Scribd
Upload
247 views2 pages

Stiffener Local Check Sample

This document provides input data for designing a stiffener plate including material properties, beam dimensions, axial force, and minimum sizing requirements for the stiffener plate. It then calculates section properties of the stiffened beam including area, moments of inertia, radius of gyration, and checks the capacity of the section under an axial force based on two equations. The capacity is determined to be 204.72 N/mm^2 which exceeds the actual axial stress of 25.77 N/mm^2, indicating the section is adequate.

Uploaded by

Aulia Mirza
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
247 views2 pages

Stiffener Local Check Sample

This document provides input data for designing a stiffener plate including material properties, beam dimensions, axial force, and minimum sizing requirements for the stiffener plate. It then calculates section properties of the stiffened beam including area, moments of inertia, radius of gyration, and checks the capacity of the section under an axial force based on two equations. The capacity is determined to be 204.72 N/mm^2 which exceeds the actual axial stress of 25.77 N/mm^2, indicating the section is adequate.

Uploaded by

Aulia Mirza
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN CHECK OF STIFFENER PLATE INPUT DATA Deck Beam Flange Insert Modulus of Elasticity Yield Stress Depth

Width Web Thickness Flange Thickness E Fy d b tw tf W8x48 200000 345 215.9 205.99 10.16 17.4 Mpa Mpa mm mm mm mm Equivalent units 29007.60 Ksi 50.04 8.50 8.11 0.40 0.69 Ksi inch inch inch inch

Axial Force,

P=

50

kN

Stiffener Plate

Fyst =

345

Mpa

50.04

Ksi

Stiffener Minimum Size:

1 2

Width b / 3 + tf / 2 Thickness thickness of flange or plate delivering the load

73.74 8.7

mm mm

2.90 0.34

in. in.

Check for Compression Y Beam Web Stiffener Plate X tw 25tw Effective web

0.75h

Stiffener Plate Size 0.75 h = 25 tw = 135.825 mm 254 mm Width Thickness 2 x Area = = = 97 10 1940 > 73.74 OK > 8.7 OK mm2

Section Properties: Cc = KL = 0.75h = 106.97 135.825 mm

4 Inertia of Section Ix = 1.54E+06 mm 4 Inertia of Section Iy = 1.39E+07 mm

Total Area A = Least Radius of Gyration r = ( I/A )1/2 KL/r =

1940 28.20 4.82

mm2 mm

Eq. E2-1 ( kL/r < Cc ) 1Fa = (kL/r)2 2Cc2 Fy (kL/r)3 8Cc3 204.72 25.77 397.15 89.28

Eq. E2-2 ( kL/r > Cc ) Fa = 12 2 E 23 (kL/r)2

3(kL/r) 5 + 8Cc 3

Allowable Axial Stress Fa = Actual Axial Stress fa= Capacity at Section = AxFa =

N/mm2 N/mm2 kN kips U.C.= 0.13

You might also like