Scribd
Upload
401 views

Quiz 1 - Answer

The document contains answers to 4 quiz questions about networking concepts: 1) The total end-to-end delay to send a packet between two hosts connected by a single switch is the sum of the transmission delays over each link. 2) The components of end-to-end delay are processing, transmission, propagation, and queuing delays. All but queuing delays are constant. 3) Propagation delay depends only on distance and speed - not packet length or transmission rate. 4) Throughput for a file transfer depends on the minimum link rate. Given file size and throughput, transfer time can be calculated.

Uploaded by

Sampath Sree
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
401 views

Quiz 1 - Answer

The document contains answers to 4 quiz questions about networking concepts: 1) The total end-to-end delay to send a packet between two hosts connected by a single switch is the sum of the transmission delays over each link. 2) The components of end-to-end delay are processing, transmission, propagation, and queuing delays. All but queuing delays are constant. 3) Propagation delay depends only on distance and speed - not packet length or transmission rate. 4) Throughput for a file transfer depends on the minimum link rate. Given file size and throughput, transfer time can be calculated.

Uploaded by

Sampath Sree
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

QUIZ 1 - ANSWER

1. Suppose there is exactly one packet switch between a sending host and a
receiving host. The transmission rates between the sending host and the
switch and between the switch and the receiving host are R1 and R2,
respectively. Assuming that the switch uses store-and-forward packet
switching, what is the total end-to-end delay to send a packet of length L?
Answer: end-to-end delay = L/R1 + L/R2
Explanation: At time t0 the sending host begins to transmit. At time t1 = L/R1,
the sending host completes transmission and the entire packet is received at
the router (no propagation delay). Because the router has the entire packet at
time t1, it can begin to transmit the packet to the receiving host at time t1. At
time t2 = t1 + L/R2, the router completes transmission and the entire packet is
received at the receiving host (again, no propagation delay).
2. Consider sending a packet from source host to a destination host over a fixed
route. List the delay components in the end-to-end delay. Which of these
delays are constant and which are variable?
Answer: The delay components are processing delays, transmission delays,
propagation delays, and queuing delays. All of these delays are fixed, except
for the queuing delays, which are variable.
3. How long does it take a packet of length 1000 bytes to propagate over a link
of distance 2,500 km, propagation speed 2.5x10^8 m/s, and transmission
rate 2 Mbps? More generally, how long does it take a packet of length L to
propagate over a link of distance d, propagation speed s, and transmission
rate R bps? Does this delay depend on packet length? Does this delay depend
on transmission rate?
Answer: tprop = d/s = 2500x103/(2.5x108) = 10.00 msec; no; no
4. Suppose Host A wants to send a large file to Host B. The path from Host A to
Host B has 3 links, of rates R1 = 500 kbps, R2 = 2 Mbps and R3 = 1 Mbps.
a) Assuming no other traffic in the network, what is the throughput for
the file transfer?
Answer: The min throughput available = 500 kbps
b) Suppose the file is 4 million bytes. Dividing the file size by the
throughput, roughly how long will it take to transfer the file to Host
B?
Answer: File size/throughput = 4x106x8 / (500x103) = 64 s
c) Repeat (a) and (b), but now with R2 reduced to 100 kbps.
Answer: 100kbps; 320 seconds

You might also like