Scribd
Upload
74 views3 pages

Temperature Vs Length

The document shows graphs of temperature vs length for copper and mild steel samples heated at different wattages. For copper, increasing the wattage from 200W to 300W decreases the length required to reach a given temperature. Mild steel heated at 200W requires a greater length than copper to reach the same temperature. Linear trend lines are fitted to each data set.

Uploaded by

ukhyeon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
74 views3 pages

Temperature Vs Length

The document shows graphs of temperature vs length for copper and mild steel samples heated at different wattages. For copper, increasing the wattage from 200W to 300W decreases the length required to reach a given temperature. Mild steel heated at 200W requires a greater length than copper to reach the same temperature. Linear trend lines are fitted to each data set.

Uploaded by

ukhyeon
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Temperature vs Length

Copper (200W)

Copper (300W)

Mild Steel (200W)

Linear (Copper (200W))

Linear (Copper (300W))

Linear (Mild Steel (200W))

190

170

Temperature (C)

150

y = -1.0037x + 333.78
130

110

y = -1.8504x + 402.36
90

y = -0.6627x + 228.57
70
140

150

160

170

180

190

Length (mm)

200

210

220

230

240

length (copper)
temp(200W)
temp(300)
152.5
127.75
181
171.55
114.5
161.25
209.65
89.75
123.25
228.7
77
104.4

length(steel)
temp
142.9
138
149.25
126.5
161.95
101.5
168.3
91.75

Qc

A
3.438 2029.225
3.925 754.7676
4.096 754.7676

QH-Qc
0.5
5.82
0.5
3.54
0.5
10.41

195.18
196.46
295.59
QH
201
200
306

u
dT
u
1.996089
46.25
1.217367
50.75
1.217367
76.6
u
% error
3.474168 2.895522
3.956719
1.77
4.126405 3.401961

dx
0.177
0.177
0.177

u
25.4
76.2
76.2

0.25
0.25
0.25

dT/dx
-1.8504
-0.6627
-1.0037

u
%
51.9804 1.068775 2.056113
392.7751 8.094165 2.060764
390.1868 5.664056 1.451627

k theory
54
401
401

% error
3.740005
2.051108
2.696565

You might also like