Scribd
Upload
424 views6 pages

O Ring Groove Calculator

This document provides specifications for O-ring groove sizing, including dimensions for maximum and minimum diameters, lengths, widths, and radii. It can be used in conjunction with another document on an O-ring sizing spreadsheet. The spreadsheet then shows an example selection and dimensions for a specific O-ring groove configuration in either a cylinder or piston housing. Notes provide additional guidance on techniques for higher operating pressures over 1500 psi.

Uploaded by

bewnigol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
424 views6 pages

O Ring Groove Calculator

This document provides specifications for O-ring groove sizing, including dimensions for maximum and minimum diameters, lengths, widths, and radii. It can be used in conjunction with another document on an O-ring sizing spreadsheet. The spreadsheet then shows an example selection and dimensions for a specific O-ring groove configuration in either a cylinder or piston housing. Notes provide additional guidance on techniques for higher operating pressures over 1500 psi.

Uploaded by

bewnigol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

With The Name of Allah the G

This Spreadsheet is to be Used in conjunction with: http://www.scribd.com/doc/26708233/O-ring-Groove-Sizing

Size No.

Max
004-028
110-149
210-274
325-349
425-460

Ich
0.070
0.103
0.139
0.210
0.275

MM
1.78
2.62
3.53
5.33
6.99

Groove Length
E.005"

Radial Width F

Cross Sec. Dia.


Ich
0.062
0.094
0.125
0.188
0.250

Min
MM
1.57
2.39
3.18
4.78
6.35

Ich
0.060
0.091
0.122
0.184
0.245

K min
MM
1.52
2.31
3.10
4.67
6.22

Ich
0.094
0.141
0.188
0.281
0.375

Selection:
O-ring No.=
Cross Sec.=
Inside Dia.=
Outside Dia. =
E=
Fmax =
Fmin =
G=
2T=

2-277
3.53
291.69
298.75
4.78
3.18
3.1
0.15
8.13

mm
mm
mm
mm
mm
mm
mm
mm
mm

Groove in Cylinder
Shaft Dia.=
Groove Dia. Max =
6.36
Groove Dia. Min =
6.20
Housing Inner Dia. =
0.30
Lead in Dia. =
-9.90

# Fill in the orange box

mm
mm
mm
mm
mm

Groove in Piston
Housing Inner Dia.=
304.00
Groove Dia. Max =
297.80
Groove Dia. Min =
297.64
Shaft Dia. =
303.70
Housing Lead Dia. =
305.93

Dimension of Groove Radii


0.01 inch =
0.254 mm
0.02 inch =
0.508 mm

Note: You can combine either the groove in piston or groove in cylinder technique with the
groove in flange for operating pressure more than 1500psi (instead of using one o-ring, use
two or more o-ring for P>1500psi)

Name of Allah the Gracious, The Merciful

26708233/O-ring-Groove-Sizing
Groove Length
E.005"

Max Diametral
Clearance, G

Flange Groove Depth


Chamfer M+.005 (-0)
H.005

2T

K min
MM
2.39
3.58
4.78
7.14
9.53

mm
mm
mm
mm
mm

echnique with the


ng one o-ring, use

Ich
0.005
0.005
0.006
0.007
0.008

MM
0.13
0.13
0.15
0.18
0.20

Ich
0.170
0.240
0.320
0.460
0.600

MM
4.32
6.10
8.13
11.68
15.24

Ich
0.056
0.086
0.115
0.175
0.236

MM
1.42
2.18
2.92
4.45
5.99

Ich
0.095
0.145
0.195
0.295
0.395

MM
2.41
3.68
4.95
7.49
10.03

Max Radius R
Ich
0.030
0.040
0.060
0.090
0.100

MM
0.76
1.02
1.52
2.29
2.54

You might also like