Scribd
Upload
231 views3 pages

Grade M 25 Mix Design For Concrete

This document provides a mix design for M25 grade concrete. It specifies a characteristic compressive strength of 25 MPa, maximum aggregate size of 20 mm, and good workability. Test data is given for the cement, fine aggregate, and coarse aggregate to be used. The target mean strength is 31.60 MPa. A water-cement ratio of 0.44 is selected based on standard curves. Allowing for 2% air entrapment, the quantities of cement, fine aggregate, coarse aggregate, water, and slump required for 0.98 cubic meters of concrete are specified.

Uploaded by

UmanhgParekh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
231 views3 pages

Grade M 25 Mix Design For Concrete

This document provides a mix design for M25 grade concrete. It specifies a characteristic compressive strength of 25 MPa, maximum aggregate size of 20 mm, and good workability. Test data is given for the cement, fine aggregate, and coarse aggregate to be used. The target mean strength is 31.60 MPa. A water-cement ratio of 0.44 is selected based on standard curves. Allowing for 2% air entrapment, the quantities of cement, fine aggregate, coarse aggregate, water, and slump required for 0.98 cubic meters of concrete are specified.

Uploaded by

UmanhgParekh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Mix Design for Concrete

Grade = M 25

C1.Design stipulation:
i Characteristic Compressive strength

ii Maximum size of aggregate

iii Degree of workability


iv Degree of quality
v Type of Exposure

=
=
=

C2. Test data for materials


(i) Cement used
(ii) Specific gravity of Cement
(iii) Specific gravity

25
20
0.8

N/mm2
mm
Good
Mild

Fine Aggregate
Coarse Aggregate
(iv) Water absorption

2.8
2.61

Fine Aggregate

2.1
0.78

=
=

2.1

%
Nil %

31.60

N/mm2

0.44

(From fig. 1, Is 10262)

Coarse Aggregate
(v) Free Surface Moisture

Fine Aggregate
Coarse Aggregate
(vi) Fine Aggregate confirming the table 4,
383- Zone

IS

PPC

Zone

C3.Target mean strength

C4. Selection of Water Cement ratio


Water Cement ratio

C7. Determination of Fine & Coarse aggregate


Air entrapped in concrete
Actual quantity of concrete "V"

=
=

% (From Table 3, IS 10262)


0.98 Cum

Materials required for concrete


Grade M 25
1
Concrete quantity
=
Sl.
No

Material name

Cum

Quantity

Unit

1 Cement

422.73

kg

2 Fine Aggregate

565.72

kg

3 Coarse Aggregate 20mm

709.71

kg

4 Coarse Aggregate 10mm

473.14

kg

Prepared by,

5 Water

183.63

ltr

6 Slump

75 - 100

mm

Sathiyaseelan

7 W/C ratio

0.44

+91 8894770272

You might also like