SP SERIES HYDRAULIC GEAR PUMP

OUTSTANDING FEATURES
Patented Non-Symmetrical Gears The adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear compartment has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise. U.S.A. U.K. French German Patent No. Patent No. Patent No. Patent No. 3817117 1400577 7230448 7231801 Double pumps: Available in SP20, SP25 and SP25/SP20 Combinations. Maximum speed from 3000 to 4000 RPM using SAE 10W oil. Displacement covers .400 in3/rev. to 3.869 in3/rev. Inlet pressure: Pump inlet should not exceed 5 in. of mercury vacuum or 14 P.S.I. positive pressure. Ports: SAE straight thread O-ring boss for SP20 & SP25. Other Ports available - consult factory. (Taper pipe threads not available. Working oil: A mineral based oil with additives to resist corrosion, oxidation, and foaming is recommended. Viscosity at any running condition should be 60 SUS minimum and 250 SUS maximum. 180o F is the maximum recommended system operating temperature. Filtration: Per ISO cleanliness code level 17/14. As a minimum, 10 micron filtration is recommended.

Others: Pending

Bearings PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination. Engineering tests on the PTFE bearings indicate they will withstand bearing loads over twice as high as conventional steel backed aluminum bearings used in many pumps. The PTFE resin layer will absorb a high degree of contamination with out damage to the pump. Also since the PTFE layer is self lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. The side benefit from reduced friction under all conditions is a reduced consumption of power. Gears and drive shaft are hardened alloy steel of one piece construction. Special gear design: Non-symmetrical gear insures low noise and compactness. Highest Quality Workmanship. Pressures Up To 3000 P.S.I. Dependable service: Balanced pressure loading insures small dispersion, good durability and maintains high performance. Extremely Efficient. Perfect alignment: Through bore design provides perfect alignment of pump element and assures even bearing load. With the aluminum alloy casing, the SP Series features light weight and easy handling.

INTERNAL COMPONENTS BREAKDOWN

SP20 SERIES HYDRAULIC PUMPS AND NOISE GENERATION

The accompanying graphs show the typical Pump Sound Pressure Ratings (PSPR, A-weighted Sound Pressure Levels) for the SP20 Series Hydraulic Pumps. The Pump Sound Pressure Ratings (PSPR) shown below in the graphs were computed and determined using Sound Intensity Analysis Methods. Sound Intensity Analysis provides the most accurate and reliable data for predicting and comparing a Pump Sound Pressure Rating (Aweighted Sound Pressure Level), for a pump exposed to various operating and environmental conditions. Pumps tested below in the graphs were tested as defined by ANSI/B93.71M, (Hydraulic fluid power-Pumps-Test code for the determination of airborne noise levels) in a semi-anechoic room. For free-field conditions (i.e. such as a noise source located above the ground in a open area), pump sound pressure ratings (A-weight Sound Pressure Levels) may be estimated by subtracting 3dB(A)from the values shown on the graphs.
PUMP SOUND PRESSURE RATING (PSPR) A-WEIGHTED SOUND PRESSURE LEVEL (SPL. dBA at lm) PUMP SOUND PRESSURE RATING (PSPR) A-WEIGHTED SOUND PRESSURE LEVEL (SPL. dBA at lm) SP20 SERIES PUMP NOISE LEVELS 1800 RPM OPERATING SPEED SP20 SERIES PUMP NOISE LEVELS 3000 RPM OPERATING SPEED

75 70 65 60 55 50 5 10 15 20 25 30 35
PUMP DISPLACEMENT cc/REV 500 PSI 1500 PSI 2500 PSI 3000 PSI (34 bar) (103 bar) (172 bar) (207 bar)

85 80 75 70 65 60 55 5 10 15 20
500 PSI 1500 PSI 2500 PSI 3000 PSI (34 bar) (103 bar) (172 bar) (207 bar)

25

30

35

PUMP DISPLACEMENT cc/REV

Pump acoustical data was determined in accordance with ANSI/B93.71M. Hydraulic fluid power-Pumps-Test code for the determination of airborne noise levels
CATP 9-09-04-01

PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com E-MAIL: [email protected] O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (712) 233-2181

