Scribd
Upload
116 views1 page

Reveal 3-D For Gluten Procedure: Rinse Sampling

This document provides instructions for using the Reveal 3-D for Gluten test kit. It outlines the sampling and testing procedures in 5 steps for both rinse and swab sampling. The rinse sampling detects gluten at 5-10 ppm and swab sampling detects gluten at 80 μg/100 cm2. Results are read after 5 minutes and can be positive, high positive, or negative. The kit contains everything needed for testing including devices, tubes, buffers, and swabs.

Uploaded by

Muhammad Adnan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
116 views1 page

Reveal 3-D For Gluten Procedure: Rinse Sampling

This document provides instructions for using the Reveal 3-D for Gluten test kit. It outlines the sampling and testing procedures in 5 steps for both rinse and swab sampling. The rinse sampling detects gluten at 5-10 ppm and swab sampling detects gluten at 80 μg/100 cm2. Results are read after 5 minutes and can be positive, high positive, or negative. The kit contains everything needed for testing including devices, tubes, buffers, and swabs.

Uploaded by

Muhammad Adnan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Reveal 3-D for Gluten Procedure

Note: Please read kit instructions completely before performing test.


Questions? Call 800/234-5333 or 517/372-9200.

Rinse Sampling

1. Open Type 4 extraction buffer


sachet and add to a sample tube.

2. Add 0.25 mL of sample to the


sample tube.

3. Secure cap and shake for 1


minute.

4. Add contents of Type 5 extraction


buffer sachet to tube and shake for
1 minute.

2. Gather the sample. For dry surfaces


moisten with extraction solution. Do
not premoisten for wet surfaces.

3. Return the swab to the extraction


buffer and break off into the tube.

4. Secure cap and shake for 1


minute.

2. Dip the Reveal 3-D device into the


liquid in the lid; ensure that the
cavity is saturated with the liquid.

3. Leave the cavity saturated until


the liquid is seen running into the
test window.

4. Place the device on a flat surface


and allow the test to develop for
5 minutes.

Swab Sampling

1. Open Type 4 extraction buffer


sachet and add to a sample tube.

5. Add contents of Type 5 extraction buffer


sachet to tube and shake for 1 minute.

Sample Testing

1. Remove the lid and fill with liquid


from the tube.

High Positive

Positive

Negative

5. Interpret the results.


Neogen Corporation 2012. Neogen and Reveal are registered trademarks of Neogen Corporation, Lansing, Mich.

#901031P
Rinse: 510 ppm
Swab: 80 g/100 cm2
Testing time: 5 minutes

Reveal 3-D for Gluten


Materials Provided
10 green test devices
10 sample tubes and caps
10 sachets of Type 4 extraction buffer
10 sachets of Type 5 extraction buffer
10 sterile swabs

Call 800/234-5333 to order or


visit us online at www.neogen.com
R-3D-Gluten-0412

You might also like