Scribd
Upload
71 views2 pages

Set The Mixed - and Cleaning Speed

The document provides instructions for setting speeds and using the menu structure on a keypad KP200. The keypad menu has four main sections - Actual Values, Parameter Selections, Drive Control, and Smart Card. Users can use arrow keys to navigate menus, change parameter groups, and toggle between parameters. Settings are made by selecting parameters and increasing or decreasing values.

Uploaded by

guhandoss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
71 views2 pages

Set The Mixed - and Cleaning Speed

The document provides instructions for setting speeds and using the menu structure on a keypad KP200. The keypad menu has four main sections - Actual Values, Parameter Selections, Drive Control, and Smart Card. Users can use arrow keys to navigate menus, change parameter groups, and toggle between parameters. Settings are made by selecting parameters and increasing or decreasing values.

Uploaded by

guhandoss
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

KLOCKNER Development / design control

DESMA



Set the mixed - and cleaning speed

rge20x1 over KP200

When you adjust the speeds is to ensure the correct
direction of rotation. the worm drive the speed must be
indicated by a minus sign, since the direction of rotation,
starting from the motor shaft, is levorotatory.
Generally:
(2) 3-digit digits display, eg., for
parameter number
(3) Current Menu
(4) 5-digit display for parameter
name and value
(5) Acceleration or braking ramp
active.
(6) Bar graph display, 10 digits

Call menuzweige or parameters; store changes, start at
drive-control.

Leave Menuzweige, cancel changes, control stop for
drive.

Menu, choose a subject area or parameter; setting
increase.

Menu, choose a subject field parameters; increase
setting.





Development / design control


The keypad KP200 has the below menu structure for easy
clear about


VAL PARA CTRL CARD

Actual Values Subject Smart Card
Selections Selections Read
Show Parameter Drive
Selections Control Write

utilization indicator Other Write Protection

Operation:

With the touch Stop Return Go to the Menu

Use the arrow Keys change in the operating level Para and take over with

Use the arrow Keys selections the parameter groups KPAD and confirm
With

Use the arrow Keys the MODE parameter wechsein and take over

You might also like