P9

PUMPS AND MOTORS

SP20 SERIES SAE A FLANGE PUMP

New Updated Design

More Port Options More Shaft Options Lower Price Contact your sales representative for more information

The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying capabilities and cavitation resistance even at low speeds and moderate levels of contamination. Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced. This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

MODEL CODE
SP20B 14 A 9 H 2R
SERIES NO DISPLACEMENT CODE (CC/REV) PORT LOCATION A-SIDE INLET AND OUTLET C-BOTH SIDE AND REAR W/STEEL PLUGS D-REAR INLET AND OUTLET OUTLET E-BOTH SIDE AND REAR W/PLASTIC PLUGS ROTATION (FACING END OF SHAFT) L-COUNTER CLOCKWISE R-CLOCKWISE DRIVE SHAFT DRIVE SHAFT 9-SAE 9 TOOTH 16/32 SPLINE 2-SAE 5/8 STRAIGHT KEYED 3-11 TOOTH 16/32 SPLINE* 4-3/4 STRAIGHT KEYED* 5 -SAE 10 TOOTH 16/32 SPLINE MOUNTING H-SAE A 2 BOLT *REQUIRED FOR DISPLACEMENT CODES 30 AND 33

PORT TYPE 9-STANDARD PORTS SAE PER CHART BELOW OPTIONAL PORTS CONSULT FACTORY SIDE PORT ONLY 8-METRIC O-RING 7-BSPP 6-SAE SPLIT FLANGE 16-33 CC ONLY 5-METRIC SPLIT FLANGE 16-33 CC ONLY

SPECIFICATIONS
MODEL NUMBER DISP. IN3/REV RATED PRESSURE (PSI) 3000 3000 3000 3000 3000 3000 3000 2500 2500 2500 2500 MAXO RPM A B

INLET PORT
SAE SIZE SIDE REAR FULL THREAD DEPTH

OUTLET PORT
SAE SIZE SIDE REAR FULL THREAD DEPTH WT. (LB.)

7/8-14

1 5/16-12 UN-2B

5/8

3/4-16 UN-2B

1/16-12 UN-2B

9/16

SP20B06 SP20B08 SP20B09 SP20B11 SP20B14 SP20B16 SP20B20 SP20B23 SP20B27 SP20B30 SP20B33
o

.400 .499 .589 .677 .860 .976 1.220 1.403 1.654 1.881 2.014

4000 4000 4000 4000 4000 4000 3500 3500 3500 3500 3500

1.79 1.83 1.87 1.91 1.99 2.04 2.15 2.23 2.34 2.41 2.49

4.22

5.0

UN-2B

4.30 1 1/16-12 4.38 4.46 4.62 4.71 4.93 1 5/16-12 5.09 5.31 5.46 5.62
UN-2B 1 5/16-12 UN-2B UN-2B

3/4

7/8-14 UNF-2B 5/8

5.1 5.3 5.5 5.7 1 1/16-12 UN-2B 6.0 6.2 3/4 6.4 6.6 7.1 7.6

PUMPS AND MOTORS

3/4

1 1/16-12 UN-2B

Max. RPM for side ported models. Rear ported models should be restricted to 21 gpm. Standard Seal Kit for all SP20 Models is Prince Part No. PMCK-SP20.
PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com E-MAIL: [email protected] O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (712) 233-2181
CATP 10-09-04-01

P10

SEE PAGE 25 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING

4.188 3.75 DIA. 1.88 .45 4.188 3.75 DIA.

A .55

(REAR PORTED MODELS)

SP20 SERIES DIMENSIONAL DATA

3.250 DIA. 3.2481.25* .25 .55 A B MAX. .64 INLET/OUTLET PORT 4.25 OUT (REAR PORTED MODELS)
IN

2.77 1.88 .45

3.250 DIA. 3.248

INLET/OUTLET PORT (SIDE PORTED MODELS) .64

3.43 4.25
OUT IN

2.77

*NOTE 11 TOOTH SPLINED SHAFT (SHAFT CODE 3) WILL HAVE A 1.49 SHAFT EXTENSION. 10 TOOTH SPLINED SHAFT (SHAFT CODE 5) WILL HAVE A 1.37 SHAFT EXTENSION.

