Scribd
Upload
758 views1 page

Compressor Oil

Petromin Compressor Oils are formulated to meet the demands of modern high-efficiency air compressors. They are designed to lubricate cylinders and crankcases, minimizing carbon and sludge deposits that require frequent cleaning of valves, ports, and intercoolers. Petromin Oils are recommended for single-stage compressors up to 125 PSI, two-stage up to 300 PSI, and multi-stage compressors with discharge temperatures up to 220°C. Benefits include longer intervals between cleaning, reduced fire and explosion risks, and single oil that lubricates the entire compressor.

Uploaded by

Wasimraja Nanjwani
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
758 views1 page

Compressor Oil

Petromin Compressor Oils are formulated to meet the demands of modern high-efficiency air compressors. They are designed to lubricate cylinders and crankcases, minimizing carbon and sludge deposits that require frequent cleaning of valves, ports, and intercoolers. Petromin Oils are recommended for single-stage compressors up to 125 PSI, two-stage up to 300 PSI, and multi-stage compressors with discharge temperatures up to 220°C. Benefits include longer intervals between cleaning, reduced fire and explosion risks, and single oil that lubricates the entire compressor.

Uploaded by

Wasimraja Nanjwani
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

COMPRESSOR OIL

Description

Petromin Compressor Oils series has been developed to meet the latest changes in air compressor designs, resulting in increased capacity and efficiency. It is formulated from a highgrade base stock with a narrow distillation range, containing specially selected additives, which enhance lubricity, anti-wear properties, and protect compressor parts against rust. It is designed to lubricate both cylinders and crankcases. It minimizes carbon and sludge deposits, thereby extending time between service intervals for cleaning valves, ports and intercoolers.

Application

Petromin Compressor Oil Series is specially suited for Single-stage reciprocating compressors up to 125 PSI, Two-stage reciprocating compressors up to 300 PSI and Multi-stage reciprocating compressors after break-in with air discharge temperature up to 220C.

Longer intervals between cleaning of valves, heat exchangers ports and piping ensures lower maintenance cost. Less carbon and deposit formation reduces fire and explosion hazards. Single oil, lubricates cylinders and crankcase. Suitable for both large and small compressors.

Benefits

Performance Level
DIN............................ 51506 VDL

Product Characteristics*
PROPERTIES ISO Grade Specific Gravity @ 15 C Viscosity @ 40 C @ 100 C UNITS - - mm2/s mm /s
2

VALUE 32 46 68 100

TEST METHOD DIN 51 511

0.878 0.879 0.884 0.888 ASTM D-4052 32.0 46.0 68.0 100.2 ASTM D-445 5.4 6.76 8.6 11.2 ASTM D-445 102 100 97 97 ASTM D-2270

Viscosity Index Flash Point, COC Pour Point Color Rust Test CRC % mass of 20% dist.

- C C - - -

210 242 248 255 ASTM D-92 -12 -9 -9 -12 ASTM D-97

1.0 1.5 2.0 2.5 ASTM D-1500 Pass Pass Pass Pass ASTM D-665 0.3 0.3 0.3 0.3 DIN 51356

Product Code

5660 5670 5680 5690 -

*The information and figures given here are typical of current production and conform to specifications, minor variations may occur.

81

You might also like