DSP Mayjune 2012
Uploaded by
shankarDSP Mayjune 2012
Uploaded by
shankarVIDYARTHIPLUS.
COM
1
REG . NO :
B.E./B.TECH. DEGREE EXAMINATION, MAY/JUNE 2012
FIFTH SEMESTER
ELECTRONICS AND COMMUNICATION ENGINEERING
EC 2302 / EC52 DIGITAL SIGNAL PROCESSING
(REGULATION 2008)
TIME: THREE HOURS MAX: 100 MARKS
ANSWER ALL THE QUESTIONS
PART A (10 X 2 = 20)
1. WHAT IS TWIDDLE FACTOR?
2. HOW MANY STAGES OF DECIMATIONS ARE REQUIRED IN THE CASE
OF A 64 POINT RADIX 2 DIT FFT ALGORITHM?
3. WHY IS THE BUTTERWORTH RESPONSE CALLED A MAXIMALLY FLAT
RESPONSE?
4. WHAT IS FREQUENCY WARPING?
5. WHAT ARE THE FEATURES OF FIR FILTER DESIGN USING THE
KAISER S APPROACH?
6. DRAW THE DIRECT FORM IMPLEMENTATION OF THE FIR SYSTEM
HAVING DIFFERENCE EQUATION.
y(n) = x(n) 2x(n-1) + 3x(n-2) 10x(n-6)
7. WHAT ARE LIMIT CYCLE OSCILLATIONS?
8. WHAT IS DEAD BAND OF A FILTER?
9. WHAT IS DECIMATION?
10. FIND THE EXPRESSION FOR THE FOLLOWING MULTIRATE SYSTEMS.
QUESTION PAPPER CODE : 11332
VIDYARTHIPLUS.COM
2
PART B (5 X 16=80)
11. (a) (i) DIFFERENTIATE DFT FROM DTFT.
(4)
(ii) COMPUTE AN 8 POINT DFT OF THE SEQUENCE x(n) = (1, 0, 1, -
1, 1, -1, 0, 1)
(12)
[OR]
(b) (i) PROVE THAT FFT ALGORITHM HELPS IN REDUCING THE
NUMBER OF COMPUTATIONS INVOLVED IN DFT COMPUTATION.
(6)
(ii) COMPUTE A 8 POINT DFT OF THE SEQUENCE USING DIT
FFT ALGORITHM x(n) = (1, 2, 3, 2, 1, 0)
(10)
12. (a) (i) EXPLAIN THE PROCEDURE FOR DESIGNING ANALOG FILTERS
USING THE CHEBYSHEV APPROXIMATION.
(6)
(ii) CONVERT THE FOLLOWING ANALOG TRANSFER FUNCTION IN
TO DIGITAL USING IMPULSE INVARIANT MAPPING WITH T = 1 sec.
(10)
[OR]
(b) (i) DESIGN A DIGITAL SECOND ORDER LOW PASS
BUTTERWORTH FILTER WITH CUT-OFF FREQUENCY 2200 Hz USING
BILINEAR TRANSFORMATION. SAMPLING RATE IS 8000 Hz.
(8)
(ii) DETERMINE THE CASCADE FORM AND PARALLEL FORM
IMPLEMENTATION OF THE SYSTEM GOVERNED BY THE TRANSFER
FUNCTION
4
24
4
VIDYARTHIPLUS.COM
3
(1 + Z
- 1
)(1 5Z
-1
Z
- 2
)
H(Z)= (1 +2Z
-1
+ Z
-2
)(1 + Z
-1
+ Z
-2
)
(8)
13. (a) DESIGN AN FIR LOW PASS DIGITAL FILTER BY USING THE
FREQUENCY SAMPLING METHOD FOR THE FOLLOWING
SPECIFICATIONS
CUTOFF FREQUENCY = 1500Hz
SAMPLING FREQUENCY = 15000 Hz
ORDER OF THE FILTER : N = 10
FILTER LENGTH REQUIRED L = N + 1 = 11
(16)
[OR]
(b) (i) EXPLAIN WITH NEAT SKETCH THE IMPLEMENTATION OF FIR
FILTERS IN THE
(1) DIRECT FORM
(2) LATTICE FORM
(6)
(ii) DESIGN A DIGITAL FIR BAND PASS FILTER WITH LOWER
CUT-OFF FREQUENCY 2000 Hz AND UPPER CUT-OFF FREQUENCY
3200 Hz USING HAMMING WINDOW OF LENGTH N = 7. SAMPLING
RATE IS 10000 Hz.
(10)
14. (a) (i) WHAT IS QUANTIZATION OF ANALOG SIGNALS? DERIVE THE
EXPRESSION FOR THE QUANTIZATION ERROR.
(ii) EXPLAIN COEFFICIENT QUANTIZATION IN IIR FILTER.
[OR]
(b) (i) HOW TO PREVENT LIMIT CYCLE OSCILLATION ? EXPLAIN.
(ii)WHAT IS MEANT BY SIGNAL SCALING? EXPLAIN.
15. (a) (i) EXPLAIN SAMPLING RATE CONVERSION BY A RATIONAL
FACTOR AND DERIVE INPUT OUTPUT RELATION IN BOTH TIME AND
VIDYARTHIPLUS.COM
4
FREQUENCY DOMAIN.
(10)
(ii) EXPLAIN THE MULTISTAGE IMPLEMENTATION OF
SAMPLING RATE CONVERSION.
(6)
[OR]
(b) (i) EXPLAIN THE DESIGN OF NARROW BAND FILTER USING
SAMPLING RATE CONVERSION.
(8)
(ii) EXPLAIN THE APPLICATION OF SAMPLING RATE
CONVERSION IN SUB BAND CODING.
(8)
