building management systems over a common system to automatically control lighting, blinds, heating and ventilation. They can be installed in various areas of a modern building to reduce required cabling. The cables meet the European Standard EN 50090 and have PVC insulation and outer sheath. They consist of solid copper conductors in a twisted quad or pair configuration with an aluminum/polyester foil screen and tinned copper drain wire.

Uploaded by

rose chen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
45 views2 pages

Caledonian: European Installation Bus (EIB) Cables

The document describes Caledonian European Installation Bus (EIB) cables. EIB cables allow integration of building management systems over a common system to automatically control lighting, blinds, heating and ventilation. They can be installed in various areas of a modern building to reduce required cabling. The cables meet the European Standard EN 50090 and have PVC insulation and outer sheath. They consist of solid copper conductors in a twisted quad or pair configuration with an aluminum/polyester foil screen and tinned copper drain wire.

Uploaded by

rose chen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Caledonian

European Installation Bus(EIB) Cables

PVC Insulation, PVC Outer Sheath European Installation Bus(EIB) Cables


EIB Y(St)Y 2x2x0.8

PVC Outer Sheath PVC Insulation Solid Copper Conductor

Overall AL/Polyester Tape With Tinned Copper Drain Wire

APPLICATION EIB installation consists of sensors and actuators. The E.I.B. concept allows intergration of Building Management Systems (B.M.S.) over one common system. Lighting, blinds, heating and ventilation can be automatically controlled through the E.I.B cable. This dramatically reduces the cabling required in a modern building. They can be installed over, in, or below the plaster, in pipes and pipe ducts, in dry, moist, and wet areas, as well as outside, provided they are protected against direct exposure to the sun.

STANDARDS
Basic design to European Standard EN 50090

CABLE CONSTRUCTION Type/Cable Construction Inner Conductor Conductor Insulation Insulation Colour Stranding Element Screen Drain Wire Outer Sheath 1 Quad Plain copper conductors 0.8mm PVC White,yellow,red,black Cores twisted into a quad Aluminium/polyester foil screen Solid copper PVC 2 Pair Plain copper conductors 0.8mm PVC White/yellow, red/black Cores twisted into pairs, pairs laid up Aluminium/polyester foil screen Stranded tinned copper PVC

ADDISON

ADDISON
cOLOUR Code
Insulation Colour: Pair1: Red/Black; Pair2: White/Yellow Sheath Colour: Green

Electrical Properties
Test Voltage Working Voltage Conductor resistance Insulation resistance Mutual capacitance@800Hz Unbalanced capacitance 4000V MaX.150V 37.0 Ohm/km @ 20C 100Mhms*km @ 20C 100nF/km max 300pF/100m maX

TECHNICAL DATA:
Approx.Weight (kg/km) Nominal diameter(mm) Min. Bending Radius (Laying) Operating temperature, min Operating temperature, max
150V

62 6.1 10 x OD mm -20C(fixed) +70C(fixed)

57 6.1 10 x OD mm -5C (installation) +50C (installation)

N
EN 50090 Standard

Rated Voltage

10

Caledonian

www.caledonian-cables.co.uk

www.addison-cables.com

You might also like