INLET/OUTLET PORT (SIDE PORTED MODELS)

3.43

.1573 .1563 .698 .688 .625 .624 .1573 .1563 .698 .688

KEYED SHAFT
SHAFT CODE 2

.1885 .1875 .826 .834 .750 .749 .1885 .1875

SHAFT CODE 4

SPLINED SHAFT
SHAFT CODE 5 10 TOOTH 16/32 DP 30O PA
FLAT ROOT SIDE FIT

SHAFT CODE 9 9 TOOTH 16/32 DP 30O PA

FLAT ROOT SIDE FIT

SHAFT CODE 3 11 TOOTH 16/32 DP 30O PA

FLAT ROOT SIDE FIT

KEYED SHAFT
SHAFT CODE 2

SHAFT CODE 4

.826 TYPICAL PERFORMANCE DATA .834 .750 .749

.625
.624

RPM 1000 1.62 3.77 1.91 4.38 2.30 5.03 2.74 5.77 3.36 7.09 3.82 7.86 4.92 9.98 5.72 9.68 6.90 11.59 7.78 12.56 8.47 13.40 1500 2.48 5.66 2.97 6.53 3.52 7.54 4.16 8.75 5.19 10.51 5.87 11.87 7.49 14.89 8.73 14.44 10.47 17.20 11.47 18.38 12.60 19.98 2000 3.35 7.57 4.04 8.83 4.75 10.14 5.63 11.63 7.01 14.19 7.93 15.87 10.05 20.10 11.60 19.21 13.90 23.00 15.36 24.64 16.86 27.04 2500 4.24 9.45 5.10 11.13 5.97 12.84 7.05 14.80 8.91 18.00 9.98 20.17 12.70 25.16 14.68 24.27 17.52 28.98 19.22 30.93 21.11 33.90 3000 5.10 11.13 6.16 13.57 7.19 15.54 8.51 17.87 10.74 21.68 12.11 24.33 15.26 30.52 17.61 29.48 20.94 34.78 23.03 37.59 25.26 41.05 3500 5.98 7.27 8.46 4000 6.92 8.33 9.74

PRESSURE (PSI)

MODEL SP20B06 SP20B08 SP20B09 SP20B11 SP20B14 SP20B16 SP20B20 SP20B23 SP20B27 SP20B30 SP20B33
CATP 11-09-04-01
FLOW (GPM) INPUT HORSE POWER FLOW (GPM)

500 .78

1.85 .88 2.23 1.03 2.61 1.27 2.98 1.61 3.68 1.80 4.01 2.35 5.21 2.80 5.06 3.30 5.98 3.85 6.40 4.13 7.14

13.06 14.80 16.17 18.69 18.43 21.31 9.98 11.40 21.12 24.38 12.56 14.39 25.49 29.43 14.24 16.22 17.76 35.73 20.55 34.54 24.46 41.13 26.86 43.80 29.52 47.89 2500 28.78 34.12 3000

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER

Typical Performance Data Based on 140 SUS Oil at 120o F

PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com E-MAIL: [email protected] O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (712) 233-2181

P11

PUMPS AND MOTORS

SP25 SERIES SAE B FLANGE PUMP

MODEL CODE

SERIES NO DISPLACEMENT CODE (CC/REV) PORT LOCATION
A-SIDE INLET AND OUTLET D-REAR INLET AND OUTLET C-BOTH SIDE AND REAR INLET AND OUTLET, STEEL PLUGS E-BOTH SIDE AND REAR INLET AND OUTLET, PLASTIC PLUGS 9-STANDARD PER CHART

SP25A 38 A 9 H 1-R X
SHAFT SEAL TYPE
OMIT FOR STANDARD BUNA-N H-MEDIUM PRESSURE BUNA-N

ROTATION (FACING END OF SHAFT)

