Scribd
Upload
721 views

Catia Tips & Tricks

The document provides a methodology to overcome errors when inserting PDFs into CATIA V5 drafting workbench. It describes how a black box appears when inserting PDFs and remaining after saving and reopening. The solution is a 3 step process: 1) Open the Registry Editor and add a new "Maximum Allowed Allocation Size" key, 2) Edit the DWORD value of the new key, 3) Restart the machine and re-insert the PDF which will now appear correctly even after saving and reopening.

Uploaded by

churanjit
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
721 views

Catia Tips & Tricks

The document provides a methodology to overcome errors when inserting PDFs into CATIA V5 drafting workbench. It describes how a black box appears when inserting PDFs and remaining after saving and reopening. The solution is a 3 step process: 1) Open the Registry Editor and add a new "Maximum Allowed Allocation Size" key, 2) Edit the DWORD value of the new key, 3) Restart the machine and re-insert the PDF which will now appear correctly even after saving and reopening.

Uploaded by

churanjit
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

www.edstechnologies.

com



METHODOLOGY TO OVERCOME ERROR WHILE INSERTING
PDF IN CATIA V5


Scenario:-

When pdf is inserted in Catia V5 drafting workbench black box appears as shown
below.

Initially How to insert pdf in Catia V5 drafting workbench is as mentioned below.

Insert---Object---Create New---Adobe Acrobat document---Select the document to
insert.




Even many times the pdf image appears OK in Catia V5 immediately when inserted,
but after saving the particular file and reopening the same black box appears as
shown above.





www.edstechnologies.com





Below mentioned is the solution to overcome this problem.

Solution:-To overcome this problem we need follow the following steps mentioned
below

1) Go to Start---Run and type Regedit, the window for Registry Editor will appear
as shown below.












www.edstechnologies.com




2) In the Registry editor window go to HKEY_LOCAL_MACHINE---Microsoft---
Ole and add a new registry key as shown below i.e. Maximum Allowed Allocation
Size



3) To modify the DWORD value we need to right click Maximum Allowed
Allocation Size which is created and than the Edit DWORD Value dialog box
appears as shown above enter the value as shown.

4) After doing the above mentioned Steps Restart the machine and insert the pdf
again as per steps mentioned above you can see that the inserted pdf appears OK,
even if the drawing is saved and reopened again.

Compiled By

Kiran S. Bhokare

Mobile: 90963 08122 | email: [email protected]

EDS Technologies Pvt Ltd
"Shivteerth Building 2
nd
Floor
1201-C/A, Fergusson College Road - 400 102,
Pune India.
Tel: 25539871, 25539872 Fax: 25539873
www.edstechnologies.com
TOLL-FREE - Tech-Support Calls: 1800-425-337

You might also like