L-COUNTER CLOCKWISE R-CLOCKWISE

DRIVE SHAFT
1-SAE 13 TOOTH 16/32 SPLINE 2-SAE 7/8 STRAIGHT KEYED

PORT TYPE

MOUNTING
H-SAE B 2 BOLT

SPECIFICATIONS
MODEL DISP. RATED MAXO A B SAE SIZE FULL SAE SIZE RPM NUMBER IN3/REV PRESSURE THREAD (PSI) SIDE REAR DEPTH SIDE REAR
1 5/16-12 UN-2B 1 1/16-12 UN-2B 1 5/16-12 UN-2B INLET PORT OUTLET PORT FULL THREAD DEPTH 3/4 WT. (LB.) 10.4 10.6 11.0 12.4 13.5 13.9 14.4 15.4

PUMPS AND MOTORS

SP25A19 SP25A22 SP25A27 SP25A32 SP25A38 SP25A44 SP25A52 SP25A63

o

1.141 1.349 1.660 2.008 2.318 2.697 3.179 3.869

3000 3000 3000 3000 3000 3000 2500 2500

3000 3000 3000 3000 3000 3000 3000 3000

2.49 5.50

1 5/16-12

3/4

1 1/16-12 UN-2B

2.55 5.62 2.74 5.99 2.83 6.17 2.94 6.38 3.07 6.66

2.64 5.79

1 5/8-12 UN-2B UN-2B

3.27 7.05 1 7/8-12

Max. RPM for side ported models. Rear ported models should be restricted to 25 GPM due to limitation on the inlet port size. Standard Seal Kit for all SP25 Models is Prince Part No. PMCK-SP25.
PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com E-MAIL: [email protected] O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (712) 233-2181
CATP 12-09-04-01

P12

SEE PAGE 25 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING

5.750

SP25 SERIES DIMENSIONAL DATA A

4.74 DIA.

.37

1.63

B MAX.

.44

INLET/OUTLET PORT (REAR PORTED MODELS)

2.37 .55
5.750 4.74 DIA.

.37 .44

1.63 A 4.000 DIA. 3.998

B MAX. .79

INLET/OUTLET PORT (REAR PORTED MODELS)

OUT IN

5.10

2.37 .55

3.34 4.000 DIA. 3.998 INLET/OUTLET PORT (SIDE PORTED MODELS) .79

OUT

IN

3.34

5.20

5.10

INLET/OUTLET PORT (SIDE PORTED MODELS)

5.20

.250 .251

KEYED SHAFT
SHAFT CODE 2

SPLINED SHAFT
SHAFT CODE 1 13 TOOTH 16/32 DP 30O PA FLAT ROOT SIDE FIT

.250 .251 .875 .874

KEYED SHAFT .982 .004

SHAFT CODE 2
.982 .004

.875 .874

TYPICAL PERFORMANCE DATA

RPM PRESSURE 1500 2000 2500 3000 (PSI) 6.90 13.96 8.22 16.38 10.27 20.22 12.43 24.22 14.09 27.54 16.44 32.01 19.67 32.38 23.86 39.45 9.39 18.70 11.08 21.96 13.70 26.97 16.73 32.46 19.08 36.85 22.16 43.18 26.42 43.55 31.93 52.85 11.89 23.45 13.94 27.36 17.22 33.96 21.14 40.95 24.07 46.90 27.89 54.71 33.17 55.09 40.00 66.62
o

MODEL 500 1000 SP25A19 SP25A22 SP25A27 SP25A32 SP25A38 SP25A44 SP25A52 SP25A63
CATP 13-09-04-01
FLOW (GPM)

2.09 4.65 2.64 5.58 3.33 6.99 3.91 8.24 4.26 8.56 4.99 10.42

4.55 9.31 5.28 10.98 6.75 13.48 8.22 15.98 9.10 18.24 10.86 21.22 12.92 21.96 15.60 26.43

14.24 28.29 16.81 33.31 20.74 40.95 25.44 49.94 28.77 56.57 33.61 66.25 39.63 67.00 48.08 80.77 2500 3000

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

INPUT HORSE POWER FLOW (GPM)

HORSE POWER FLOW (GPM)

6.16 INPUT 11.17 7.52 14.14

INPUT HORSE POWER

Typical Performance Data Based on 140 SUS Oil at 120 F.

PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS P.O. BOX 7000 NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com E-MAIL: [email protected] O.E.M. CUSTOMER SERVICE: (605) 235-1220 FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 FAX (712) 233-2181

P13

PUMPS AND MOTORS